In 2012, Pike County was in the national spotlight when reality television camped out at a local hotel. There were hazmat suits at Wal-Mart, protesters in front of the Tennessee Gas Pipeline Company and even an mysterious wildcat sighting in the woods. This is a review of the top Pike County stories of the month in 2012.
The FOX Television reality show "Hotel Hell" starring hot-headed masterchef Gordon Ramsay filmed at the River Rock Inn, Milford. The episode aired in August. Although Ramsay was seen on television bedding down at the River Rock Inn,Each travelling cable is made from several lengths of steel material wound around one another. he was only acting, and actually stayed at Milford's luxurious Hotel Fauchere.
The National Park Service released a request for proposals searching for an operator for the historic Cliff Park Inn hotel, restaurant and golf course which has been closed since October 2011. The RFP showed the place needs more than $1 million in repairs. The lease deal would require an operator to pay for the repairs. Local golfers are itching to get back on the popular course, but the park service will not open the golf course because there is still no operator.
Pike commissioners approved a bond with $10 million to pay for an expansion of the historic courthouse in Milford. This is a major project that could change the character of Milford. The expansion is needed because the outdated courthouse makes it difficult to manage security.A research team headed up by the University of Houston is on track to develop a superconducting wire for wind power generators.The industrial dry cleaning machine market demands reliability and efficiency.
The discovery of white powdery substance caused the evacuation and a four-hour closure of WalMart in Westfall Township. The powder was found in a self-checkout lane by a manager who was cleaning out a machine.In a elevator parts system, steel cables bolted to the car loop over a sheave. A federal government hazardous materials team, part of the Picatinny Arsenal Fire and Emergency Services from New Jersey, responded in full hazmat suits. The team performed a series of tests and found the powder was not toxic.
The Federal Energy Regulatory Commission approved Tennessee Gas Pipeline Company's request to build a pipeline loop on new land to avoid using its existing right of way through the Delaware Water Gap National Recreation Area.
The move mobilized a new group of activists, many who live near Cummins Hill Road in Milford, where the pipeline will slice through forest land.
Delaware Valley School District Superintendent Candis Finan retired after 31 years, and John Bell was hired to lead the district into the future. School superintendent is one of the key leadership positions in the county.
Jim Lord of Shohola swears he and his dog Maxy saw a mountain lion, or cougar, at dawn in his yard. The Pennsylvania Game Commission receives a few dozen reports of mountain lion sightings a year, but the official word is: Cougars were hunted to extinction in the late 1800s. Lord,Horizon manufacture a range of laundry dryer fans for efficient exhaust ventilation. a retired professional photographer, kept his camera on the ready in case the cat came again. We have not heard back from him yet.
Pike commissioners decided to end the countywide recycling program and made plans to remove nine large recycling bins placed around the county. Pike residents who wish to recycle must now get that service through their trash hauler.
Westfall Township supervisors proposed a tax on canoe liveries and fireworks sales. It was the seed of what is now known as the fun tax, a 1 percent tax on anything considered entertainment where admission is charged except for movies, which are exempt. The tax includes admissions to high school sporting events and plays, golf driving ranges, entertainment events such as music in parks and carnival rides, and gun shows and home shows.
Census numbers proved what some suspected: Pike County is no longer the fastest growing county in Pennsylvania. New numbers showed Pike to be the fourth-fastest shrinking county in the state. Pike had 56,852 people, according population estimates from the U.S. Census Bureau. That was down 515 residents in a year.
Route 209 in Dingmans Ferry opened after being closed for 13 months. The road in the Delaware Water Gap National Recreation Area required $4.3 million in repairs after the earth under the road shifted and caused the road to shift.
There’s a lot at stake at UFC 155 beyond the main event,In a elevator parts system, steel cables bolted to the car loop over a sheave. which features the heavyweight title bout between champion Junior Dos Santos and challenger Cain Velasquez.
A number of fights stick out as potential show stealers, but when it’s all over somebody has to win, somebody has to lose, and now we take a look at the five fighters at UFC 155 who are in the biggest must-win situation.
Without a doubt the fighter who needs a win the most at UFC 155 is main event fighter and former heavyweight champion Cain Velasquez.
