Comparation Autel MaxiSys MS906 VS MS906TS VS MS906BT

MaxiSys MS906 VS MS906TS VS MS906BT have the same function, but also have many different as follow:

A:Function: MS906<MS906BT < MS906TS

B.MS906TS is added TPMS function based on MS906BT.

C.MS906 has the same apperance with MS906BT, But MS906BT has a few advantage than MS906:

1. MS906BT is installed Bluetooth, allowing diagnosis wirelessly.
2. MS906BT’s diagnostic coverage includes premium vehicle brands such as Maserati and Bentley, which would be required for high-end service shops.
3. MS906BT supports oscilloscope and digital inspection camera add-ons which are not supported by MS906.
4. Finally, MS906BT has the capability to perform coding for covered vehicles.

The MS906BT have all the capabilities of the maxisys mini ms905 as far as vehicle coverage and capabilities for codes, live data, actuation tests, adaptations and ECU coding .comparing the new MS906BT to the MS905 and they are similar in size but the MS906BT seems to have improvements such as faster processors, slightly larger screen, twice the battery capacity and better camera

MaxiSys MS906BT is the latest addition to the MaxiSys product line of advanced wireless diagnostic devices. The device is based on the Android operating system featured with the best possible coverage of OE-level diagnostics and ECU coding capability. Utilizing the powerful Exynos 5260 6-core processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15), an 8” capacitive HD touch screen, and long-distance wireless communication, the MaxiSys MS906BT efficiently provides comprehensive vehicle diagnostics and analysis.

How to update Nexiq firmware with John Deere SA

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

BMW ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C 2016.07 Engineers Version

BMW ICOM A2+B+C is upgrade of BMW ICOM, ICOM A2 is Second generation of BMW ISTA Diagnose and programming system. Support both new and old BMW vehicles.

BMW ICOM A2:
Software Version : 2016.07
ISTA/D (ISID /DiagnosticISTA-D 3.55.31 ISTA-P 3.59.0.600
VIN: 2016.06.15

BMW ICOM :
1. Support Multi-language: American English, British English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Japanese, Korean, Thai, Simplified Chinese and Traditional Chinese

2. Hardware Version: ICOM Application-01.40.05
3. Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
4. Support BMW All Series Diagnose and Programming

BMW ICOM A2+B+C Function:

* Interface A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols.
* Interface B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
* Interface C – 20-pin cable for old models.

BMW ICOM A2+B+C Special Features Compared with ICOM :
* The modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.Robust aluminium case will help to avoid damage when using in harsh environments.
* To protect the MOST connector, the ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.
* The ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the ICOM A2 and makes storage in the engine compartment easier.

FAQ of ICOM A2:

Q1: Is there any diagnostic equipment can do BMW530 DA 2003 ? It is better in French
A1: Try to use the BMW ICOM A2

Q2: Does the BMW ICOM A2 have the installation manual?
A2: Inset the hard disk into the computer and input password BMW, you’ll find the installation manual.

Q3: BMW ICOM A2 (SP168-B) can do the BMW old car before 2000?
A3: You can do the old BMW car, if the car can not be done, then try for a few more cars

Q4: 2013 New BMW ICOM A2 + B + C Diagnostic & Programming Tool (SP168-B) can be programmed to control template EGS?
A4: Yes The entire vehicle control unit can be programmed

How to update Piwis III V37.250.020

The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually the software updates 1-2 times per year.

Can Porsche Piwis III V37.250.020 perform all the functions of Porsche Piwis II?
Yes, Porsche Piwis III is compatible Porsche Piwis II, that means III includes all the functions of Piwis II.

Can Piwis II update to Porsche Piwis III V37.250.020?
No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Can I use my personal computer?
No, the computer and the device is bound together. Because The Piwis III V37.250.020 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will has no nonsense.

Why need Piwis III V37.250.020?
Because Piwis II can’t work with the Porsche after 2017 year. Only Piwis III V37.250.020 can .

It program IMMO & Key online?
Yes.

Does it support Wifi?
Usually, the device is offline version and WIFI is disabled so that you don’t need to active every 15 days.
If you have the online account and want to use our Vxdiag Piwis III on autonumen.com, then we can enable the Wifi and you will active the software every 15 days.

Can Piwis III connect to the internet?
Yes. It is allowed.

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

The old bluetooth cat et adatper iii has stopped production, and you can get the new WIFI CAT Caterpillar ET Diagnostic Tool adapter to replace it, Autonumen.COM has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.

WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

CAT Communications Adapter III 317-7485 would be the newest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is required for some CAT ET (Electronic Technician) functions.

Real 2015A Auto Scanner Tools Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI

This can be the only recommended communication device for Auto Repair Computer software CAT, as well as the only datalink device that may enable you to properly communicate with a CAT engine on dual datalinks.

Application version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Permits communication amongst service tools and engine controls utilizing numerous data links just like J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;

2. Flash program allows adapter firmware upgrades as more functions develop into available;

3. Makes use of J1939/11, high-speed information link (a part of ADEM III controls), substantially minimizing flash times;

4. Automatically selects J1939/11 when flashing the engine (reduces the flash time around 80%, from 14 minutes to 3 minutes).

For anyone who is interested in wireless diagnostic interface for cat engines, please you may decide on this new WIFI CAT Caterpillar ET Diagnostic Tool III adapter from www.autonumen.com , and also you will get 5% off discount in the event you order it now.