Regardless of the equipment, there are precautions for the use of the product when it is used. The thickness gauge is no exception. Today, let me introduce you how to use the device correctly.
Coating Thickness Tester is a common device for testing thickness. It can be seen in many industries. For such a device, we have a lot of attention in its use. There are still many types of thickness measuring instruments. Different types of equipment are suitable for different types of equipment. When using them, pay attention to the equipment and not use them casually. Many people may say that because the thickness gauge has a split laser and X-ray, the two thickness gauges are different for the product. In general, it is recommended that you look at the product equipment manual, pay attention to see what is the corresponding product of this equipment, only the right medicine can play the equipment high efficiency.
Coating Thickness Tester mainly tests the thickness of the product. Some products are thin and can not be seen by the naked eye. You can understand how fine the equipment works. If there is a slight deviation in the use, the test results may be different. Therefore, when using the device, you must first do the calibration work and place the product in an accurate position so that accurate data can be measured. When using the thickness gauge, pay attention to the test products that the equipment can accept. If the product is too thin, the equipment will not work.