AT200 ECU Programmer Feather:
1.BMW AT-200 support BMW ECU Data reading, writing and clone, like MSV90 MSD85 MSD87 N2055 B38 B48
2.Support BMW IMMO functions, read BMW ISN Code by OBD.
3.Original from CGDI, Free update online.
CGDI BMW AT-200 released notes:
1.new: can read ISN for MSD80, MSD81
2.new: add wiring diagram TC1793, TC1793S
3.new: add TC1767
4.updated: AT200 version 432 ECUs
This article shows the procedures on reading & decoding BMW CAS4 5M48H with XPROG-M Programmer.
Procedures:
Remove BMW CAS4 module and get 5M48H controller from PCB
Then weld it on the XPROG-M adpater
Run XPROG software,and click [Device] button
Select [Immobilizers]–>[CAS4 1N35H 5M48H…1030 v1]–>[1N35H_5M48H_D-FLASH_v1]
Now click [Read] button
The XPROG-M programmer indicate light will flash
Progress…
It will show you with the information as below
After then you can get the D-Flash data,save it on you laptop
