Oil air separator separator/oil trap for Mercedes Benz 6110160234

Description
Compressed air oil separator, is actually a compressed air with gas-liquid separator, it is not oil and water separation, is used to separate the condensed air in the condensation of water and oil impurities, so that the initial purification of compressed air. Separated oil and water from the sewage outfall together. The general use of pressure is not restricted, the use of temperature should be at room temperature. QF gas-liquid separator works: When the compressed air into the water separator after the flow direction and the rapid changes in speed, and then rely on centrifugal action, the density of oil droplets and water droplets larger than the compressed air separation. As shown in the figure for the common impact and ring rotary oil-water separator. Compressed air from the inlet into the separator shell, the air first by the barrier blocking the impact of folding back down, then rise back up, resulting in circular rotation. So that the water droplets and oil droplets in the centrifugal force and inertial force, separated from the air precipitation and settlement in the bottom of the shell, regularly open the bottom of the valve to drain oil droplets. The purified air is sent from the outlet to the tank.

Part Name: Oil separator,Crankcase breather oil trap
OEM: 6110160234

Application
BENZ: VITO W638

Wholesale welded plate heat exchanger from Hofmann

Smooth surface of welded plate heat exchanger is not easy to scale. Its unique design of the corrugated fluid at low flow rate can also produce turbulence, high heat transfer efficiency, the entire beam using the body material by the TIG welding. Do not use any non-metallic sealing material, which has a high temperature, pressure performance. Can be applied to the working temperature of 300 ℃, pressure 3.0Mpa extreme working conditions.

The Characteristics of All-welded Plate Heat Exchanger
The heat plate of all-welded plate heat exchanger is made of special stainless steel pressed with special mold. The smooth surface is not easy to scale, and its unique corrugated design allows fluid to generate turbulence under low velocity, so it can have high efficient heat transfer. In all our products, we do not use any nonmetal sealing materials, which ensure that our products have higher heat resistance and pressure resistance properties.
Our Main Application
a. Crude oil, natural gas purification treatment and chemical products: TEG interchangers, crude coolers, overhead condensers
b. Chemical industry: heaters, coolers, exchangers, condensers
c. Pharmaceutical industry: overhead condensers, heaters, coolers
d. Jet control system
e. HVAC，district heating, thermal power plant
f. Food science and technology

E-Waste Management Market – 2020 Industry Analysis

The global e-waste management market is anticipated to grow during the forecast period owing to the increasing amount of e-waste generated every year. The e-waste generated should be recycled or disposed properly to protect the environment and human beings from the harmful effects of toxic elements present in it. According to Environmental Protection Agency (EPA), the amount of e-waste generated is estimated to increase between 5 to 10% annually. In 2011, the amount of e-waste recovered is approximately 5% of the total e-waste generated. Rest of the e-waste that is dumped without proper methods possesses threat to the environment as well as the human beings.
E-waste consists of all types of electrical and electronic equipment that are a part of the waste stream. TVs, computers, fridges, washing machines, mobile phones and others items with circulatory or electrical components with battery or power supply are also a part of e-waste. The system of establishing a value chain to ensure the collection, recycling and proper disposing of e-waste is called e-waste management system. According to 3Rs (Reduce, Reuse and Recycle) of waste management, the waste quantity should be reduced through smart procurement and good maintenance. Equipment that is functional should be reused by selling or donating. The equipment that cannot be repaired should be recycled.
E-waste recycling equipment is different from municipal waste as it contains various hazardous metals. It also contains various precious and valuable metals. Some of the e-waste is very harmful to human being and the environment, if not disposed properly. For example, polyvinyl chloride cables (PVC) which are used for connectors and cables are very harmful, as they release dioxins on burning or when land filled. These dioxins have negative effects on human reproductive and immune systems. Some of the other toxic wastes presents in e-waste are mercury, beryllium and lead among others. These wastes can have adverse effects on the nervous system, brain and kidney.
The global e-waste management market can be segmented on the basis of the source of waste generation into domestic, IT and Telecom, consumer electronics and others. Domestic segment includes e-waste such as refrigerator, TVs and waste washing machine. North America and Europe are very sensitive to environment pollution. Hence these regions contribute most to the global e-waste management market.
Rapid technology development and replacement of equipment coupled with the migration from analogue to digital technologies have fueled the global e-waste market. New innovations in technology such as a shift from curved to flat screen TVs and monitors are also driving the global e-waste management market. Moreover, the economies of scale have given consumers advantages in term of prices, which has increased the demand of many electronic products such as mobile phones. This has also increased the amount of e-waste. The increasing amount of e-waste every year will provide a great opportunity to the e-waste management market. However, improper e-waste management system in several parts of the world is hampering the growth of the global e-waste management market.
Some of the key players in the global e-waste management market are Electronic Recyclers International, Inc., Sims Recycling Ltd., E-Waste Harvesters, Electronic Waste Management, E-Waste Systems, Inc., MRI (Australia) Pty Ltd., Desco Electronic Recyclers and Waste Management Inc. among others.
Transparency Market Research (TMR) is a market intelligence company, providing global business information reports and services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insight for thousands of decision makers. TMR’s experienced team of analysts, researchers, and consultants, use proprietary data sources and various tools and techniques to gather, and analyze information. Our business offerings represent the latest and the most reliable information indispensable for businesses to sustain a competitive edge.

TRAI bats for common optical fibre infrastructure

Telecom regulator TRAI is in talks with the states over laying of common optical fibre infrastructure and would release its recommendations soon to improve high-speed broadband connectivity in the country, its chairman R S Sharma said on Thursday. The regulator is advocating a common duct infrastructure which could be used by any operator who wants to lay optical fiber network. Speaking at the Broader Way Forum India, Sharma said digging of roads to lay Optical fiber cable should be done once and all operators should be able to utilise a common duct for laying cables.
“We are saying that a common duct infrastructure be made by an third party and that should be done in a transparent. Any operator who wants to lay fiber should be able to use that duct. We will be giving our recommendation very soon. We are having some discussion with states,” Sharma said. He said country needs model aligned to incentive where interest of users, operators and government is aligned. For faster rollout of wireline networks, the Department of Telecom recently notified Right of Policy to facilitate common rule across country.
On the occasion, Telecom Minister Manoj Sinha said that there is need for enhancing penetration of wireline connection in the country for providing high speed broadband. “Broadband speed in India are lowest in the world. South Korea on the other hand has an average speed of 29 mbps. Presently wireline connectivity a fraction of wireless connectivity in our country. In order to explore the true potential of broadband, it is important to look at improving the wireline connection in India,” Sinha said.
He said that government itself is aggressively rolling out BharatNet project by laying optical fiber patch cord for providing high speed broadband service.”Industry has huge role to play in this transformation. Telecom service provider and other internet service provider are rolling out fibre in their respective market,” Sinha said. Huawei India CEO Jay Chen asked the government to release spectrum in E and V bands as they will act like optical fibre in air and resolve high speed connectivity issue to some extent.
Telecom operators have sought the opening up of new frequency bands — 71-76 gigahertz (GHz) and 50 GHz. Wireless services deployed in these bands are believed to deliver broadband speed of up to 1 gigabyte per second as in the case of optical fibre. Opening up of backhaul spectrum is expected to reduce cost and time of deploying networks and also resolve the tedious process of seeking permit from local authorities of laying out optical fibre network.