USB 2.0 to IDE SATA 5.25 S-ATA/2.5/3.5 Adapter Cable
ElectronicsDIY5 web shop
http://www.shop-online.jp/ElectronicsDIY5/
2980円（税抜き)
定形外 送料無料
現時点、在庫状態
Description
Look no further. Amazing product quality, that's solidly built.
Best of all, its very affordable price. Buy instantly.
A must have tool kit for data transfer, backup and cloning
Turn any SATA/IDE drive into a convenient external drive, could be used as a bridge to connect SATA HDD, 2.5" hard disk, 3.5" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface
Hi-Speed USB interface provides for easy installation with its plug and play design
Light weight, lowest cost mobile storage solution
Compliant with both USB 2.0 and USB1.1 plug and play
High-speed up to 480Mb/s data transfer rate and 52X write speed
Support IDE, enhanced IDE and S-ATA hard drives
Support installation of SATA HDD, 2.5" hard disk, 3.5" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW externally Three connectors: One IDE 44 Pin connector for internal 2.5 inch HDD; One IDE 40 Pin connector for internal CDRW, DVDRW, CD Rom, DVD Rom, 3.5 inch Hard disk, COMBO DRIVE etc; One SATA connector for SATA devices.
External AC power (not included) input 90v-264v needs to be used to supply power to SATA/IDE device
System requirements: Windows 98, 98SE, ME, 2000 and XP
Note: AC power adapter is not included
Note 2: This product supports 2.5SATA, 3.5SATA and 2.5IDE but not 3.5IDE.
1 x USB to IDE cable
1 x 4 Pin power cable
1 x SATA cable
1 x Manual
Best of all, its very affordable price. Buy instantly.
A must have tool kit for data transfer, backup and cloning
Turn any SATA/IDE drive into a convenient external drive, could be used as a bridge to connect SATA HDD, 2.5" hard disk, 3.5" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface
Hi-Speed USB interface provides for easy installation with its plug and play design
Light weight, lowest cost mobile storage solution
Compliant with both USB 2.0 and USB1.1 plug and play
High-speed up to 480Mb/s data transfer rate and 52X write speed
Support IDE, enhanced IDE and S-ATA hard drives
Support installation of SATA HDD, 2.5" hard disk, 3.5" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW externally Three connectors: One IDE 44 Pin connector for internal 2.5 inch HDD; One IDE 40 Pin connector for internal CDRW, DVDRW, CD Rom, DVD Rom, 3.5 inch Hard disk, COMBO DRIVE etc; One SATA connector for SATA devices.
External AC power (not included) input 90v-264v needs to be used to supply power to SATA/IDE device
System requirements: Windows 98, 98SE, ME, 2000 and XP
Note: AC power adapter is not included
Note 2: This product supports 2.5SATA, 3.5SATA and 2.5IDE but not 3.5IDE.
1 x USB to IDE cable
1 x 4 Pin power cable
1 x SATA cable
1 x Manual