PTFE guide belt advantages: 1. Good abrasion resistance, long lifetime.2. High structure strenght , certain degree elasticity.3. Without metallic contact of the sliding surfaces.4. Control the machine's vibration.5. Absorb the size's load.6. Enlarge the clearance of seal's extrusion.7. Simple groove design, and high load capacity.
Purpose: PTFE Guide Strip is an important component in a hydraulic cylinder where it stabilizes and reduces vertical movements of the rod. The arising side loads that the PTFE Guide Strip has to withstand can be significant, but the deformation of the Guide Strip is not permanent.
Material: PTFE + Bronze
Density: 2.1 - 2.3 g/cm³
Working Temperature: -180 ~ +250℃
Working Pressure: ≤63Mpa
Working Medium: Hydraulic Oil,Compressed Air
Material: PTFE + Bronze
Density: 2.1 - 2.3 g/cm³
Working Temperature: -180 ~ +250℃
Working Pressure: ≤63Mpa
Working Medium: Hydraulic Oil,Compressed Air
Advantages:
- * High abrasion resistance.
- * Low friction value.
- * Stick-slip free running.
- * Dimensionally stable and vibration absorbing.
- * High resistance against extrusion.
- * Low compression set.
- * Easy installation.
- * Excelent temperature resist bronze filled PTFE bearing guide strip