gooブログはじめました!

写真付きで日記や趣味を書くならgooブログ

Xtool X100 Pad2 Program Nissan Qashqai 2019 Key successfully

2022-01-29 21:53:43 | 日記

 Nissan Qashqai 2019 was programmed successfully without reading the PIN code or unlocking the steering wheel lock with XTOOL X100 Pad2.
It’s my first time programming Qashqai 2019 so I want to share the tip
start button, wait 5 seconds and that’s it. The key is not originally
generated. The car is imported from Europe.


Xtool-X100-Pad2-Program-Nissan-Qashqai-2019-Key-successfully-2


Here is the xtool x100 pad2 NISSAN Qashqai Function List V27.14 claimed by the manufacture.


1. Nissan Qashqai from China:
With smart key system (20 pincode): program smart keys.
Without smart key system (20pincode): program key


2. Nissan Qashqai from Europe:
2007 -2009: program remote  – Fault code, erase DTC, program keys.
2009-2013: program remote – Erase DTC, program keys, release steering lock
2009-2013: Mechanical key – Erase DTC, program keys, release steering lock
2009-2013: Smart key system – program smart keys, erase all smart keys, program steering lock
2014 – : Immobilizer system  – Type1 – program smart keys
2014 -: Immobilizer system  – Type2 – program key


Xtool-X100-Pad2-Program-Nissan-Qashqai-2019-Key-successfully-1


Good to know:
Obdstar X300 Pro4 / obdstar X300 DP Plus is also able to program Nissan Qashqai 2019 Prox all keys lost via obd.


Autel CAN FD Adapter Program Chevrolet Onix 2021 all keys lost with IM608 successfully

2022-01-29 21:53:43 | 日記

 Autel CAN FD Adapter
can expand the support of the CAN FD protocol to specifically support
the diagnosis of some new models. Such as 2020+ GM models, 2018- Ford
models. The CAN FD Adapter must be used with a supported Autel
VCI(vehicle communication interface) to communicate with applicable
vehicles.


Program Chevrolet Onix 2021 all keys lost with IM608 successfully:


Workable Autel Diagnostic Tools:
Gen 1 Autel MaxiSys units: MX808/MP808, MS905, MS906, MS906BT, MS906TS, MS908, MS908P, MSELITE.
Gen 2 Autel MaxiSys units: MaxiADAS, MS908S, MS908SP, IM508, IM608, IM608 Pro
Note: Autel Gen 3 units: Ultra, MS919 or MS909 have already supported the protocol, no need for this adapter.


Need to use CAN FD Adapter & get a password from the third party.
All keys lost will clear all previous keys. Finally learning 1 new key
successfully.


Autel-CAN-FD-Adapter-Program-Chevrolet-Onix-2021-all-keys-lost-with-IM608-successfully-1
Autel-CAN-FD-Adapter-Program-Chevrolet-Onix-2021-all-keys-lost-with-IM608-successfully-2
Autel-CAN-FD-Adapter-Program-Chevrolet-Onix-2021-all-keys-lost-with-IM608-successfully-3
Autel-CAN-FD-Adapter-Program-Chevrolet-Onix-2021-all-keys-lost-with-IM608-successfully-4
Autel-CAN-FD-Adapter-Program-Chevrolet-Onix-2021-all-keys-lost-with-IM608-successfully-5