Processing speed is an important index of plastic injection mould

The processing speed is very important in plastic injection mould. It is not only related to the processing cycle of the workpiece, but also determines the economic cost of the processing.

At the same surface roughness of the die steel, the maximum processing speed produced by the relative electric pulse at the electrode loss is an important index to measure the electrical pulse processing and the machine tool process performance.

The processing speed is very important in the plastic injection mold processing. Because this is the premise of plastic products out of sample.

We can also supply the high quality die casting molding, auto part mould etc. If you need, welcome to contact us.

What are the benefits of warehouse management using Handheld PDA picking?

1. Turn on voice reminder
The handheld PDA picking comes with a voice picking reminder function. Even if the picking staff is illiterate, it is only necessary to pick up the goods with this voice prompt. The use of handheld PDA to select goods not only improves the accuracy of scanning barcodes for verification and review, but also improves the efficiency of picking, and the application scenarios are also extensive.

2. Information management
Industrial PDA, as the most effective tool for warehouse information management, plays an important role in warehouse management. When an employee picks up a product, if every time an inventory area encounters an information error, it will inevitably reduce work efficiency. When using PDA to pick up the goods, as long as the information about the inventory in the shelves, shifts, inventory, replenishment, etc. is all PDAized, the use of PDA to information management inventory can ensure the inventory management system data and physical quantity retention. Consistent and high accuracy.
3. Develop a picking route
After the PDA picks up, it can implement sub-regional picking and clear and smooth picking routes. Avoid unfamiliar goods location, repeat picking and returning, causing congestion in the warehouse channel. You can master some tips for storing goods. First of all, in the same location, we must use strategies to ensure that the same SKU is put together as much as possible to prevent mixing, so as to avoid the time cost of employees in picking. If the warehouse is not enough, you have to mix it, you can set the strategy to put the SKUs that look different in appearance, so that the picking staff can distinguish.

4. Automatic statistics of picking performance
In the process of manual picking and review, manual errors cannot be completely circumvented, but an excellent picking method has the function of statistical and traceability of quality problems. When any single order is wrong, it can be traced back to picking personnel, reviewing personnel or The team, and the statistics are reported, the manager establishes the reward and punishment system according to the data report provided by the inventory management system. Thus, the employee's picking performance problem is also accurately solved, which not only improves the work efficiency, but also saves the time cost.

Valves

Valves are pipeline accessories used to open and close pipelines, control the flow direction, and regulate and control the parameters (temperature, pressure, and flow) of the transport medium. According to its function, it can be divided into shut-off valve, check valve, regulating valve and so on.
The valve is a control component in the fluid delivery system and has functions such as cut-off, regulation, diversion, reverse flow, pressure regulation, diversion, or pressure relief. Valves used in fluid control systems, ranging from the simplest shut-off valves to various valves used in highly sophisticated automatic control systems, are quite diverse in variety and size.
Valves can be used to control the flow of various types of fluids such as air, water, steam, various corrosive media, slurries, oils, liquid metals, and radioactive media. According to the material, the valve can be divided into cast iron valve, cast steel valve, stainless steel valve, fully welded ball valve, metal seated ball valve, automatic recirculation valve, plastic valve, and non-standard customized valve.
A valve is a device used to control the direction, pressure, and flow of a fluid in a fluid system. It is a device that allows the flow of a medium (liquid, gas, powder) in a piping and equipment, and stops and controls its flow.
The valve is the control component in the pipeline fluid delivery system and is used to change the passage section and the direction of the medium flow. It has functions such as diversion, cut-off, throttling, non-return, diversion, or pressure relief. Valves for fluid control, ranging from the simplest stop valve to various valves used in highly complex automatic control systems, are available in a wide range of sizes and sizes. The valve's nominal diameter ranges from extremely small gauge valves up to 10m in diameter. Industrial pipeline valves. It can be used to control the flow of various types of fluids such as water, steam, oil, gas, mud, various corrosive media, liquid metals, and radioactive fluids. The working pressure of the valve can be from ultra high pressure from 0.0013MPa to 1000MPa, and the working temperature can be C-270°C to a high temperature of 1430°C.
Valve control can use a variety of transmission methods, such as manual, electric, hydraulic, pneumatic, turbine, electromagnetic, electro-hydraulic, electro-hydraulic, gas-liquid, spur, bevel gear drive, etc.; can be in pressure, temperature Or other forms of sensory signals, operate according to predetermined requirements, or simply open or close without relying on sensing signals, the valve relies on a drive or automatic mechanism to make the opening and closing parts move up and down, slip, swing or turn Movement, thereby changing the size of its flow area to achieve its control function.

Basketball

Got basketball?

Getting the right hoop can be a real game changer.
Whether you’re nailing every free throw, driving it hard to the hoop or just goofing around in the driveway, you’ll want to get familiar with the best basketball hoops available today.
We know it can be tough to choose basketball hoop stand. Especially if you’ve never done it before.
We’ll run down some of the best basketball hoops for both kids and adults to help make your search easier.
There’s a wide variety of hoops available, so we’re highlighting some of the more popular brands to help you make a more informed decision.

