ライフ、健康

元気で幸せで暮らすため いい生活習慣を身に付けまましょう

HOW TO MAINTAIN LIVING ROOM SOFA

2020-01-07 11:42:37 | 高齢社会

        The leather living room sofa is the easiest to get dirty. The anti-fouling work must be done well. The stains such as ink and stains are best to use the special cleaning agent for the leather living room sofa. You can also use a small amount of alcohol to wipe the living room sofa, and then wipe it with a wet towel. Remember that the leather living room sofa cannot be exposed to the sun, but the leather living room sofa cannot be used on the living room sofa with sharp objects.

         The wooden living room sofa should be dry during maintenance. If it is too wet, the wooden living room sofa is prone to decay, so the living room with the wooden living room sofa must always open windows and ventilate to keep the room dry. The wooden living room sofa should also be kept away from the heat source, because the continuous high temperature will evaporate the original moisture of the wood, which will cause the wooden living room sofa to not last long. Therefore, when cleaning, do not wipe with a damp cloth, the paint surface will not be damaged by wiping. The wooden living room sofa should be regularly waxed to increase the durability of the wooden living room sofa.

The fabric must be scratched. The living room sofa is made of fabric. Therefore, when using, try not to let the water quality of the ink is lower than the living room sofa, and do not let sharp things on the living room sofa. The best way is to lay the living room sofa cushion.

The leather should pay attention to wear. The living room sofa made of leather should avoid serious wear. Usually, do not use sharp objects to wear on the living room sofa. Regular waxing and maintenance use special leather cleaners and protectors to increase the leather living room. The durability of the sofa will last longer.


What is wood grain paper decorative material

2020-01-07 11:36:30 | 高齢社会

        The wood grain paper is actually the skin decoration paper, and the raw material is actually the wood pulp kraft paper, so the strength of the paper is greater. You can decorate and trim furniture or office supplies. Wood grain paper also needs a certain lacquer treatment after veneering. Wood veneer is a semi-natural decorative material.

        In addition to the above advantages, the price of wood grain paper produced by woodgrain paper manufacturers is very low, because the raw materials are relatively easy to obtain and the processing is relatively simple, so the cost is relatively low. Wood grain paper can be applied to furniture and office supplies. It is a very suitable decorative material, so its covering performance is better. Because wood grain paper is made of wood, it is non-toxic and tasteless, and because it is chemically treated, it is very abrasion-resistant and flame-retardant.


What is wood grain paper decorative material

2020-01-07 11:21:19 | 高齢社会

        The wood grain paper is actually the skin decoration paper, and the raw material is actually the wood pulp kraft paper, so the strength of the paper is greater. You can decorate and trim furniture or office supplies. Wood grain paper also needs a certain lacquer treatment after veneering. Wood veneer is a semi-natural decorative material.

        In addition to the above advantages, the price of wood grain paper produced by woodgrain paper manufacturers is very low, because the raw materials are relatively easy to obtain and the processing is relatively simple, so the cost is relatively low. Wood grain paper can be applied to furniture and office supplies. It is a very suitable decorative material, so its covering performance is better. Because wood grain paper is made of wood, it is non-toxic and tasteless, and because it is chemically treated, it is very abrasion-resistant and flame-retardant.


What are the factors that affect the molding of Vertical injection moulding machine for rubber?

2020-01-07 11:01:23 | 高齢社会

  Vertical injection moulding machine for rubber during manufacturing molding will have many factors that cause the product to be defective, such as temperature and injection time, which may affect the molded product.

         1.Temperature

         The temperature mentioned here refers to the temperature of the mold and the temperature of the raw material heating. The mold temperature is mainly an indispensable link during injection molding. The lower the mold temperature, the faster the speed of heat loss due to heat conduction, and the higher the melt temperature. Low, the worse the associated liquidity.

          Therefore, accurate control of the mold temperature is crucial for injection molding. Then it is the raw material heating temperature. Due to the special nature of the material, it needs to be heated in the raw material tank, such as BMC material.

         2.Time control of injection molding

         The impact of injection time on the quality of injection molded products is mainly reflected in these three aspects.

         Long injection time will cause the product to reach the optimal molding temperature, which will lead to poor molding materials.If the injection time is not enough, and the mold cannot be filled at all, it will also affect the product quality.

          When the injection time is shortened, the shear strain rate in the melt is increased, so that the shear heating is greater, and less heat is lost due to heat conduction. Therefore, the higher the melt temperature, the lower the viscosity. The injection pressure will be reduced accordingly. This shows that the injection molding process needs to be tested and monitored at any time.


sliding head cnc lathe processing development prospects

2020-01-07 09:14:08 | 高齢社会

       CNC automatic machine tools generally have stable processing accuracy, high degree of automation and high processing efficiency. Different from ordinary lathes, automatic lathes use digital controllers for automatic processing. This requires experienced commissioning personnel to operate and use automatic lathes.

          Many mechanical processing companies are still using backward manual operations to process these parts with manual instrument lathes. Therefore, both in terms of labor intensity and processing accuracy will have a great impact, these will affect the overall efficiency of the enterprise.

       With the development of technology, mechanical processing is developing in the direction of numerical control processing, high quality and high efficiency. Therefore, the use of automatic lathes has become a trend. With the development of information technology, the scope of use of CNC lathes has been greatly increased, which can promote industrial production to a certain extent and improve work efficiency. From the aerospace industry to the manufacture of automotive electronics, there is no need to say sliding head cnc lathe. The convenience and efficiency of CNC lathes for processing