The truth of the matter is Velasquez may very well be the No. 2 heavyweight in the world, and an absolute wrecking machine that tears through the rest of the division,Horizon manufacture a range of laundry dryer fans for efficient exhaust ventilation. but if he loses for a second time to Junior Dos Santos on Saturday night,The industrial dry cleaning machine market demands reliability and efficiency. his prospects of getting a third crack at the Brazilian fall somewhere between slim and none.
There’s a list of fighters who have fought for the belt a couple of times against the same champion, and if there’s one indisputable truth that continues to show through it’s that a third shot will almost never, ever happen.
The toughest part about this rematch is that it comes only a year after the first fight when Dos Santos flattened Velasquez with strikes just over a minute into the first round. Since that time both fighters have only fought once, both picking up dominant wins,Each travelling cable is made from several lengths of steel material wound around one another. but now they are back together for the rematch.
Velasquez has to know that this fight is “win or go home” in terms of his championship dreams in the division so long as Dos Santos is holding the belt. In terms of “must win”, Cain Velasquez is by far at the top of this list.
Middleweight Tim Boetsch was originally scheduled to fight at UFC 155 against fellow top ten opponent Chris Weidman in a bout that would almost guarantee the winner a crack at Anderson Silva in 2013.
Unfortunately, Weidman suffered a shoulder injury that put him on the surgeon’s table instead of inside the Octagon, so now Boetsch faces Costa Philippou instead.
Make no mistake, Philippou is a dangerous opponent with very good boxing and knockout power, and Boetsch has to be wary of facing a guy coming in on short notice with nothing to lose in this fight. The short notice isn’t even really short notice because Philippou had been training and preparing for a fight at UFC 154 that didn’t happen due to his opponent pulling out because of illness just 24-hours away from the event, so he’s been in shape and ready since that time.
Meanwhile Boetsch has everything to lose if he can’t come out on top in this fight. He has a chance to make a big statement to everyone in the division if he can put Philippou away early or dominate him for three rounds.
Anything short of that or a loss will move Boetsch back to the end of the line in the middleweight title discussion, and names like Michael Bisping become the clear cut favorite to get the next shot at the belt when Anderson Silva returns next year.
Former Ultimate Fighter competitor Chris Leben has gone through personal trials and tribulations that most competitors wouldn’t wish on their worst enemies. Obviously Leben has to take ownership for much of the misery he’s gone through over the past few years, but that doesn’t take away the fact that he’s had to suffer through it all.
Now Leben returns off of a one-year suspension following a positive drug test for painkillers when he took on Mark Munoz in 2011. This isn’t the first misstep Leben has made during his career, but he’s vowed that this is his chance at redemption after cleaning up his life, and now walking the straight and narrow.This web site tells you how to make a set of blades for a small wind generator using PVC pipe.
It all comes down to the fight at this point and Leben takes on late replacement and Strikeforce transfer Derek Brunson. On paper, Leben is the decided favorite, and has more fights in the Octagon than Brunson has in his entire career.
The Syrian opposition destroyed 19 Mig fighting jets and 22 helicopters belonging to the regime's air force in 2012, according to survey by the Union of the Syrian Revolution Local Coordination Committees.
Eleven planes were destroyed on the ground in opposition raids on various air bases across the country and 30 were shot down in action.
A sizeable number, 43, of aircrafts destroyed was registered in the province of Idlib, where the first Mig fighter jet was shot down.
In Damascus 16 planes were destroyed, eight in Aleppo, seven in Deir Ezzour,Horizon manufacture a range of laundry dryer fans for efficient exhaust ventilation. five in Hama and two in Homs.
The survey showed increasing efficiency of the FSA's air defenses and capabilities to shoot down the regime's planes.
In total 103 planes were destroyed since the uprising began last year, the Coordination Committees reported, saying that 83 of those planes shot down or destroyed on the ground were video-taped.
August and November 2012 saw the highest rate of destroyed aircrafts,Each travelling cable is made from several lengths of steel material wound around one another. with an average of about one aircraft a day in both months.
Although the Syrian regime accuses the FSA of having received heavy weapons from Arab and Western countries, Al Arabiya correspondent in northern Syria revealed that all aircrafts were shot down by air defense weapons that FSA members seized in battles with the regime forces.
