Aluminum double glazed windows good maintenance can extend service life

Aluminum double glazed windows have very good superior performance. Many families generally choose aluminum alloy doors and windows when purchasing doors and windows. Aluminum doors and windows have the characteristics of anti-corrosion and moisture resistance, not easy to fade and deformation, etc., but if they are well maintained, the daily life of aluminum doors and windows will be longer.

In terms of cleaning, generally aluminum double glazed windows basically rely on rails to control the opening of doors and windows, so the general lower track is the focus of door and window cleaning. The bottom rail and woolen top are very easy to accumulate dust and small dirt, and it is also very difficult to use. So when cleaning, you can use a vacuum cleaner to remove the accumulated dust, and then use a rag or sponge, moistened with water and neutral detergent to scrub.

But remember that you must not use strong corrosive cleaners, and you can only wash them with water in the end. When scrubbing aluminum alloy doors and windows, choose soft gauze or cotton silk, etc. This is to avoid scratching the surface of doors and windows, and it is best to remove the windows when scrubbing aluminum alloy doors and windows, which can not only wipe clean, but also Can guarantee safety.

It should be noted that if water is found in the track chute, it should be wiped dry in time. This is to enhance the anticorrosive effect, so you can apply a thin layer of fire wax oil on the track surface. It is also necessary to avoid acidic and alkaline chemicals when they come into contact with the aluminum double glazed windows. Therefore, when there are stains and stolen materials, you can usually use a soft cloth to stick to clean water or neutral detergent to clean. This is to prevent doors and windows. Corroded.

The focus of ordinary maintenance is that the hardware accessories at the interface need to be checked frequently, including locks, hinges, seals, positioning pins and wind braces. Because these parts are often subject to friction, they are relatively susceptible to rust and damage. Usually need more inspections, timely replacement of damaged parts, and regularly add lubricating oil.

In terms of use, because aluminum alloy door pages generally rely on splicing and embedding technologies to assemble and connect accessories such as hinges, strong forces are likely to cause deformation. Users and friends should pay attention to daily pushes and pulls. .

What are the advantages of food container aluminium?

The food container aluminium is a very widely used tableware, and its product is light in weight and is very in line with national food hygiene standards. And because it is easy to recycle, no harmful substances will be generated during the process and it will not pollute renewable resources. At present, aluminum lunch box products are generally used in aviation food and cake food retail. The update speed is fast and the consumption is large, which is very suitable for mass sales.

Aluminum foil has strong barrier properties. When the thickness of the aluminum foil is sufficient, it can block gas and moisture. Therefore, it can be used as a commonly used barrier material in plastic flexible packaging materials, and it is believed that the aluminum foil has light weight, airtightness and coating. A series of advantages such as good sex, so it is hygienic, beautiful, and can be insulated to a certain extent.

Food container aluminium is usually surface-coated, and this has nothing to do with the thickness of aluminum foil.

This food container aluminium not only meets the national food container hygiene standards, but also more importantly adapts to the current international environmental protection trend. Therefore, the product can be directly heated on a gas stove and baked in a microwave oven without fear of danger, which brings great convenience to people.

 

 

 

 

 

How to improve the comfort of Container Prefab House

Generally speaking, the house built with Container Prefab House has modern beauty, and can also be designed in different ways according to customer requirements, so as to meet the aesthetic requirements of different groups of people. However, there is still a big difference between the traditional shell and the container shell. So how to improve the comfort of container houses?


The windows and doors should be placed effectively. Generally speaking, a good living environment should have a bright light source and an excellent gas environment. Therefore, in order to improve the comfort of the container shell, generally during the entire process of engineering construction, Everyone opened the windows and doors in a valid position. The best orientation is to open the window from the north to the south and the sun will go in. The window to the south is more conducive to natural ventilation.


The insulation layer of the Container Prefab House should be suitable. Compared with the traditional residential structure, the thickness of the container is thinner, but because the metal material has heat transfer properties, the convenience of heat insulation of the container house will be more convenient than the traditional The house is weak. Therefore, in order to improve the comfort of clothing, food, housing and transportation, when constructing a house containing craft containers, be sure to use thermal insulation boards and good insulation materials, so that everyone can feel the house's warmth in winter and cool in summer.

Container houses are generally set to weather.com. There is no need to set up a semi-open kitchen, so pay attention to the effective design of the smoke exhaust pipe to prevent the thick smoke from spreading into the room, causing the indoor soft clothing and clothes to be smoked. Pollution. In addition, in the dining room kitchen, it is necessary to use a closed tube with a high tightness.

What should I do if the electric hot water heater cannot catch fire?

Generally, it is impossible to catch fire because the solenoid valve of the electric hot water heater is malfunctioning. The basic performance phenomenon is that there is only the ignition sound during ignition, and there is no magnetic sound of the solenoid valve. This may mean that the solenoid valve is damaged or aged, resulting in If the gas pressure is too high or too low, it will not be able to catch fire, or because the solenoid valve has stolen materials, which will cause the gas to come out and not ignite.

The general solution, for example, the solenoid valve needs to be replaced if it is aging. If there is a gas pressure problem, it needs to be replaced with a new gas bottle. If the gas valve has stolen goods, it needs to be cleaned up. If it is an ignition control circuit, it needs to be replaced. Repair circuit problem.

It may also be due to the failure of the water-air linkage device, which is manifested as the absence of ignition sounds and electric sparks. In general, the test method is to check the tympanic membrane in the water-air linkage valve for aging or damage, and can not push the micro switch. At this time, replace the water-air linkage valve or repair it.

Generally, there are the above reasons why the electric hot water heater cannot catch fire. If you encounter such a situation in the future, you can simply deal with it according to the above method. If you cannot solve the problem, it is better to find a professional to deal with it. It is worth noting that you should pay attention to safety during the inspection and cut off the power to protect yourself.

granule packing machine follows industry production to meet market needs

The packaging machinery industry has developed late, but with the continuous innovation of high and new technology and the rapid development of market economy, various packaging machinery and equipment are changing themselves, so that people’s quality of life is more improved, and so is the automatic granule packaging machine.

Is moving forward rapidly in the development process, and has been recognized and loved by more consumers. Now that the consumer’s consumption direction has changed from the original quality to the product grade, how to bring the appropriate outer packaging to the product has become a consideration for every manufacturer. The main reason for the development of the granule packing machine in the market is also her continuous use of new technologies The main reason for innovation and thus steady growth in the market.

As a professional packaging machine manufacturer, packaging machinery understands that the current production quality and production technology are constantly developing, so the granule packing machine must follow the needs of the industry to enable itself to have higher production technology and production efficiency. In the growing market, the automatic granule packaging machine meets the packaging needs of various granule products, so that they have advanced production technology, so as to follow the needs of the commodity market and consumers to bring new developments.

Currently, the sales of granule packing machine in the market cannot be separated from advanced technology and efficient production efficiency, so it is welcomed by consumers, and has become one of the indispensable equipment for enterprises in such a commodity market, thus bringing product production belts. Come to better opportunities to meet the development of the market economy so that you have better development and bring you better growth and development.