WO2014066178
[0031] However, the imaging colorimeters and photometers have a lower measuring precision than spectrometers.
【0005】
しかし、イメージング光度計及び測色計の絶対測定精度は分光計ほど高くはない。
This is because imaging colorimeters operate using a CCD (charge-coupled device) sensor in combination with optical filters.
これは、限度のある精度でしか人間の眼の感度に適合させることができない光学フィルタと組み合わせてCCDセンサを用いる、動作原理のためである。
For example, in the case of the Bayer filter, there are only three types of color filters (i.e., red, green, and blue), so there is lacking the precision found in spectrometers, where the visible spectrum can be partitioned by increments ranging from 1 to lOnm, resulting in 30-200 channels.
Therefore, in a spectra-camera used for display testing, the imaging colorimeters are best utilized for measurement of luminance and color distribution of panel graphics and control elements, including but not limited to homogeneity, contrast, mura (i.e., luminance non-uniformity of a display device) and MTF (Modulation Transfer Function).
したがって、イメージング測色計は、パネルグラフィックスの輝度及び色の分布、並びに、均一性、コントラスト、ムラ及び変調伝達関数(MTF)を含むがこれらには限定されない、ディスプレイ検査工業における制御要素の測定のための最善の計器である。
[0037] In one embodiment, a spectra-camera can perform parallel testing, where display artifact testing can occur with the spectrometer on.
【0029】
一実施形態において、分光-カメラは、ディスプレイアーティファクト検査を分光計で行うことができる、並行検査を実施することができる。
The display artifact testing can detect various defective display symptoms, such as LED hotspot, dot defect, yellow mura, and line defect.
ディスプレイアーティファクト検査は、LEDホットスポット、ドット欠陥、黄色ムラ及び線欠陥のような、様々なディスプレイの欠陥症状を検出することができる。
Concurrently, the spectrometer can be used to perform display parametric testing, so that basic attributes, such as brightness, contrast, color gamut, gamma, etc., are measured.
同時に、輝度、コントラスト、色域、ガンマ,等のような、基本属性が測定されるように、ディスプレイパラメータ検査を行うために、分光計を用いることができる。
yellow mura: 日本語の「ムラ」由来?
US20160231175
Individual X, Y, and Z maps of the corrected map of tristimulus values are then output via a display device 121 in order to assess color uniformity as well as different types of artefacts (line defects, pixel defects, black Mura, yellow Mura etc.). Such artefacts may also be detected in an automated fashion by a corresponding image processing programming of the controller 119.
US20170240771
Liquid optically clear adhesives (LOCAs) have become prevalent in the display industry to fill the air gaps between substrates. For example, LOCAs are often used to fill in the gap between a cover lens and touch sensors, touch sensors and a liquid crystal module, or directly between a cover lens and a liquid crystal module. Most LOCAs are UV curable acrylates and/or silicone resins. The display configurations are typically built from the front/top of the display backwards, such that the cover lens (with a light absorbing ink step) is bonded to a touch sensor to form a stack, and subsequently bonding the stack to the LCD module and/or AMOLED stack. For optical reliability and display performance, it is critical to cure all of the LOCAs, even those coated outside the viewing area and under the ink step, to prevent display defects such as yellow mura and light leakage, or cosmetic defects such as oozing. While a UV transparent ink could be used (e.g. WO2012071144), this is not a common practice in the industry. Quite often the light absorbing ink step does not transmit UV light, leading to either insufficient or no cure under the ink step.
(実例は少ない)
US2019318505
[0036] To determine the skin tone of a person, the invention makes use of a technology based on an imaging system.
【0027】
人の肌の色調を特定するために、本発明は撮影システムに基づく技術を使用する。
This makes it possible to avoid touching the person's face and to make a diagnosis for the whole face, taking into account color irregularities in the face.
これは、顔の色ムラを考慮して、人の顔への接触を回避し、顔全体の診断を行うことを可能とする。
Finally, this choice of technique allows implementation with a wide range of image capture media, in particular using tools such as smartphones, tablets, or mirrors provided with an image capture device.
最後に、この技術の選択は、広範囲の撮影媒体を用いた、特に、撮影デバイスが設けられたスマートフォン、タブレット又は鏡等のツールを用いた実行を可能とする。
EP2177954
[0095] Testing of the formulations with 1.25% small silica and 0.3% ESPRIX 1451 from Esprix Technologies showed low background, no toner additive buildeup (TAB), minor mottle and no cleaning defect issues.
【0099】
1.25%小シリカおよびエスプリテクノロジー社の0.3%エスプリ1451を用いた配合物の試験では、バックグラウンドが低く、トナー添加剤の蓄積(TAB)がなく、色ムラがわずかであり、クリーニングに欠陥がないことが示された(以下の表1を参照)
。
(See Table 1 below.) Q/M off the Developer is summarized below in Table 1.
現像剤から得られたQ/M(電荷対質量比)を以下の表1に要約する。
WO2017067781
The second optical element may be configured to shape light having been in- coupled therein such that only light, the light rays of which have an angular distribution within the angular distribution of the light rays of the light which is in-coupled into the second optical element and which is of the first wavelength range, is out-coupled from the light out-coupling surface of the second optical element.
【0040】
第2の光学要素は、第2の光学要素にインカップルされた第1の波長範囲の光であって、その光線光の光線の角度分布内の角度分布を有する光のみが、第2の光学要素の光アウトカップル面からアウトカップルされるように、インカップルされた光を成形するように構成され得る。
Such capability of capacity of the second optical element may be provided in alternative or in addition to providing the lighting device with the at least one first optical element such as described in the foregoing.
第2の光学要素の能力のそのような特性は、上記で説明されたような少なくとも1つの第1の光学要素を有する照明デバイスを提供することに代えて又は加えてもたらされ得る。
Such capability of capacity of the second optical element may be implemented or realized for example by appropriately choosing the materials of the light guide and the second optical element so that they have selected refractive indices.
第2の光学要素の能力のそのような特性は、例えば、光ガイド及び第2の光学要素が選択された屈折率を有するようにそれらの材料を適切に選ぶことによって、実施又は実現され得る。
By means of such capability of capacity of the second optical element - while again considering the above-mentioned example where blue and green light is generated within the light guide by means of the light conversion carried out by the segments while red light is in-coupled into the light guide -
セグメントにより行われる光変換によって青色光及び緑色光が光ガイド内で発生される一方で、赤色光が光ガイドにインカップルされる上述された例について再び考察すると、
the part or portion of the blue and green light, which arrives at the light out-coupling surface by way of TIR and that has an angular distribution of light rays which is not present in the red light arriving at the light out-coupling surface by way of TIR, may be rejected, or blocked, such that it is not out-coupled from the light guide.
第2の光学要素の能力のそのような特性によって、TIRにより光アウトカップル面に到達する青色光及び緑色光のうち、TIRにより光アウトカップル面に到達する赤色光には存在しない光線の角度分布を有する一部又は一部分が、光ガイドからアウトカップルされないように拒絶又は遮断され得る。
Thereby the phase space of the red light out- coupled from the light guide may be the same or substantially the same as the phase space of blue and green light out-coupled from the light guide.
これによって、光ガイドからアウトカップルされた赤色光の位相空間は、光ガイドからアウトカップルされた青色光及び緑色光の位相空間と同じ又は実質的に同じとなり得る。
In this way, a beam of light output from the lighting device may exhibit a relatively low or even no color non-uniformity.
このようにして、照明デバイスから出力された光のビームは、比較的少ない色ムラを示し得る、又は色ムラを示さなくなり得る。