35-6200MHz RF Spectrum Analyzer w/Tracking Generator(Arinst SSA-TG R2) 補足 No.1
ElectronicsDIY5 web shop
www.shop-online.jp/ElectronicsDIY5/
Arinst製品の日本代理店(Dealer)として、すべてのお取り扱いをしています。
*********************************
(New considering matters)
About the mesurement of the frequency responce under 35MHz
I am considering how I do measure my 7MHz BPF with SSA-TG R2.
I am getting the mixer board for the purpose of down-converting,and I plan to make LPF like 10MHz,then I use the external local from SSG.
If you hope the mixer board,I only provide this mixer board itself.Plz contact to me!!
*********************************
I had already reported before that I couldn't set the amplitude offset as minus,like -125MHz.I am sorry too late to confirm the newer PC-Based software "Arinst SSA-UNV as the versin 1.0.2,and also SSA-TG R2's firmware version 1.0.7.
Now we can set the offset,both the frequency(even minus value) and amplitude!!
For instance,when we use the up-converter,the local oscillator's ferequency of which is 125MHz,we can measure sine wave 10MHz,-10dBm.
Plz look at the below pictures.
We can set the offset for the actual frequency(set the local oscillator's ferequency as -125MHz in this case)
SSG sine wave 10MHz(more than 1x10E9),-10dBm/SSA SSA-TG and Up-converter(my shop's option)
We can set the offset for the conversion loss -10dB.
(I confirmed above,with Windows Home 64bit/Beelink S2/Windws Version 1803)
(Caution)If you don't install JAVA runtime,plz install it in advance.
