Software introduction about 2018.12 MB Star SD Connect C4 C5

Newest version 2018.12 MB Star SD Connect C4 C5 diagnostic software has been tested and verified no issue with SD Connect C4/SD C5 multiplexer.

Software languages: Chinese, English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish & Turkish.

Software includes:

1.DAS 2018.12: the automatically Diagnosis Assistance System

Xentry 2018.12: New software released by Bennz Company after 04/2009 by diagnosis new cars.
WIS net 2018.09:Workshop Information System

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

EPC.net 2018.09:Electronic Parts Catalog
ST Finder:Part Location Finder options: 2008 and 2016
STARUTILITIES :the movement management system and self-test
SD MEDIA 2014
PL72: 2018 Mercedes software with PL70
Engineer Software：DTS monaco V8.03 And Vediamo V5.01.00 Support Offline Programming
HHT Software for old cars

Xentry software display:

16.1
16.2

16.3

16.4

16.5

Note:

The 12.2018 MB Star SD Connect C4 C5 software can support HHT-WIN.But this HHT can only support some old Mercedes cars (before 1996). If you need to support all the old Mercedes-Benz (before 1996) please use 2016.06 MB Star SD Connect C4 C5 with HHT diagnostic software, this version with HHT software can support all the old Mercedes-Benz diagnostics.

Mercedes BENZ C5 SD Connect Xentry Tab Kit Technical Support

Why MB Star Diagnostic tool is so well-received by thousands of users, its technology and quality is developed after lots of experiments and improvement. Recently, we mbstar shop website provide a new Star diagnosis bundle, Mercedes BENZ C5 SD Connect Xentry Tab Kit( Newest Mercedes BENZ Diagnostic Tool;Original second hand Mercedes BENZ C5 SD Connect Xentry Tab Kit;With original software and tablet kit;Support BENZ latest protocol)

BENZ C5 SD Connect Diagnostic Tool Description:
Mercedes Benz C5 Xentry Connect diagnostic interface, produced by French ACTIA Company and equipped with Panasonic Xentry-Tab, can test Engine / Transmission / air conditioning /SRS/ABS/ anti-theft system and OBD-II system.
Benz C5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
BENZ C5 SD Connect Diagnostic Tool Feature:
Efficient diagnostic program and complete vehicle database
Simple and easy-to-use user interface (UI)
High-performance Tab with 4G memory and 13.3 inch LCD touch screen
Advanced upgraded VCI+ communication inter
Support Wired/ wireless connection
Cover all new Mercedes Benz models.
BENZ C5 SD Connect Diagnostic Tool Configuration parameters
A full set of kit configuration
1.Panasonic newest widescreen tab.
2.The original Xentry-Connect by ACTIA
3.Mercedes Benz OBD2 diagnostic cable

Xentry-Connect (VCI+) Technical Parameters:

1.OS: Windows Embedded Standard 7(32bit)
2.Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
3.Memory: 4G hard disk with 256GB SSD
4.Display: 128*64 PX
5.Battery: 40 minutes (When CPU capacity to 60%)
6.Weight: 1.9KG
7.Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ

Launch X431 V+ HD III VS HD-II working with X431 V+

What advanced features LAUNCH X431 V+ HD3 module has that HD-II module has no?

Good to know

HD-II module: compatible with X431 V+, X431 PRO3, X431 PADII etc, only available for Commercial Vehicles.

LAUNCH HD-III module : compatible with X431 V+, pad3, pro3 etc, only available for X-431 V+ of Commercial Vehicle Version.

Note:

Please buy HD-III module instead of HD-II module, because HD-II module is already stop to produce.

There are main 3 differences between X431 V+ HD-III module & HD-II module

Different 1.

HD-III module: in Blue color

HD-II module: in Red color

launch x431 HD III Scan Tool outlook

As the 3rd generation of heavy-duty module,Launch x431 HD iii scan tool works as a vehicle communication interface device, which is used to read the vehicle data and then send it to the X-431 V+ via wireless BT/WLAN communication. The LED indicators enable you to easily identify the working status of the module.