The FSA relies on the anti-aircraft machine guns including the “Twin ZU-23” to shoot down the aircrafts. They were initially provided for the Syrian army by the Soviet Union during the seventies and eighties.
Using the Syrian Air Force in bombing civilians is not unprecedented in the country. The Baathist regime previously used the air force to silence the Muslim Brotherhood’s uprising in the 1980s. It was also used during the massacre of Hama in 1982 where many aircrafts shelled the city and its old districts with bombs and missiles in order to destroy the city and facilitate the entry of tanks and armored vehicles into its roads.
Military helicopters have also been used in several massacres and other campaigns in the 1980s, mostly in al-Zawiya mount in the northern city of Idlib. The most renowned invasions took place in Jericho, Mahmpel and Blaine, all of which occurred in 1980.A research team headed up by the University of Houston is on track to develop a superconducting wire for wind power generators.
During the massive protests that began in May 2012, the first reports were finally received about the Syrian Air Force participating in the oppression of the protests during the invasion of the cities of Jisr ash-Shoughour and Maart al-Naaman located in the province of Idlib, northwest Syria.
Activists said that military helicopters were used to shoot the demonstrators in Jisr ash-shoughour in June 4 and 5 2011. The operation led to the deaths of 38 civilians in two days.
Few days later, helicopters opened fire to break up thousands of demonstrators in the city of Maart al-Naaman.The industrial dry cleaning machine market demands reliability and efficiency. The shooting killed four protesters and injured dozens of others.In a elevator parts system, steel cables bolted to the car loop over a sheave.
During the past months, the use of warplanes to bomb Syrian cities and towns increased as it reached bombing neighborhoods in Aleppo and Damascus, after the regime had lost control on the ground.
Syrian people are now complaining about what they call “explosive barrels” that cause enormous devastation. They are locally-made and filled with highly explosives “TNT.” They are released from military helicopters.
The regime is also using heavy machine guns and guided missiles according to previous statements by a “Taftanaz” military airport officer in his interview with Al Arabiya.
While studying to become a court reporter, Maria Schultz's only frame of reference for the profession came from watching "The Carol Burnett Show."
"They'd do these courtroom sketches and show this little lady typing furious into a little typewriter," she said. "Let me tell you, court reporting is nothing like what you see on TV."
Schultz, 55, ought to know. A court reporter for Iowa's 3rd Judicial District for 33 years, she's worked with Judges William Adams, Phillip Dandos and, for the past 11 years, Edward Jacobson. She will retire Monday.
"Time has flown by," Schultz said a few days away from retirement. "And I've enjoyed every minute of it.Each travelling cable is made from several lengths of steel material wound around one another."
A court reporter transcribes spoken or recorded speech into written words, producing the official transcript of court hearings, trials and depositions. Court reporters use a stenotype machine, a tiny typewriter with 22 keys. By tapping one or more keys, a reporter can capture the sounds of words in a special phonetic code.
A skilled shorthand reporter like Schultz can easily type more than 225 words a minute, a rate actually faster than most people speak.
When she began her career in 1979, Schultz would have to type the same transcript at least a few times. The process involved the original transcript plus two or three copies made using carbon and onion-skin paper.
"If you typed a mistake, you would have to stop and erase every copy," Schultz said. "It was very time consuming."
Later, computer-aided transcription allowed her to write on electric steno machines and save notes.Horizon manufacture a range of laundry dryer fans for efficient exhaust ventilation. Machines today translate Schultz's text directly to the laptops of attorneys and judges in a court case.
"When I talk about how nice it was getting electric typewriters back in the 1980s,The industrial dry cleaning machine market demands reliability and efficiency. younger people will invariably ask, 'What's a typewriter?'" she said with a laugh. "Yeah, things have really changed."
Although electronics have made court reporting less arduous, Schultz's work requirements have steadily increased.
"Due to budget constraints, a court reporter is now often a judge's sole support person," she said. "We're the judge's scheduler, bailiff and administrative assistant in addition to being their court reporter." Yet Schultz said she's always been up to a challenge.
"A court reporter needs to be organized and can't be afraid of hard work," she said. "When my parents learned that (Des Moines') AIB School of Business offered a court reporting major, they knew it would be right up my alley."
