Micropod 2 wiTech/DRB3 Tests on 1997-2018 Chrysler Dodge Jeep Fiat

Appear right here: clone Micropod II test reports
Computer software to test with: wiTech and DRB3 application
Vehicles to test: 1997-2018 Chrysler, Dodge, Jeep, Fiat
Functions to test: fundamental diagnostics, crucial programming, reflash programming, module flashing, ABS bleeding
Test reports from users: (thanks for all of the input)
2018 Jeep Wrangler:
FOBIK key programming completed!
Vehicle: 2018 JEEP WRANGLER three.5L V6 24V WT ENGINE UPG I W/ESS
2016 Chrysler, Dodge, Jeep, Fiat:
100% CAN – equipped coverage to 2016 for Chrysler, Dodge, Jeep, and Fiat automobile

Provide fundamental OBD2 vehicle diagnostics

Have access to module for Re-Flash Programming, TSBs, wiring diagrams, and repair information and facts.

Btw, wiTech ii supports chrysler and Fiat online programming, however
the package in the vendor comes without fiat application; i have my own
micro pod two fiat application to ensure that i can installation and
programming. )

2015 Grand Cherokee:
Grand Cherokee 2015 RFHUB modify CRC and VIN
It’s seriously very simple with micropod in offline mode . Just replace it …. and restor automobile config.

2015 Chrysler 200:
The 2015 Chrysler 200, together with other Fiat-based models like the
Jeep Renegade, Jeep Cherokee, and Ram Promaster, are all equipped with a
rolling PIN Code.
Managed to program fobik with wiTECH app, when the 200 lost all keys

2015 RAM:
I traded in my 2015 RAM for a 2017 and confirmed that the wmicropod
clone functions with wiTech 17.04 patch level 11 functions on my 2017
RAM.
I’ve heard rumblings that they changed issues for the 2018 MY – doubt they are going to function.

2015 WK 3.6L and 2015 DS 5.7L:
I connected it to my 2015 DS and my wife’s 2015 WK with no challenges. I
disabled the side view mirror tilt in reverse on her WK (only issue she
didn’t like about it) and she was thrilled. You’ll find functions to
bleed ABS, system tire sizes, etc. There are actually hundreds of sensor
readings, dozens of tests, actuators and misc functions that you can
perform that appear to become pretty car particular – which you would
anticipate. Every single switch/gadget in the vehicle appears to have a
corresponding sensor reading of some kind in the software program. The
only odd behavior I saw was when I connected for the ABS laptop or
computer of my DS… the EVIC freaked out and began screaming to service
the ABS. Perhaps that may be a safety feature of some type so people
don’t go driving even though messing with all the ABS computer? Powering
the car off and on once more made the ABS warning go away. I couldn’t
come across any “PROXI alignment” functions – maybe they do not apply to
my automobiles?

2014 dodge avenger:
One car i tested with: a 2014 dodge avenger …. just fine.
was able to flash a module update and plan a brand new essential with the unit.
try the emulator on: DRB III emulator confirmed operating.

2010 Charger:
I tested it on a 2010 Charger beneath witech and operates flawlessly

2006 Jeep Liberty:
2006 Jeep Liberty CRD Limited 4X4
I ordered a witech micropod 2 clone with drb3 functionality.
MicroPod II comes with version 17.04.27 software, drb3 support just
isn’t installed automatically but can nevertheless be found following
install. Says it’s great for offline use only, but that ought to be
sufficient to mess using the TPMS.
All modules except the BCM and ABS personal computer are still compatible together with the DRBIII on the 06’s.
This can be a operating offline Witech. I just got it connected
effectively. Software program V17.04.27 was installed on a Windows 7
laptop no trouble. It did effectively populate the VIN and can study the
ECU.

2004 Dodge:
got a 2004 Dodge pickup and beneath the emulator worked perfectly.

2003 PT Cruiser:
Basically no other modules other than the Engine, function. I cannot
connect towards the transmission, ABS, VTSS, SKIM, radio, cluster, and
so forth. But every little thing within the engine module may be tested,
actuated, etc.
Fortunately for me, I definitely only required the DRBIII to create the
Pinion element for manual transmissions, which is conveniently inside
the ‘engine’ part which operates.
Maybe I truly need to have to invest in an older VCI pod so that everything else operates.

Chrysler after 2003:
Micropod two with wiTECH only performs for Chrysler produced right after the year 2003

old Chysler 1997 – 2004 (2005):
Micropod two operate properly with DRBIII emulator for old Chysler the year 1997 – 2004 (2005)

Good to understand: When to work with DRB3 & when to work with wiTech?
The DRB3 emulator is aspect of Chrysler’s Witech computer software. The
Witech computer software supports two different pass-through devices,
The VCI pod which is sold together with the Witech system and the
Chrysler Starmobile. The DRB3 emulator is a convenience item for
dealerships to allow the use of their current witech scan-tool on older
non CAN bus autos. It isn’t by any means a cost saving option.