1 DC-IN power jack: For connecting the power adaptor.

2 Diagnostic socket: For connecting the diagnostic cable.

LED indicators: It is defined as follows:

 Vehicle: While communicating with the vehicle, the indicator lights up and flashes. Otherwise, it will not illuminate.

 Power: It illuminates solid red when the module is powered on.

 BT: Blue indicates the module is working in wireless BT mode.

 I/O: It lights up when the module is connected to the diagnostic tool via data cable (Currently disabled and only reserved for subsequent function extension).

 Wireless: It lights up when the module works as a wireless hotspot or network adaptor.

Data I/O port: Currently disabled and only reserved for subsequent function extension.

HD-II Module outlook

As the 2nd generation of heavy-duty module, it mainly functions as a VCI device for accessing vehicle data.

LED indicators: It is defined as follows(from left to right):

 Power Indicator: It lights up when it is powered on.

 Communication LED of Tablet: It illuminates when the module is communicating with the tablet.

 Communication LED of Vehicle: It lights up once the module is connected to a vehicle’s DLC.

 Communication LED of PC

 Data I/O LED

Data I/O port
Communication Port of PC
Diagnostic Socket: To connect the included diagnostic cable.
DC-IN power jack: To connect the power adaptor.

Different 2.

HD-III module: send the vehicle data to the diagnostic tool via wireless Bluetooth or Wlan

HD-II module: send the vehicle data to the diagnostic tool via wireless Bluetooth.

WIFI module:

HLK-RM08K

 Frequency range: 2412-2472MHz

 Transmit power: 19.29dBm

Wireless BT module:

YG-218M-A2

 Frequency range: 2402-2480MHz

 Transmit power: 16.62dBm

X-431 V+ is compatible with the following two Heavy-duty VCI modules. For different VCI modules, the communication methods vary.

Below shows how the X-431 V+ system works.

HD-III module:

Besides the BT communication, the LAUNCH X431 HD III VCI module comes loaded with a built-in WLAN module, which can work as a wireless hotspot or a network adaptor.

Below shows how the X-431 V+ system works.

HD-II module:

The HD-II module send the vehicle data to the X-431 V+ diagnostic tool via wireless Bluetooth only.

How to Change John Deere Speed Limit with PLD File Editor

John Deere PayLoad (PLD) File Editor – this is Developer level tool, that allows you to change factory parameters in the PLD files using John Deere Service Advisor.

With John Deere PLD File Encryptor/Decryptor you can:

-Decrypt PayLoad (PLD) file to txt/ini format
-Modify PLD file expiration
-Modify PLD factory options such as speed limit (for example change 40 km/h to 50 km/h)
-Adjust PLD file to different product serial
-Encrypt PLD file
-Program controller with modified PLD using Service Advisor
-Support Windows XP

Example: How to change speed limit with pld files?

Q1:

Question about payload files:

I have pld files of my tractor (6330P) 11 in total.

I see in bottom of each files info about my tractor (option, serial number etc)

Question: My goal is up the speed limit from 40km to 50 km. I think I have to change OPTION=3 to OPTION=5, but do I have to edit each 11 pld file?

A1:
You were right about the speed limit:
you can change OPTION=3 to OPTION=4 or any other you need.
Speed_30kmh = 1;
Speed_35kmh = 2;
Speed_40kmh = 3;
Speed_50kmh = 4;
Speed_ECO = 5;
Speed_NoiseRed_OOS = 6;

For R models the line is different. ROADSPEEDLIMIT=3 change to ROADSPEEDLIMIT=5 or any other you need.

var RoadSpeedLimit_30 = “1”;
var RoadSpeedLimit_35 = “2”;
var RoadSpeedLimit_3840 = “3”;
var RoadSpeedLimit_40E = “4”;
var RoadSpeedLimit_50 = “5”;
var RoadSpeedLimit_50E = “6”;
var RoadSpeedLimit_55 = “7”;
var RoadSpeedLimit_60 = “8”;
var RoadSpeedLimit_60E = “9”;

After you change it, sometimes you still need to lift the speed manually through the display (depending on the tractor model)

You only need to reprogram transmission controller for that.
If you reprogrammed all of them, some settings might have went to default so you might get up to 5 fault codes that you need to configure with SA.

