Introduction and use of LED Par description

The lighting fixture of LED structure simple and elegant designed, which used aluminum profiles made of one-piece greatly reduce the weight. Two sets of installation provide customer convenience, improve light utilization, very practical, truly Tri-Proof.
There are waterproof and dustproof drop resistance against pressure and even moisture corrosion, using a very wide range. Get all customers' recognition and acceptance.
Tri-proof led light means: waterproof, dustproof, anti-corrosion these three. Oxidation using special anti-corrosion materials and silicone seals to achieve the lamp protection requirements. This light circuit control board corrosion, water, oxidation treatment, for electrical boxes sealed cooling capacity is weak features, intelligent temperature three anti-lightstri-proof led light for operation of the circuit, reducing the power converter operating temperatures, strong electrical isolation protection on the road, double insulated connectors ensure the safe and reliable line. According to the actual working environment of the three anti-lamp, lamp protection box for surface nano-spray corrosion proof treatment to prevent dust and moisture from entering.
instructions of waterproof led par light
1, LED Par can be installed in any position, and the distance between the light and the person or others should be more than one meter, please make sure to lock the light should be made to foot
Enough safety precautions.
2.Make certain voltage and frequency to adapt to the power supply and in the right light, and then open it.
Maintenance Make sure the power is off, if you want to open or maintain a dry light.Keep light, the light output will remain, if you regularly clean
The light can also be extended using the specialized glass cleaning fluid cleaning it.Don 'T use alcohol or chemical liquids to clean it, and please clean the inside of the vacuum cleaner light at least once a year.
WARNING Be careful installation.
Do not use this product near water or other liquids.
Do not install in high temperature environment, the distance between the lamp and other objects should be at least 0.5 meters.
Do not look directly at the light, otherwise it will damage your eyes.
Before opening the maintenance lamp, must confirm that the power has been cut off.
The light emitting diode damaged, it must be professional and technical personnel maintenance.