データ : 30.new.mps
コンパイラ : gcc 4.8.5
○ GLPK 4.65 : 19.145s
○ CBC 2.10.3 : 9.100s
○ SCIP 6.0.2 : 30.159s
○ CPLEX 12.9 : 378.32s
○GUROBI 8.1.1 : 7.09s
◯計算サーバ
CPU : Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz x 1個
メモリ:32GB
GPU : GeFroce RTX 2080 x 1個
OS : CentOS 7.7
# cpupower frequency-info
analyzing CPU 0:
driver: intel_pstate
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: Cannot determine or is not supported.
hardware limits: 800 MHz - 4.70 GHz
available cpufreq governors: performance powersave
current policy: frequency should be within 800 MHz and 4.70 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency: 4.55 GHz (asserted by call to hardware)
boost state support:
Supported: yes
Active: yes
コンパイラ : gcc 4.8.5
○ GLPK 4.65 : 19.145s
○ CBC 2.10.3 : 9.100s
○ SCIP 6.0.2 : 30.159s
○ CPLEX 12.9 : 378.32s
○GUROBI 8.1.1 : 7.09s
◯計算サーバ
CPU : Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz x 1個
メモリ:32GB
GPU : GeFroce RTX 2080 x 1個
OS : CentOS 7.7
# cpupower frequency-info
analyzing CPU 0:
driver: intel_pstate
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: Cannot determine or is not supported.
hardware limits: 800 MHz - 4.70 GHz
available cpufreq governors: performance powersave
current policy: frequency should be within 800 MHz and 4.70 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency: 4.55 GHz (asserted by call to hardware)
boost state support:
Supported: yes
Active: yes