AT200 ECU Programmer Feather:
1.BMW AT-200 support BMW ECU Data reading, writing and clone, like MSV90 MSD85 MSD87 N2055 B38 B48
2.Support BMW IMMO functions, read BMW ISN Code by OBD.
3.Original from CGDI, Free update online.
CGDI BMW AT-200 released notes:
1.new: can read ISN for MSD80, MSD81
2.new: add wiring diagram TC1793, TC1793S
3.new: add TC1767
4.updated: AT200 version 432 ECUs
This article shows the procedures on reading & decoding BMW CAS4 5M48H with XPROG-M Programmer.
Procedures:
Remove BMW CAS4 module and get 5M48H controller from PCB
Then weld it on the XPROG-M adpater
Run XPROG software,and click [Device] button
Select [Immobilizers]–>[CAS4 1N35H 5M48H…1030 v1]–>[1N35H_5M48H_D-FLASH_v1]
Now click [Read] button
The XPROG-M programmer indicate light will flash
Progress…
It will show you with the information as below
After then you can get the D-Flash data,save it on you laptop
Launch X-431 V+ HD3 is a modified version of the multi-brand scanner Launch X-431 Pro
which, in its new edition, received a more powerful tablet and a
diagnostic function for heavy duty vehicles. The device includes all the
advantages of the Pro series and is presented with advanced diagnostic
algorithms that allow you to quickly and deeply test the car. The
complete set HD – is intended for trucks diagnostic.
Launch X431 HD3 Functions：
Identification of control units
Adaptation of control units
Reset service intervals
Reading vehicle data streams
Display of current system parameters
Check actuators
Reading and erasing vehicle fault codes
Supported heavy duty vehicle list:
Europe:
MERCEDES BENZ
MAN
VOLVO
SCANIA
IVECO
DAF
RENAULT
US:
Freightliner
INTERNATIONAL
Kenworth
PETERBILT
STERLING
WESTERN STAR
MACK
DETROIT
CUMMINS
Asia:
HINO
FUSO
ISUZU
UD
HYUNDAI
Question:
I have installed Xentry 9.2014 in Mb Star C3 multiplexer. It works well so far. Now, I need to make diagnosis on mercedes w205 year 12/2014 but It can not communicate with the car. C3 don’t work in all recent cars in xentry but in DAS is ok.
Experienced users’ suggestion:
C3 has many limitation regarding latest vehicles in Xentry.
It can’t diagnose it e.g w205, w212, w222, w906, smart 453 etc.
its glory is already passed unless you deal only with vehicles in DAS.
you have to change to MB star Compact C4.
C4’s support also officially has been stop since 12-2015.
It is no different even you change folder.
it is different protocol with recent vehicles.
For your w205 (nice car) you can use one of this :
1.sd connect c4
2.xentry sd connect c5
Both good at all new Mercedes Benz models,W222, W221, W212, W203, 211,W 204,W207, W212, GL166, B 246, CLS 218, SLK172 and Smart405, 451, 452, 454
Besides the MB Star diagnosis software c3 and c4 own, sdconnect c4/c5 added three more software: SD Media, Xentry and Smart TAN Code.
SD Media: Video and PDF lessons;
Xentry: New software released by Benz Company after 04/2009 by diagnosis new cars. Xentry software for diagnosing W 204,W207 and W212 which C3 and C4 does not support;
Smart TAN Code: Opened special function in DAS program with Smart cars 405/ 451/452/ 454.Besides, it also opened more special functions, such as engineer mode, remove limitations,etc, which Star C3 and Star C4 do not have.
I have successfully communicated wit my w205 AMG using a MB SD C4 connect all controllers accessed.
