Steel shooting targets: 8 methods for hanging steel targets(2)

Fire Hose
To have a creative suspension solution is to find something that is super durable and can withstand the impact of shooting. The old fire-resistant material was quite strong because it could withstand about one trillion pounds of water pressure per square inch.

Not only that, the fire hose has anti-twist performance. This means that when you hit the target, the target does not spin wildly. If you use two fire hoses you will have a very stable goal. It will still sway on impact, but will soon return to a stationary position, like a pendulum that is a bit tired. In addition, the heavy canvas material responds well to bullets passing through it.

Ultra high molecular weight polymer
UHMWPE is an ultra-durable plastic. This is something that runs along the bottom of the snowplow blade. Think about it, a truck shrinks at 30 miles per hour on the street, and a plastic strip absorbs and recovers itself from all bumps on the road. That's why people use it for some steel targets for shooting.Kiel is a big advantage. It's stiff enough to allow the target to swing like a pendulum on impact, but durable enough to handle several bullet attacks.

Inner tube
This is something that everyone can easily get-old (or new) bicycle inner tubes. If you don't have a worn out bike, just go to your local repair shop and buy one or two bike tubes. Rubber is easily cut with a knife or scissors and made into a great steel target hanging material. The weight supporting a heavy plate is strong enough that bullets will pass through it. When you destroy it, cut another length from the tube.

Reinforced steel target frame
Rebar is cheap and easy to find. It's strong and resilient, and if it's broken or broken, it's not expensive or difficult to replace. Although it is not the lightest material in the world, these tiny rebars are easy to transport on any vehicle.

Shepherd's hook
Here are ready-to-use hangers and stands from Champion Range and Target. It's made of a steel bar, hooked at the top, so you can hang most steel gongs or targets with holes like the large steel targets in the center of the Champion AR500. The base has a sharp angle made from the middle pillar to a 90-degree angle relative to the reinforced material. This gives you a beautiful foot platform where you can step on the unit to push to the ground.

How to choose the right white toilet？

When choosing a white toilet, how should we choose the shape of the face in various ways and the differences in drainage, pit distance, flushing and other methods? The following describes the structure, advantages and disadvantages of various types of toilets, for your reference only.

Toilets can be divided into one-piece toilets / separate toilets / tankless toilets
The so-called one-piece toilet is a one-piece toilet, and the toilet base is integrally formed with the water tank. Because the mold used in production is relatively large, often accompanied by shrinkage and deformation, its yield is relatively low, so the cost is relatively high.

Split toilet, as the name suggests, the toilet base is separate from the water tank. When using the split toilet, the water tank and the base need to be fixed together with screws. The production process is relatively easy, but requires a small shrinkage rate, and the data between each screw hole must be precise, otherwise it is easy to misplace during installation. A good split toilet, especially a toilet with a vertical backing against the wall, also has higher requirements for the porcelain mud used for the toilet.

The toilet without a water tank, also called a wall-mounted toilet or a floor-mounted toilet, is characterized by no water tank. The toilet needs to be used with a hidden water tank. The advantage is that it saves space and looks simple. The inconvenience is to install such toilets, and the water tank needs to be installed in the wall in advance.

According to the drainage direction of the toilet sewage outlet, it can be divided into a wall toilet and a floor toilet
The wall toilet means that the direction of the sewage outlet is toward the wall. The toilet wall is generally flushed into the toilet, and the siphon toilet cannot be made into a wall.

Floor drain toilet means that the direction of the sewage outlet is toward the ground. Floor drain toilets are widely used, and the pitch of floor drains is not fixed, ranging from 90 to 400 floor drains. Ground drain pit distance means the distance from the center point of the sewage outlet to the edge of the wall.

According to the toilet flushing method, it can be divided into straight flush toilet and siphon toilet.
1. The straight flush toilet has a large sewage drainage pipe with an inner diameter of 8CM and an outer diameter of 10CM. Usually, the flushing socket of the toilet is designed to be steeper, which is convenient for increased hydraulic flushing, and uses the gravity acceleration of water to discharge sewage. The advantage is that it is not easy to plug, and the disadvantage is that the flushing noise is large.