Attachment: Micropod two DRB 3 Emulator Car or truck List:
DRB three supports Chrysler, Jeep, and Dodge dealerships to service non-CAN primarily based cars from 1998-2007

How to Step by Step Install Cummins Insite 8.3 Pro with KG

Here is the Cummins Insite 8.3 that been going around with the KG. All here is for the purpose of education and help.

Cummins Insite 8.3 installation instruction:

Read the all the instructions and your clue is at the end. Please don’t ask me for the password for the zip files

1 install Cummins Insite 8.3

2 Rename primary Insite icon ” DOWNLOAD ICAL files only ”

3 Copy the Instie crack program to Desk and double click open it

4 Copy hwid from activator to keygen with

5 Put any user name you want

6 generate key place key and name in activator

7 run activator as admin
8 start icon should open up
9 hit start insite logo should show
10 when the activate licence window opens up click simulator mode
11 make sure internet is on for first activation
12 other time activate licence window open click simulator it will still work correct no active licence ever show but it will work like dealer lisenced pro. Password to open main zip file MmhaUuto!$theSh!t Password to open second zip ThankYouGhostman!!

Insite 8.3 Question and Answers:

Q: Heavy Duty Truck diagnostic Scanner Insite 8 installation was done perfectly without issue. But when trying to connect any ECU – Insite asks about license for connecting.

A: Don’t use original icon. Use loader and run as admin.

Q: This is version 8.3. error 50005

A: Uninstall everything including folder in c drive reinstall connect to internet the first timehit simulator and run as admin might even have to make exemption in antivirus. It works well but if you are running windows defender it can cause some communication issues I have found. For the best solution but not free solution contact zdssf

Q: I could install perfectly here, but I have a problem. When I do the download of calibration files they are found on the net, I click save but they do not save anywhere on the computer. Has anyone ever experienced this?
A: All the calibrations can be downloaded from:

https://www.cummins.com/parts-and-servic…ools/incal

Save them to the cal workspace folder and you have them all to rummage through as you need.
I have always found this to be much easier.

Q: works with nexiq usblink interface?
A: Yes. I run it with genuine nexiq 2 or inline 6 data link adapters.

Q: How to obtain the registration name for the keygen
A: Just put anything in there like you name. i just use my computer id. same as middle box.

watch it a few times and that is all it does. this works good when you are done. when it launches insite
use the the bottom button. once in simulator mode pick your data link.and connect. just like a licensed copy.

Cummins insite 8.3 reviews:
– Very good work.
– mine is still working and it’s been almost 2 months from OBD2TOOL
– been playing around with this.
seems to work ok. flashed a truck with it today with no problems
– If people can follow directions for activation it will work fine for them you can upgrade the fis with 8.4 and have a pretty a solid program it was a good share. For many people here because 7.6 was going by way of the dinosaur. Now the members here have a way to work on the new stuff.

LAUNCH X431 iCarScan OBD2 Code Reader Scanner

We are the wholesaler of car diagnostic tool and locksmith tools to
the worldwide from China. With more than six hard working years,
exprience to supply best after sales service for our best quality
product as following:
1. Vehicle/Truck diagnostic tool/Code Reader/ECU programmer
2. Car key programmer
3. ECU Chip Programmer
4. Mileage correction (Dash Board Programmer)
5. Vehicle Wheel balancer /Aligner/lift/Vehicle injector cleaner 6. Transponder keys/ Transponders/Remote keys
7. Professional Locksimth tools

Launch ICARSCAN Obd2 Scanner:
1. Multi-Language: English, Chinese, Spanish, French，Russian
2. Build-in bluetooth, easily connects with Android/ios smartphone
3. 10 free brand of software for your selection : You can free to
download any 10 software including car software and special functions.
If you need more other softwares, pls buy it from APP store.
4. Full systems and complete function dignosis for the most extensive coverage of OE-level diagnostics
5. Widest carline software coverage: Support proprietary protocols of over 70 car manufacturers and 2, 500 car models;
6. Support multiple special function software and actuation tests
incl.Oil / Service reset, ABS bleeding, IMMO & key programming,
throttle body adaptation, brake pads,steering angle reset,battery
matching, DPF regeneration,Injector coding
7. Intuitive interface and easy to use

Please pay attention:
You can free to choice any 10 software, including Car Softwares with
Special Functions. If you need more other softwares, pls buy it from APP
store. You have to select the softwares in 1 time.
for example:

ICARSCAN Knowledge is power PROTECTED AND RESERVE THE POWER OF YOUR CAR

The iCarScan VCI (vehicle communication interface) can turn your
Android/IOS smartphone into a professional automotive diagnosis tool.
Users can communication with automotive’s OBDII socket via BlueTooth
with an Android smartphone/ tablet, to achieve full systems and full
function diagnosis, include reading/ clearing trouble codes, data
stream, actuation test, adaptation, ECU coding & programming, oil
reset, other special function, etc.