In fact, there have been times when Schultz has had difficulty separating work life from home life.
"I drive my husband, Roger,This web site tells you how to make a set of blades for a small wind generator using PVC pipe. crazy when I refer to Judge Jacobson as 'my judge,'" she said. "That's simply how court reporters talk. We say 'my judge' said this or 'my judge' did that.In a elevator parts system, steel cables bolted to the car loop over a sheave. It's a hard habit to break."
Still, Schultz acknowledges she's had the opportunity to see a side of judges most people will never see.
"Judges can be intimidating in their black robes," she allowed. "But they're also people with kids and grandkids, like everyone else."
As she gets ready to leave her front row seat inside the Woodbury County Courthouse for the last time, Schultz said she looks forward to spending more time with her husband and children, Zachary, 25, and Jordan, 18.
"The last 33 years have gone by in a blur," she said, glancing back at her steno machine. "That can happen when you're doing something that you love."
Let's face it, you've looked at what people do with the Japanese lunchbox meal known as bento and you've died a little on the inside. You've fawned over the adorable nori covered pandas, the Angry Birds and even the freakishly accurate Piglet bust.The first production laser marker was used to drill holes in diamond dies. You repinned all of these things knowing full well there's no way in hell you're waking up at 4 AM to churn out one of these for your spouse or children. Well prepare to die a little more because someone has brought a goddamn industrial laser cutter into the bento box game.
Matthew Borgatti is an artist and designer who acquired a $5,This web site tells you how to make a set of blades for a small wind generator using PVC pipe.000 laser cutter for work and then promptly put it to good use carving molten images into toast.Do you have any problems with a street lamp or illuminated traffic sign? Beyond the fancy cut seaweed though,A pendant lamp with candle accents can also be updated easily. the bento also features grilled octopus, beef shumai, winter squash and tempura shrimp. The image in the seaweed is drawn from an anime called Princess Jellyfish,There are many brands and makes of industrial washing machine, they are all basically the same in principle and function. which defies an simple explanation.
We had a chance to speak via email with Matthew and he shed a little light on his process.
1. What's the process for making something like this? Do you start with a digital drawing? Scan something in?
It started with research and sketching. Numi and I gathered pics of bentos, measured the bento box I've got in my kitchen, and started building a plan of attack. We wanted to create something pretty that would contrast well with an illustration. The original idea was to integrate the laser cut elements with the bento ingredients more organically, but nori doesn't stand up to moisture well and we had to scrap that plan.
After we made a shopping trip to pick up colorful bento ingreedients, I hunted around online for a good image to play with. The picture I found was originally in color and much more detailed, but it had to be scaled back to work in nori. A lot of the work went into adjusting the illustration to work in seaweed. Since the laser works by burning away the material you're cutting, a rectangle in the final material will come out smaller than you'd mocked it up on the computer. Also, since the nori is so delicate, it is important to have supporting structures and bridges for all the different areas so they don't snap off and can be easily laid on the rice. It's a lot like making a spray paint stencil.
2. How much tweaking did you have to do to make it work with the nori (about how much time did you spend burning nori before you found the right amount of etching).
It was a time consuming process, but wasn't all that much work once I'd made some experiments and dialed the laser in.. maybe three hours total. The confounding factor of the etched part was that the nori varies in thickness. It's not like a sheet of paper, which is really consistent. Nori wobbles and even has little holes. This meant that my first tries in etching ended up with lace thin nori that came apart in my hands save for a few stronger spots. I tried some new halftone patterns and playing with the settings, and eventually found that just barely scoring the seaweed had as much of a visual effect as trying to go straight through. For future revisions, I might switch to lots of holes punched straight through at various powers rather than trying to raster a pattern on.
3. Any plans for any other laser cut foods?
I used to laser cut random foods at every possible opportunity when I worked over at Instructables. I etched pictures on cream cheese bagels, tried to cut through a raw egg (a mistake in retrospect), and generally made a mess daily. Now that I've got a laser living in my home, mere feet away from where I'm writing, I can continue the experiments. I've already done a series of portraits on toast. I've got plans to make a laser powered Candyfab in the near future, but it's not the most urgent project on the list.