Features of Operating Lamps

Operating lamp is actually different from the essence of ordinary light is to achieve the special requirements of surgery. First, operating room lighting brightness requirements, two, safe surgical lighting, three, no shadow requirements, four, cold light requirements, five, removable disinfection requirements. Operating lamps, including the overall reflex operation lamp and hole series of two kinds of surgical lights, the overall operation of the lamp and reflector light and single lamp; hole surgery lamp is divided into two kinds of letters and a single lamp specifications. Operating lamps, can guarantee the brightness of the operating room lighting, operating room surgeon must be able to accurately distinguish the outline, color and movement, so the need for close to the daylight quality of light intensity, at least 100,000 illumination light intensity, operating lamps can provide Single lamp up to 15 million illumination brightness, and the brightness of the operating lamps can be stepless adjustment, in case of failure in the surgical process, you can automatically switch the spare bulb, time is 0.3 seconds, so the operation lights to provide safe surgical lighting . Surgical lamp through the polygon reflector, to achieve the requirements of non-shadow lighting, the reflective surface of a molding by the industrial stamping, high reflectance 95%, forming a homogenous beam, 80 cm from the lamp under the formation of the light beam to ensure surgery Of light intensity, no shadow, and in the surgeon's shoulder, hand and head block part of the light source, can still remain very uniform.
Surgical lamp in the bright light at the same time, to avoid heat, shadowless lamp through the new filter can be 99.5% of the infrared component filtration to ensure that the light to reach the surgical area is cold light.
Surgical lamp shape design and installation position and high standard sealing handle, can effectively control the number of pathogens, disinfection can be disassembled.
Mounted on the ceiling of the operating lights, ceiling or wall in the remote control box should be set in one or more transformers to the input power supply voltage into the required low voltage of most bulbs. Most surgical lamp have dimming controls, and some can adjust the light field range to reduce the light around the surgical site (reflections and flashes from bed sheets, gauze or equipment can make the eyes feel unwell). Surgery lights to ensure that the color temperature of up to 4000 color temperature above, close to daylight, so that the color perception of the eyes more clearly, and will not make medical staff due to prolonged work and eye fatigue.