2. Siphonic toilet The sewage pipe has an inverted "S" pipe. Using the siphon principle, the water level in the flushing socket rises, and the highest point of the liquid in the pipe moves to the lower nozzle under the action of gravity. A negative pressure is generated inside the S-shaped pipe, and the dirt is sucked through the S-shaped pipe and discharged down into the sewage pipe. The thinner the S tube, the better the siphon effect, so the disadvantage of the siphon toilet is that it is easy to block, and the advantage is that the flushing noise is small.

What Do The fFour-piece Quilt Comforter Sets Refer To?

The four-piece quilt comforter sets refers to the essentials for bed use when sleeping. It mainly includes two pillow cases, a quilt cover and a bed sheet. Most of the materials are pure cotton, and there are silk cotton and fiber. The four-piece set on the bed occupies an important position in home life. According to the differences of the four seasons, there are many differences in the types of fabrics of the four-piece set.

The fabric structure of four-piece sheets is generally divided into plain weave, twill weave, satin weave, and jacquard. Low-grade plain weave products have many intertwined points, firm texture, flat surface, the same appearance effect on the front and back, and good abrasion resistance and breathability. Twill fabric is a more common mid-range product, with longer floating lines and a soft feel. Tissue fabrics are denser and the product is thicker. Satin fabrics are mostly used in middle-to-high-grade bedding, with soft texture, smooth and shiny fabric.

What fabrics do the four-piece sheets have?
• Cotton fabric
Pure cotton fabric is considered as a comfortable fabric, and it is the most common four-piece fabric in the family.
Advantages: Absorbs water, sweat and sticks to the skin, and does not have any irritating properties to human skin. Cotton fabrics dominate the bedding. In the cold winter, cotton fabrics have better warmth, giving a soft and comfortable feel as a whole, and the price of cotton bedding is also moderate.
Disadvantages: The biggest disadvantage of cotton fabrics is that they will shrink after frequent cleaning.

• Linen fabric
Advantages: Linen sheets make it easier to fall asleep than cotton sheets, and they sleep soundly and deeply. Examination of the skin showed that the type of linen bedding had no irritation to the skin, reduced skin temperature and muscle tension, and the linen fabric also had the effect of inhibiting bacterial growth.
Disadvantages: The bedding of linen fabric feels rough, and it is generally used as a bed cover during the day, or as a nursing bed sheet on a mattress.

• Polyester fabric
Polyester fabric is a blended fiber, which is a blend of some natural fibers and chemical fibers. Both the comfort of natural fibers and the durability of chemical fibers.
Advantages: Low cost, good color fastness, bright colors, good shape retention, and more durable.
Disadvantages: Easy to pilling, easy to electrostatic, poor affinity.

• Brushed Fabric
The brushed fabric is a high-grade combed cotton. During the post-processing, the fabric is brushed to make the surface of the fabric have a certain velvet feel and improve the fabric feel.
Advantages: Sanding is also called sanding, which can make warp and weft yarns produce hairs at the same time, and the hairs are short and dense, the suede is flat, the hand feels full and soft, rich in suede, and the luster is soft without aurora.
Disadvantages: Because the brushed cotton products are made of cotton fibers and lack elasticity, cotton clothing will be easily deformed, and it is easy to stick to wool and difficult to remove completely. Not only that, the brushed fabric is also particularly afraid of acid. When the concentrated sulfuric acid contaminates the cotton, the cotton will be burned into holes.

• Bamboo Fiber Fabric
Bamboo fiber fabric belongs to a new type of fabric. It is made from natural moso bamboo as raw material and digested by hydrolysis.
Advantages: Because the cross section of the bamboo fiber is covered with oval gaps, it has good air permeability, and it is cool and comfortable for people to sleep on it. Bamboo fiber is a natural fiber that can produce negative ions and far infrared rays, which can promote blood circulation and metabolism.
Disadvantages: During the weaving process, due to the characteristics of easy absorption of bamboo fiber, large wet elongation and large plastic deformation, it is very easy to be brittle. 100% bamboo fiber in manufacturing has not solved the shrinkage problem well.

• Silk Fabric
Advantages: The most high-end fabric is silk fabric. Silk fabric has gorgeous appearance, richness, natural soft light and glittering effect, feels comfortable, high strength, better elasticity and moisture absorption than cotton, etc.
Disadvantages: Easy to soil, and less heat resistant to strong sunlight than cotton.

