Autel, OBDSTAR or SSM4 for 2023 Subaru Forester All Keys Lost

As titled, which tool to program 2022/2023 models like forester and outback G & H type keys when all keys lost?

Here is the clue.



Autel IM608:

didn't work as it was unable to read eeprom data



OBDSTAR X300 DP Plus:

tried obdstar x300 which didn't even have the correct car on there.



Subaru SSM4 clone:

with ssm4 it requires server authentication and when i use a bypass patch to activate ssm4 that process doesn't work.



Subaru SSM4 with subscription:

Yes, Need a legit SSM4 and current authentication key. (The authentication key that changes every 6 months)

Free Download ODIS Service V23 Software

The latest ODIS (Offboard Diagnostic Information System Service) Service 23 software can be downloaded here for free.



Free download ODIS V23 (Installation files only)
Just for sharing purpose. License & keygen are not included. Need to find keygen by yourself (or buy keygen from text link above).

Information software:

• Release name: Offboard Diagnostic Information System Service v23
• Type of Software: Diagnostic
• Capacity: about 18.1 GB
• Version: ODIS-S 230001.105.130
• Vehicle Connection:
+ Version of ECF: 57.6.2
+ Version of VW-MCD: 20.0.0
+ Version of VW D-PDU API: 3.0.0
• PostSetup: 0105_9-20230612
• License: Included License Standalone and License for all brand
• Brand: VAG (Audi, Bentley, Bugati, FAW-Volkswagen, Lamborghini, MAN, Seatm Volkswagen, Skoda)
• Region: All regions
• Language: English


Hardware Support:
• VAS6154 genuine devices
• Multi J2534 Passthru (SVCI 6154, Openport 2.0, VNCI 6154A, VXDIAG VCX SE 6154, Autel MaxiFlash JVCI, JVCI+, MaxiFlash Elite, MaxiVCI V200 etc)


Computer Requirements:
• Windows 10 (ODIS Service 23.0.1 works only on Windows 10 or more)
• Installed libraries (DLL) for Microsoft Visual Studio 2010: vcredist_x86.exe
• Installed Visual C++ Redistributable x86 for Microsoft Visual Studio 2010: vcredist_x86.exe
Internet Explorer 11.0
• Adobe Acrobat Reader Version 11 or Adobe Acrobat Reader DC
• Font „Arial Unicode MS Regular
• CPU minimum 2GHz recommended
• RAM >= 4 GB
• Free hard disk storage > 40 GB, standard file system NTFS
• The software uses standard windows installation paths

Note: End of support Windows 7: Please note that support for Windows 7 ended on 14.01.2020. This version does not support Windows 7 installation

OBDSTAR iScan Ducati Review on 2009 Hypermotard S

Just purchased an OBDstar iScan Ducati scan tool off obdii365. My intent was to use it to clear the service code on a 2009 Hypermotard S. But I can't get it to work properly. I know there are dozens of pages on the OBDStar scanner tool, and yes, I've looked through them. All I get is the "Communications Error" page. It clear it's not handshaking with the ECU because I always have to enter the VIN manually. Yes, I set up the online account. Yes, I did the updates, Yes, I downloaded (or "upgraded" as they called it) the software. I just double-checked and the device says there are no other updates. Yes the ignition key is on. I'm using the cables supplied with the device. The bike has the Ducati "Race" or performance ECU installed.



Solution:

Make sure you use all the supplied cables. Connect one of the two cables straight to the battery for a 12 volt source to get your OBDstar Ducati scanner to work on
There is a 12V clamp cable connected to the OBDStar plug in port which end goes to the diagnostic port of the bike.
The device must be connected to the internet. You must register by OBDStar.



Feedback:

Updated. I made a mistake.

I was trying to use the 4 pin connector under the seat, when I should have been using the “old style” 3 pin connector (and battery power) under the right panel next to the ECU. Once I did that, cleared the service indicator in about 5 min.

Autel Jeep Renegade 2020 Unlock failed. The tool did not allow

Here comes a similar problem:

One of our customers failed to reset oil on a Jeep Renegade 2020 with Autel MaxiCOM MK908 II diagnostic scanner.

Error message “Unlock failed. The tool did not allow.”

Solution:

For 2018+ FCA Chrysler Jeep Dodge you need to unlock or bypass gateway to access functions.



2 Ways:

1. use Chrysler 12+8 gateway adapter, Start Connector to unlock gateway
http://blog.obdii365.com/2021/05/08/chrysler-128-bypass-cable-star-connector-or-autoauth/


2. purchase AutoAuth license
http://blog.obdii365.com/2022/10/27/activate-and-use-fca-autoauth-for-autel-scanners/


This can be applied to all Autel MaxiSys and MaxiCOM scanners.