Lonsdor K518ISE Program Toyota RAV4 2008 All Keys Lost via OBD

Lonsdor K518ISE Key Programmer another passed model: Toyota RAV4 2008 Smart key programming success- no working key, SKE-LT-DST40(94/D4) -94/D4 smart key emulator is required.

Black: SKE-LT-DST40(94/D4) -Supports 94/D4 smart key

Procedure:

Connect Lonsdor K518 with vehicle via OBD socket

Select Immobilizer->Toyota->Select from Type->All smart key lost->All key lost->Backup EEPROM

This function can back up car eeprom data
When backup complete, go to Make emulator key in network environment to make a spare original
Use the spare original key to add key

Reading car data, wait for 3 minutes or so

Save eeprom data

Backup eeprom data completed.

Go to Make emulator key function.

This function can make a spare master key when all keys lost. The key can replace the original master key to turn on the dashboard and add key.

Select eeprom data saved above

Lonsdor K518ise detects current eeprom information
The number of keys: 2
Key type: 94

Place the emulator key (black) into K518 card slot, press the round button

Programming key, please wait about 5 minutes

Key generation completed.
Check the emulator key round button, and close it to the ignition. Try to turn on the dashboard, if the dash can be turned on normally, use the emulator key instead of the original key to add/program new key.

Related post:

Here’s an example on using the K518ISE English machine to make Lexus ES200 all keys lost

How to Renew Lonsdor K518ISE Firmware Program

Question:When I update my Lonsdor K518ISE Key Programmer ,it’s failed”Run APP Failed,unknow error”or”update faild,APK version:v1.5.17″

Answer:Pls try Renew Lonsdor K518ISE Firmware Program

Procedure:

1. Download and unzip the attached file, you will get     
and

2. Install and then open the
. 3. Use a USB cable to connect your K518ISE to a computer.

4. ① Click the button in red first.

② Click the button in black next.

③ Find the fileLonsdor-K518ISE-6 and click it (marked in
red, step 1).

④ Then click the button marked in black (step 2).

5. Hold on the power key and you will see interface below. Click the
button marked in red. And immediately hold on the volume+ key until
you see a progress bar in the computer.

6. Two windows will pop up, just click YES.

7. Update firmware successfully. Pull out the USB cable and wait the
device to automatically repair.

8. Don’t touch the device. You will see a white screen and there are two
buttons (set up WIFI and update).

9. Set up WIFI and then update. The problem will be solved after
updating.

GM MDI Clone Scan Tool Unboxing Review and Setup ACDelco TDS Intro

This article goes thru unboxing and setup of the best quality GM Multiple Diagnostic Interface (MDI) clone / replica example, comparison with the prior generation GM Tech2 scan tool, and how to reflash (recover) the MDI device firmware and configure the settings using the Bosch MDI Manager for Windows 7 and up, and finally an intro overview of the ACDelco TIS2Web / TDS website subscription options / features.






The GM MDI replaced the Tech2 as the J2534 dealership scan tool starting with the 2008 model year, though there was some overlap with existing models thru 2013 when the Tech2 was finally no longer supported for new vehicles. For new models introduced from 2010 and later, the GM MDI or MDI 2 are the only diagnostic and calibration programming tools utilized at your GM dealer.

The MDI is not compatible with the legacy DVD based TIS2000 and only works with TIS2Web online, where you can use either SPS or the Global Diagnostic System (GDS) 2 online software. You can also subscribe to the Tech2Win software at www.acdelcotds.com which is a Tech2 emulator for working on vehicles prior to the 2008 model year in lieu of a physical Tech2 tool.

The reviewed Car Scanner MDI knock-off / clone / replica tool has a S/N of 22129579 (all of them from this factory have the same serial number) and supports all Chevrolet, Buick, Cadillac, Oldsmobile, Pontiac, Saturn, GMC, Hummer, Opel, Vauxhall, Isuzu, Saab, Daewoo and Holden makes and models of the applicable years. I purchased it on obd2tool.com