Will the thickness of aluminum alloy doors and windows affect performance?

Since the development of the construction industry, as people's needs have changed, many aspects of their concepts have changed. For example, the doors and windows have now been changed to aluminum alloy doors and windows made of aluminum alloy. Now consumers' requirements for doors and windows are not only beautiful, but also important. Regarding safety, it is widely believed that the thicker the doors and windows, the better, so is the thicker the better? Let's analyze it for everyone

Is the thicker the better?

First of all, the thickness of aluminum alloy doors and windows is not as thick as possible. The choice of thickness is based on the use of the environment and other factors according to the principle of mechanics. If the material used is small, there will be hidden dangers. If it is used too much, it will cause unnecessary waste and the cost of consumers will also To improve, in general, the thickness of doors and windows can be divided into 1.4, 1.6, 1.8, and more than 2.0, not the thicker the material, the better, but to choose the appropriate.

Generally speaking, the force thickness of the window should not be 1.4 mm, the main force part of the door should not be less than 2 mm, the thickness of the force part of the window should not be less than 1.4 mm, and the main force part of the door should not be less than 2 mm.

Will the thickness of aluminum alloy doors and windows affect performance?

Since the development of the construction industry, as people's needs have changed, many aspects of their concepts have changed. For example, the doors and windows have now been changed to aluminum alloy doors and windows made of aluminum alloy. Now consumers' requirements for doors and windows are not only beautiful, but also important. Regarding safety, it is widely believed that the thicker the doors and windows, the better, so is the thicker the better? Let's analyze it for everyone

Is the thicker the better?

First of all, the thickness of aluminum alloy doors and windows is not as thick as possible. The choice of thickness is based on the use of the environment and other factors according to the principle of mechanics. If the material used is small, there will be hidden dangers. If it is used too much, it will cause unnecessary waste and the cost of consumers will also To improve, in general, the thickness of doors and windows can be divided into 1.4, 1.6, 1.8, and more than 2.0, not the thicker the material, the better, but to choose the appropriate.

Generally speaking, the force thickness of the window should not be 1.4 mm, the main force part of the door should not be less than 2 mm, the thickness of the force part of the window should not be less than 1.4 mm, and the main force part of the door should not be less than 2 mm.

What are the chassis of ergonomic chair for office?

Now when many people choose office chairs, they generally only pay attention to the appearance, function and price of ergonomic chair for office, and those who know about office chairs know that the core technology of office chairs lies in the design of the chassis. A good chassis allows Ang users to better operate and adjust the office chair, which undoubtedly improves the comfort and safety of the selected office chair.

At present, the mainstream ergonomic chair for office chassis on the market can generally be divided into three types: one is the traditional three-function chassis, which is more common and has a larger market share. The chassis is generally equipped with two control devices, that is, the lifting control lever and the knob, which can basically be used for three functions of the office chair, that is, tilt and lock, tilt elastic lifting and weight adjustment. It is easy to operate. The right lever is the condition to control the reclining of the chair back. Pushing inward locks the back of the chair. Pulling out is to open the back of the chair and tilt it. Back pressure can be used to adjust the recline of the seat back. Another method is to adjust the lifting height of the office chair by turning the control lever clockwise.

Then there is the engineering four-function chassis. Compared with the traditional three-function chassis, it has two obvious characteristics. First, the chassis adopts the wire control technology, which is to avoid the control device that directly extends from the internal structure like the traditional chassis, which can make the control position more concentrated and beautiful. The second is to increase the front and rear adjustment and depth adjustment of the seat, so that the ergonomic chair for office can adapt to customers of different heights. This design gives users a more intuitive feeling, which can make them more comfortable to sit in. The seat depth adjustment is one of the main differences between ordinary office chairs and engineering office chairs.

Buying skills and maintenance methods of leather office chairs

Boss chair selection skills, boss chairs are generally executive chairs and leather office chairs, and commonly used leather and mesh fabrics, so when buying, according to its characteristics to judge good or bad.

Buying boss chairs
The boss chair is divided into executive chair and modern chair. It has the advantages of strong air permeability, large tensile force, good resilience, and not easy to deform. It is generally suitable for the office of the president. The boss chair also has a modern chair with mesh surface, which is also ergonomic. Unlike the executive chair, it is simple in style and cheaper than the executive chair.

When choosing a boss chair, you should pay attention to the following points:
Softness
When buying a boss chair, you must first look at the softness of the chair, which can be moderately soft and hard. A chair that is too soft, although comfortable, is not conducive to long-term office work. At the time of purchase, the chair can be pressed down by hand to test it. A chair with elasticity is preferred.

Single-Seat-Frost-Chair
HC011 Single Seat Frost Chair
Chair height
The height of the boss chair can be adjusted best. Adjust the suitable height according to the height of each person. The height is suitable to fit. The legs are more comfortable and not easy to get tired.

Stability
The stability of the boss chair is directly linked to the details of the chair. Especially some modern chairs are mainly supported by the feet of the chair. It is important to deal with the problem of the chair after the festival. The structure of the high-quality chair is meticulous. When buying, you can try the following chairs in person and shake your body slightly to experience the stability of the chairs.

Boss chair maintenance method
1. Maintain with professional cleaners and dermal care fluid. Regular cleaning and maintenance, the chair has a longer service life. General boss chair cleaning is divided into two types: dry foam cleaning and deep cleaning. The specific cleaning should be based on different dirt and materials on the boss chair surface.

2. Deep cleaning methods. First remove the dust on the surface of the boss chair, then scrub the more stubborn dirt on the surface of the boss chair with a professional board brush and concentrated cleaning agent, then use a professional machine to perform a comprehensive second brush, and finally use a water suction machine to fully absorb the moisture.

Tail Butt - Piglet Gas Tail Docker

For various reasons, pigs may bite each other's tails. This can lead to infections, spinal abscesses, severe pain, la lines and car body condemnation.If other management methods are not working, your veterinarian may recommend docking the tail to prevent tail biting. If tail docking is recommended, its necessity must be reviewed regularly (quarterly) as part of the department's veterinary health plan, and a concerted effort must be made to provide actionable material in all pens.

Tail docking equipment
• Ensure that the operator is familiar with the manufacturer's instructions.
• Check if the blade is clean and heated properly.
• Check if the battery is charged or has a sufficient gas tank.
• Faders must be dedicated to this process and not for cutting teeth, make sure they are sharp and clean.
• Pack equipment and materials in a belt bag or transport container before entering the farrowing area to ensure that the operator is separated from the sow.

Work outline
• Don't try to cut like scissors, but let the heat burn, and fix the equipment container in a safe and convenient place in the first delivery room or shed.
• Collect all piglets into a storage container, make sure the cautery blade is fully heated, then pick up the piglets on the hind legs above the hock or around the hips, keeping the tail stable during operation.
• Gently squeeze the piglet gas tail docker to remove the proper length of the tail. Clippers should be disinfected in time when used on different piglets.
• Regularly inspect and remove debris from the cautery blades and rails using a designated wire brush.
• Make sure all tails are evenly docked in one unit, so it's useful to have a mark on the fader to indicate the standard docking length of the device.
• Record the incidence of tail bites in a timely manner so that there is the latest evidence that the docking needs to continue. If tail biting continues in docked pigtails, other suggestions and measures should be sought to help resolve the issue.