WLAN Settings Tutorial for C4 / C5 Doip Plus & SD C4 / C5

 

This article explains in detail how to set up a Wlan connection for both DOIP SD C4 / C5 Doip Plus and SD C4 / C5,
which provides great help for many users who use the tools for the
first time. Generally speaking, the Wlan connection setting method of C4
/ C5 Doip Plus is much simpler than that of SD C4 / C5.

Part 1. How to set up Wlan connection for Mercedes Star MB SD C4 / C5 Doip Plus?

Part 2. How to set up Wlan connection for old SD C4/C5?

Part 1. How to set up Wlan connection for MB SD C4 / C5 Doip Plus?

Firstly, to do IP Setting for LAN, then open Local Area Connection on task bar to find the available WIFI name of C4 or C5 Doip.

Select the correct one to connect, enter wifi password “123456789“, please set auto obtain IP.

SD C4/C5 DoIP Plus wireless setting is done.

Part 2. How to set up Wlan connection for old SD C4/C5?

Step 1. Set IP for LAN, local Area Connection

Step 2. Set wireless IP

Step 3. Connect MB SD C4/C5 device to PC, open the “Administrator” of C4/C5, to set as required by following below information.

Step 4.Open Road24h Ad-Hoc Connector for C4 Mux

Click –1– Make Road24h Ad-hoc Profile and –2– Connect to MUX via Road24h step by step.

Step 5.Enter security key

Step 6. Disconnect the sd c4/c5 device, but don’t turn off the power.

Step 7. Select “Selection” option on task bar.

Step 8. Select the SD connect after opening the administrator.

WLAN setting is done!

New Holland Electronic Service Tools

The software is 9.4 9.2 engineering level, CNH EST 8.6 software is
dealer level.engineering level has more functions than dealer level and
CNH 9.4 9.2 is with diagnostic procedure.

NOTE:
1.If you choose Heavy Duty Truck Software CNH EST 8.6 Dealer Level Software, we will provide you with a registration machine, and you can activate the software yourself
2.If you choose CNH EST 9.4 9.2 Dealer Level Software for 1 PC activation (we will remote help you installation by teamviewer) Full license

Supported languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.

The brand new version of New Holland CNH EST works with OS Windows 8 64 bit / 8.1 64 bit / 10 64 bit, except Home
editions). If you have windows 7, we can offer you a previous version of
CNH EST, as the 9.4 versions no longer support Windows 7 and in some
cases won’t even loading.

New minimum PC specifications
All computers must use a 64-bit version of their operating system. The
older 32bit options are limited to 4 gigabytes of RAM, and cannot
provide enough performance to run these programs.

Minimum Specifications
Processor: Intel Core i5 Processor or higher;
RAM Memory: 8 GB or greater;
Operating System: Windows OS: 64-bit (Mandatory)
Windows 7
Windows 8.x
Windows 10 (Recommended)
Hard Drive: 250 GB or greater;
Ports: One 9 pin Serial port (preferred) OR USB to RS-232
Converter – FTDI Chipset)
Two USB ports
10/100 Ethernet
WiFi 802.11b / g
Bluetooth
Mobile Wireless (recommended)

The following brands of the CNH group are covered:
New Holland (Agriculture and Construction)
New Holland FK (Fiat-Kobelco)
New Holland O&K (Orenstein & Koppel)
CASE (Agriculture and Construction)
STEYR
KOBELCO
Iveco (Astra) (articulated dump trucks only)
Flexi-Coil
Sumitomo (S.H.I.)
Link-Belt

New Holland Electronic Service Tool allows you to:
• Check the status of parameters;
• Retrieve faults;
• Run diagnostic tests;
• Make ECU and parameter programming;
• Monitor active and logged diagnostics;
• View and change ECU configuration;
• View diagnostic procedures and schematics.
• Troubleshoot problems;
• Run scope diagnostics;

E.A.S.y – additional engine diagnostic and download tool for
connection directly to ECU to perform diagnostic, programming and ECU
reload by K-Line protocol.

CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:
• Provide Engine Control Unit (ECU) programing update capability;
• Provide blank ECU initialization and programming capability;
• Provide ECU programming reassignment for blank and other ECUs;
• Provide ECU download crash recovery.

NOTE:
This DPA5 can  perform diagnostic, programming and ECU reload by K-Line protocol with E.A.S.y software for Iveco engines.

CNH DPA5 Interfaces OEM 380002884. This interface is  Working 2 CAN
and K line ( for diagnostic CASE and New Holland with IVECO Engine with
EASY under EST

Second Hand Laptop Lenovo T420 Laptop Specification ：
Brand: Lenovo
Condition: Used
Type:  Laptop/Notebook
Screen Size:  14.0
Processor Type:  Intel (R) Core(TM) I5-2520M CPU
Processor Speed:  2.50 GHz
Processor Configuration:  Dual Core
Memory: 4GB
Compared with other laptop, this one is better quality and run faster.

Package :
1.cnh est DVD for 1 PC activation (we will remote help you installation by teamviewer )
2 .Dearborn Protocol Adapter 5 (DAP5 white interface) full New interface for New holland and Case
3.Usb cable
4.New 9-pin Deutsch CNH cable
5.ToolBox
One Year Warranty

Software display: