The outline of FSCC06 Selective Spray Coater
Selectable coating used by low and middle viscosty material.
Water-based material , Solvent-less material
(10-1500CPS)
Solvent type material (10-1000CPS)
It's possible to reduce dryness speed substantially.
The touch drying time： Shortening of less than 50%
Consumption of the solvent：Reduction of more than 60%
Film thickness of the sharp edge part： Improvement of
more than 200%
FSCC06 has special parts are caused tornado air to get fine atomization and no splashing. This was borne by the following example. There are plaster’s bolls are made from this pan. If plaster worker threw a mere straight ball to a wall, we can see some splashes around a mark of ball. The next mark of ball was caused by screwball. This is just basis of FSCC06 spray coater.
SA Type Film Coating System Of Shimada Appli
Proper film coating
The important conditions of a film coat are the speed of a liquid, pressure, a nozzle, and liquid temperature. Especially fluid pressure is a main factor for pattern formation in it. Although fixed liquid pressure leads to good pattern formation, the flow velocity of a liquid is too quick, and becomes an imperfect film, and high fluid pressure causes scattering.
