How to maintain office furniture office chair?

How to maintain the office chair?

First of all, when carrying the office chair on weekdays, you should lift it gently, and pay special attention to avoid collision. After sitting for a long time in the chair, when you get up, first tap the sedentary part and the edge area of the seat to restore the original condition as soon as possible, and reduce some depressions caused by the sitting power set.

When placing the Ergonomic Boardroom Office Visitor Chair, be careful to keep away from the heat sink and avoid direct sunlight. Do not expose it to strong light. The sun will damage the leather material. Do not rub vigorously when cleaning the office chair, so as not to damage the skin.

For the inadvertently soiled and contaminated Luxury Reinforcing Fabric Industrial Bar Chair, the appropriate concentration of soapy water or washing powder can be used as appropriate, and the water content is generally 40% to 50%. Wipe with water after wiping, and finally wipe it with a clean rag.

The office chair is usually mailed when sitting. When using it, try to make the center of gravity in the middle of the air pressure bar. This not only ensures uniform force, but also ensures that the air pressure lever is light and flexible. In addition to the above, the office chair of the office chair should be used to check whether the screws on the chair are loose. If it is loose, it should be tightened in time. Also check whether the spring and the knob are loose. The spring needs to be based on the user's own weight. To adjust the elasticity.

Pay attention to the following points when cleaning. First of all, you must first understand the material of the office chair. Generally, the office chair legs are mainly made of solid wood and wrought iron. The stool surface is made of leather art or fabric. It is necessary to clearly understand the different materials. When the chair is being cleaned, the cleaning method is also different.
Leather office chair, when using detergent, it is best to try to clean the following in an inconspicuous position to see if there is fading. If there is fading, the concentration of detergent is too high. At this time, it needs to be diluted with water. So as not to damage the cortex.
For solid wood office chair feet, you can use a dry cloth to wipe directly. After wiping with a cloth with some detergent, put it in a dry place to dry. As for the fabric stool, the best cleaning method is to spray the cleaner, just wipe it gently. If it is particularly dirty, use warm water combined with detergent to make it clear. Remember to not rub it with a brush, or the fabric will easily become old.