1.Lifetime 71566 50 Inch Shatter Proof Portable basketball hoop adjustable This is a solid hoop.
The 50 in. shatter proof backboard is made from Makrolon™Polycarbonate – which is just an impressive-sounding way of saying it’s virtually unbreakable.
There’s no concrete installation required and the extra large roller base provides stability without sacrificing portability. You simply fill the base with sand or water.
As far as filling, moving and draining the base, water is the way to go. Plus, the system has been tested to withstand up to 40 mph winds when properly filled with water.
If you’re looking to play more aggressively or in higher winds, then sand is your best choice. It provides more rigidity.
Height is easily adjustable from 7.5 ft to 10 ft with just a squeeze of the handle.
And Lifetime hoops are constructed with durability in mind. They are also constructed with UV-protected graphics to resist discoloration and powder-coated steel to prevent rusting.
Strong and good-looking.

2. Spalding NBA “The Beast” Portable Basketball System – 60″ Glass Backboard
If you’ve been looking for the first NBA quality glass portable backboard system for home use, you just found it.
The Spalding name equals unmatched construction while providing top-level strength, mobility, and adjustability. It won’t be long before you’re playing like a pro.
The system has four strut pole/base mount for superior system rigidity, a heavy-duty steel frame with aluminum trim and the first and only 60″ glass portable available on the market today.
Plus, it comes with an institutional style ScrewJack lift to manage the height adjustment from 7.5 ft. to 10 ft.
Rated as one of the best basketball hoops, it’s also one of the biggest and most stable hoops that still allows for a degree of portability.

Badges

The types of badges are: National Emblem, Party Emblem, Mission Emblem, Team Emblem, Police Badges, Military Emblem, Army Emblem, Navy Emblem, Air Force Emblem, Urban Control Emblem, Forestry Emblem, Quarantine Emblem, Public Anhui, Women's Union Emblem, Hospital Emblem, and Justice Emblem, Tax emblem, criminal badge, court badge, procuratorate badge, road badge, political association badge, business emblem, people's mediation emblem, sterling silver medal, medal, new business emblem, new public Anhui and so on.
Modern badge
Modern badge
The badge making process legend illustrates the most used badge processes, paint, imitation enamel, stamping, and other Badge Pins processes: bite (etched), screen printing, offset printing, 3D effects, and more.
Paint large picture effect, the concave part of the badge can be in various badge colors (our color number is Pantone color), where Custom Badges can be raised in a variety of plating, nickel plating and other plating effects (metal color).
Paint features: Bright colors, clear lines, bright metal texture, you can use copper or iron as raw materials, which iron paint badge is cheap, if your budget is less, choose this is the most appropriate!
Paint badge
The surface can be coated with a transparent protective resin (Boli). This process is commonly referred to as "epoxy" (because the light is refracted, the surface of the badge will be bright after the glue is dripping), but the resin paint badge is added. Loss of bumpy feeling, but it can play a role in protecting the LOGO.
The surface of the imitation badge is flat, (as opposed to the paint, in fact, the metal lines on the surface of the badge are felt with a finger or slightly raised) The lines on the surface of the badge can be plated with gold, plated with silver, and other metal colors. Lines are filled with various iridium pigments. Imitation large picture effect.
2. Imitation badges
The craftsmanship is similar to the enamel badge (Clemaline insignia), which differs from the real enamel in that the enamel pigment used in the badge is different (one is a real enamel pigment, one is a synthetic vat pigment, and the enamel enamel pigment)
Imitation enamel badges, exquisite craftsmanship, enamel color surface smooth, particularly delicate, giving a very high-end luxury feeling. It is the first choice for badge making process. If you do a beautiful and upscale badge first, please choose a badge.
Korean Kart Racing Badge
Korean Kart Racing Badge
3. Stamping badges
Stamping badges generally use copper (red copper, copper, etc.), zinc alloy, aluminum, iron, etc. This can also be called a metal badge. Among them, because copper is the softest and most suitable for making a badge, the line of the copper pressure badge is the clearest, followed by the zinc alloy badge, and the price of the corresponding copper pressure badge is also the highest. The surface of stamping badges can be used for various plating effects, including various plating effects such as gold plating, nickel plating, copper plating, bronze plating, and ancient silver plating. The recessed part of the stamping badge can also be treated as a frosted effect.
4. Printing badge
Divided into screen printing, lithography. It is also commonly referred to as an epoxy badge because the last step of the badge is to add a transparent protective resin (Boli) to the surface of the badge. The materials used are mainly stainless steel and bronze. The picture on the right shows the effect of bronze on the back. The copper or stainless steel surface of the printed badge is not plated and is treated with natural colors or wire drawing.
Screen printing badges are mainly aimed at simple graphics and less color.
Lithography: For complex patterns, more colors, especially gradient