How to update Nexiq firmware with John Deere SA

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

How to update Nexiq firmware with John Deere SA

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

Mercedes Benz C5 Xentry

Mercedes Benz C5 Xentry connect with Wifi MB Star SD Connect C5 multiplexer support mercedes scn coding online and offline functions

Mercedes Benz C5 Xentry connect with Wifi update from MB Star SD Connect C4 Mux. Wifi MB Star SD Connect C5 multiplexer software update to V2017.5 Mercedes benz xentry das. Autonumen.com Mercedes Benz C5 Xentry connect with Wifi MB Star SD Connect C5 multiplexer support mercedes scn coding online and offline functions.

Wifi MB Star SD Connect C5 Mercedes Xentry Connect C5 Mux Benz Star diagnosis C5 multiplexer
c5 xentry connect

Mercedes Benz C5 Xentry connect with Wifi from Autonumen.com the newest and latest diagnostic tool for Mercedes Benz, it not only for cars, but also support trucks. the software version is 2016.07

Autonumen.com Wifi MB Star SD Connect C5 multiplexer Star Diagnosis support wireless diagnose, support multi-language such as English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Croatian Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese and more.

The Autonumen.com mb star c5 xentry connect support Offline and Online Programming, If You Want to Do Online, Please Buy This mercedes SCN Coding online Service. If want to do mercedes scn coding offline, you only need use the mercedes vediamo scn coding software, thanks.

For more details information, welcome to Add my Whatsapp (+86 15889512468) or Skype Autonumen.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

Autonumen.com- China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com

How to update Nexiq firmware with John Deere SA

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

How to update Nexiq firmware with John Deere SA

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community