Regarding the rain led waterproof power supply, these little tips need to be kept in mind!

Switching power supply factorys are now used in a wider range of applications, especially in high-tech applications, which promote the development of high-tech, and are very helpful in saving energy, saving resources, and protecting the environment.
The rainproof switching power supply comprises: a box body, a switching slim LED power supply, a switching power supply adapter board, and the box body thereof is composed of a bottom shell and a surface cover. The bottom case is a U-shaped end face formed by the bottom plate and the two side plates, and the inner side of the bottom plate is provided with at least one screw fastening groove for fixing the switching power supply adapter plate; on the two outer sides of the side plate A cover chute slidingly mating with the bottom case chute is further provided, and an inner circular groove capable of fixing the upper end cover and the lower end cover is provided in a portion near the four corners of the bottom case.
First, the positive pole of the V+ switch, the negative pole of the V-connector, and then the L and N are connected to the position of the AC220V terminal, which is very simple and convenient.
Part of the purchased Switch Power Supply always burns out. First check if the load is faulty. Because the switching power supply is generally outdoors, the parts that are blown by the wind are prone to problems. Then we need to see if there is a bad contact in the load and ensure that there is no sparking. If the above two problems do not occur, then see if the aging is rusting. Replace parts of this type if there is a leakage.
When purchasing the rain-proof switching power supply, we must choose a good quality and guaranteed power supply. When selecting the power supply board, pay more attention to it to avoid the situation of sub-filling. The inferior products on the market use half-wave lead plates. This will make the LED Waterproof power supply have a shorter service life, and the regular service life will be longer. At the same time, many inferior products are made of second-hand components. Once they are used for a long time, they will explode. It is a very dangerous situation, so we must choose products with guaranteed quality.