Still have to learn to maintain a variety of bedding in order to make them last longer.

What Do The fFour-piece Quilt Comforter Sets Refer To?

The four-piece quilt comforter sets refers to the essentials for bed use when sleeping. It mainly includes two pillow cases, a quilt cover and a bed sheet. Most of the materials are pure cotton, and there are silk cotton and fiber. The four-piece set on the bed occupies an important position in home life. According to the differences of the four seasons, there are many differences in the types of fabrics of the four-piece set.

The fabric structure of four-piece sheets is generally divided into plain weave, twill weave, satin weave, and jacquard. Low-grade plain weave products have many intertwined points, firm texture, flat surface, the same appearance effect on the front and back, and good abrasion resistance and breathability. Twill fabric is a more common mid-range product, with longer floating lines and a soft feel. Tissue fabrics are denser and the product is thicker. Satin fabrics are mostly used in middle-to-high-grade bedding, with soft texture, smooth and shiny fabric.

What fabrics do the four-piece sheets have?
• Cotton fabric
Pure cotton fabric is considered as a comfortable fabric, and it is the most common four-piece fabric in the family.
Advantages: Absorbs water, sweat and sticks to the skin, and does not have any irritating properties to human skin. Cotton fabrics dominate the bedding. In the cold winter, cotton fabrics have better warmth, giving a soft and comfortable feel as a whole, and the price of cotton bedding is also moderate.
Disadvantages: The biggest disadvantage of cotton fabrics is that they will shrink after frequent cleaning.

• Linen fabric
Advantages: Linen sheets make it easier to fall asleep than cotton sheets, and they sleep soundly and deeply. Examination of the skin showed that the type of linen bedding had no irritation to the skin, reduced skin temperature and muscle tension, and the linen fabric also had the effect of inhibiting bacterial growth.
Disadvantages: The bedding of linen fabric feels rough, and it is generally used as a bed cover during the day, or as a nursing bed sheet on a mattress.

• Polyester fabric
Polyester fabric is a blended fiber, which is a blend of some natural fibers and chemical fibers. Both the comfort of natural fibers and the durability of chemical fibers.
Advantages: Low cost, good color fastness, bright colors, good shape retention, and more durable.
Disadvantages: Easy to pilling, easy to electrostatic, poor affinity.

• Brushed Fabric
The brushed fabric is a high-grade combed cotton. During the post-processing, the fabric is brushed to make the surface of the fabric have a certain velvet feel and improve the fabric feel.
Advantages: Sanding is also called sanding, which can make warp and weft yarns produce hairs at the same time, and the hairs are short and dense, the suede is flat, the hand feels full and soft, rich in suede, and the luster is soft without aurora.
Disadvantages: Because the brushed cotton products are made of cotton fibers and lack elasticity, cotton clothing will be easily deformed, and it is easy to stick to wool and difficult to remove completely. Not only that, the brushed fabric is also particularly afraid of acid. When the concentrated sulfuric acid contaminates the cotton, the cotton will be burned into holes.

• Bamboo Fiber Fabric
Bamboo fiber fabric belongs to a new type of fabric. It is made from natural moso bamboo as raw material and digested by hydrolysis.
Advantages: Because the cross section of the bamboo fiber is covered with oval gaps, it has good air permeability, and it is cool and comfortable for people to sleep on it. Bamboo fiber is a natural fiber that can produce negative ions and far infrared rays, which can promote blood circulation and metabolism.
Disadvantages: During the weaving process, due to the characteristics of easy absorption of bamboo fiber, large wet elongation and large plastic deformation, it is very easy to be brittle. 100% bamboo fiber in manufacturing has not solved the shrinkage problem well.

• Silk Fabric
Advantages: The most high-end fabric is silk fabric. Silk fabric has gorgeous appearance, richness, natural soft light and glittering effect, feels comfortable, high strength, better elasticity and moisture absorption than cotton, etc.
Disadvantages: Easy to soil, and less heat resistant to strong sunlight than cotton.

Still have to learn to maintain a variety of bedding in order to make them last longer.