How to clean and maintain attractive bicycle helmets?

For cyclists, you must wear attractive bicycle helmets when riding out. However, after experiencing wind, rain, sun, rain, and pasting number stickers, it is inevitable that the helmet will gradually become old.However, it is your fault that the helmet is dirty and smelly, and even the EPS edge of the inner shell is potty, which is caused by improper maintenance.

First of all, maintaining the luster of the helmet shell is a contradictory problem, because the luster of the attractive bicycle helmets are due to the ultraviolet rays of the sun and the dust from the surroundings that are attached to our helmets during daily riding, making it lose its former luster. . Although we can't avoid it, at least we have to find a way to make the gloss last longer.

Remember that bicycle helmets should not be exposed to the sun and frequent rain, or they will be glued soon. There is also a cotton cloth moistened with alcohol or white electric oil to wipe the surface of the helmet every time you come back to remove the stains and dust on the surface of the helmet (never use a harder cloth to wipe the helmet shell). You can also put some wax on the helmet to make it more shiny.

For the inner shell EPS, there is no need for maintenance, but as time goes by, the place where there is no outer shell on the edge will be pitted and not as smooth as before. For those places where the depressions are not deep, we can use the screwdriver's shank part to slightly press the depressed areas around the depressions.

Remember to use a screwdriver to select a round rod and press it back and forth. For those places where the depression is deeper, we use the mosquito incense that is used daily to smoke mosquitoes. We first light it, and then use the lighted part to bake it. The EPS will foam as soon as it becomes hot. Remove the mosquito coil when you see the sunken place and the same place.

The lining needs daily cleaning. When removing the inner lining, do not pull it suddenly with great force, it is very easy to tear off the Velcro and the inner lining together. The disassembled inner liner cannot be washed in a washing machine, nor can it be brushed with a brush. This will easily deform the inner liner and lose its elasticity. Just soak it in water with detergent or detergent for a few minutes, rub it a few times with your hands, rinse it with water, and dry it.

Helmets are witnesses that accompany us through every journey worth remembering. As a must-have, the most important attractive bicycle helmets, it is very stressful. So, for your purse and its light, please treat it normally.