Q2:
Does it work with SA 4.2?
A2:

Service Advisor is just a tool to use pld. Pld editor works without SA.

Q3:
I have a question about trying to up the power of a 6330 to a 6430. If I compare the engine pld of both tractor they are identical (just the info in the bottom is different) So I don’t know how it could up the power if all the code is the same??

A3:
most pld files are made for various models, the info at the bottom determines which part of the pld file will be used for programming. For example:
PRODUCT_MODEL_NO=6115
PERFORMANCE_OPTION_PART_NO=R546973
FACTORY_OPTIONS=RE570443

Q4: Do you have John Deere PLD file editor for sale?

A4: Sorry, we don’t have PLD files. You can search or download from google.

How to Change John Deere Speed Limit with PLD File Editor

John Deere PayLoad (PLD) File Editor – this is Developer level tool, that allows you to change factory parameters in the PLD files using John Deere Service Advisor.

With John Deere PLD File Encryptor/Decryptor you can:

-Decrypt PayLoad (PLD) file to txt/ini format
-Modify PLD file expiration
-Modify PLD factory options such as speed limit (for example change 40 km/h to 50 km/h)
-Adjust PLD file to different product serial
-Encrypt PLD file
-Program controller with modified PLD using Service Advisor
-Support Windows XP

Example: How to change speed limit with pld files?

Q1:

Question about payload files:

I have pld files of my tractor (6330P) 11 in total.

I see in bottom of each files info about my tractor (option, serial number etc)

Question: My goal is up the speed limit from 40km to 50 km. I think I have to change OPTION=3 to OPTION=5, but do I have to edit each 11 pld file?

A1:
You were right about the speed limit:
you can change OPTION=3 to OPTION=4 or any other you need.
Speed_30kmh = 1;
Speed_35kmh = 2;
Speed_40kmh = 3;
Speed_50kmh = 4;
Speed_ECO = 5;
Speed_NoiseRed_OOS = 6;

For R models the line is different. ROADSPEEDLIMIT=3 change to ROADSPEEDLIMIT=5 or any other you need.

var RoadSpeedLimit_30 = “1”;
var RoadSpeedLimit_35 = “2”;
var RoadSpeedLimit_3840 = “3”;
var RoadSpeedLimit_40E = “4”;
var RoadSpeedLimit_50 = “5”;
var RoadSpeedLimit_50E = “6”;
var RoadSpeedLimit_55 = “7”;
var RoadSpeedLimit_60 = “8”;
var RoadSpeedLimit_60E = “9”;

After you change it, sometimes you still need to lift the speed manually through the display (depending on the tractor model)

You only need to reprogram transmission controller for that.
If you reprogrammed all of them, some settings might have went to default so you might get up to 5 fault codes that you need to configure with SA.

Q2:
Does it work with SA 4.2?
A2:

Service Advisor is just a tool to use pld. Pld editor works without SA.

Q3:
I have a question about trying to up the power of a 6330 to a 6430. If I compare the engine pld of both tractor they are identical (just the info in the bottom is different) So I don’t know how it could up the power if all the code is the same??

A3:
most pld files are made for various models, the info at the bottom determines which part of the pld file will be used for programming. For example:
PRODUCT_MODEL_NO=6115
PERFORMANCE_OPTION_PART_NO=R546973
FACTORY_OPTIONS=RE570443

Q4: Do you have John Deere PLD file editor for sale?

A4: Sorry, we don’t have PLD files. You can search or download from google.