Machine Teflon Lining for Pipe and Fitting

Teflon PTFE lining high viscosity in the gel state (it does not truly melt) prevents it from being processed conventionally in extruders or injection molding. PTFE tubing is therefore dry molded or extruded in hydraulic extruders with (paste extrusion) or without (ram extrusion) lubricants. Paste extrusion of PTFE yields flexible tubing. However, it occurs in a batch process and thus long continuous lengths are limited to the batch size, unlike the melt-processible fluoropolymers FEP, PFA and ETFE.

PTFE is highly corrosion resistant and lined equipment is used to convey the most corrosive and toxic chemicals in manufacturing plants around the world. 

This PTFE lining Extruder is to extrude PTFE lining,It keeps stable ram speed and produces precise high quality PTFE liner products. with our original technology. The PTFE liner ram extruder series from Sunkoo is able to extrude tube which dia from 20- 150mm.

Advantages:

* Save time and money; * Advance designed; * High output; * Low energy consumption; * Long-life; * PC touch screen,extremely user-friendly operation; * The extrude PTFE tubes physical properties is stable and adjustable;

A PTFE liner, which is several millimetres thick, protects the stainless steel reactor efficiently against corrosion, even against such corrosive media as acids and alkali. PTFE is distinguished by its excellent resistance to almost all chemicals, which makes it possible to do without many expensive special alloys. This significantly reduces the acquisition costs. 

The risk of possible cross-contaminations is easier to control with PTFE liners. Metallic catalysers, such as Pt, Rh, Raney Nickel etc adhere to steel reactors and are very difficult to remove. In the following experiments the question keeps cropping up if the effects observed are really caused by the change of catalyser, contamination effects or catalyst poisoning. This problem is elegantly evaded by reserving a PTFE liner for each type of catalyser.

Source:https://www.sukoptfe.com/machine-teflon-lining-for-pipe-and-fitting

PTFE Ram Extrusion Line

A ram extruder is an extruder where, instead of extrusion screw, a ram or plunger is used . The ram extruder was the earliest extruder to be used in the plastics industry. This typical process is applied for producing profiles, sleeves, rod, block, tubing, lining sheet bars, etc. The ram extrusion process is very effective for specific materials like PTFE which are not extruded successfully using screw extruder.

In this process plastic material in powder form is gravity fed into a chamber. In the extrudating chamber the resin powder is heated on sintering temperature. Ultra high molecular weight polyethylene, becomes gelatinous as it melts so it can be extruded with this type of processes. A hydraulic ram pushes the resin materials like PTFE, UHMW, etc. from the chamber to the die. The die actually gives the shape of the desired plastic like a rod, tube or a profile shape with the requisite internal or outer diameter. When the material comes out of the die, it moves the length of the conveyor. The profiles can be manufactured endlessly and cut by the continuous extruding of each length.

Types of Machines:

There are two types of ram extrusions- the vertical ram extrusion and the horizontal ram extrusion. Whatever be the type of ram extrusion, the resin feed, compaction or performing, sintering and cooling are all the same. But the extrudates quality depends on various parameter like the design of the extruder, powder properties, extrusion rate, pressure and temperature.

PTFE Extrusion Equipment

PTFE & UHMWPE Rod Ram Extruder, PTFE Tube Ram Extruder, PTFE Semi-Automatic press molding machine, PTFE Full Automatic press molding machine, PTFE Gasket Machine ......

Jiangsu Sunkoo Machine Tech Co., Ltd is a leading Manufacturer and exporter of PTFE & UHMWPE machines having rich experience of more than 12 years in China.

 

Our first and foremost priority is the soundness of the product. We firmly believe that “The product offered must give the customer, not only what he expects, but true value, besides being an engineering marvel.” Sunkoo’s enormous strength comes from a wonderful combination of its highly efficient and professional management and a dedicated workforce of qualified and experienced engineers and technicians and marketing personnel, which in turn, leads to world-class manufacturing, testing and R & D , besides meeting requirements of clients’ specifications globally.

 

Each and every component of our products is manufactured under strict supervision of our highly qualified, technically trained and experienced engineers. Our products reflect Sunkoo’s assurance of quality. State-of-the-art technology, latest machinery and continuous research and development are the key elements of our success.

 

Main Machines: PTFE & UHMWPE Rod Ram Extruder, PTFE Tube Ram Extruder, PTFE Semi-Automatic press molding machine, PTFE Full Automatic molding machine, PTFE Gasket Machine ......

 

PTFE Rod Extruder Features:Save time and money; PLC design and easy to operate;Long time span. No heating effect during operation;With latest technology and optimized design;Min - Max Dia:4-500mm;Production Per Hour:  7-10+ kg/h;Automatic operation.

 

PTFE Tube Extruder Features:Vertical Ram Extruder for PTFE tube;Ram extruding machine for PTFE tube;Using for Pre-sintering PTFE material;Suit for new PTFE material or Recycle PTFE material;Rangeof diameter PTFE Extrusion 20-600 mm, Heating zones 5 zones;Automatic

 

Source:https://www.sukoptfe.com/ptfe-extrusion-equipment

PTFE Virgin Rod

PTFE Virgin Rod Features:Usage temperature range is very broad (Celsius from - 200 degrees to +260 degrees); Anti-majority chemical substance's corrosiveness, except some fluorides and alkalinity moltenmetal;Excellent mechanical properties, aging resistance;Excellent flame resistance(Conforms to ASTM-D635 and D470 test step),in the air to be regulated as a flame retardant material;Very low water absorption......

One key importantadvantage of PTFE Rod is its operating temperature range,it can easily outperform other engineering plastics by being able to perform continuously at-250°C, right up to an amazing 250°C. Another important advantage of PTFE Rod is its outstanding co-efficient of friction, PTFE is in the record books ashaving one of the lowest friction values known to man. PTFE also has excellentacid and chemical resistance. Another feature of PTFE is its ability to set byor due to compression.

PTFE has excellent electrical resistance. PTFE is alsowater repellent and is often used in the manufacture of modern high performing,water repellent and breathable clothing.

PTFE is excellentfor low friction bearings, bushes, rollers and pulleys. PTFE is also almostexclusively used in cryogenic components due to its ultra low operating temperatures.PTFE Rod is regularly used for seals. PTFE Rod has become a very important engineering plastic used within the aerospace industry and aeronautics.

PTFE isoften used within the food industry companies. Another useful application overthe years has been in the use of product or component handles due to its resistance to heat and heat transfer. When an application for electrical resistance becomes too high for other materials, PTFE Rod can fill a very important gap.

Because PTFE hassuch a low co-efficient of friction it offers a material that when used willreduce load and drag in bearings to improve efficiency and reduce frictional losses and PTFE will outlast other materials. Because PTFE Rod will set due to compression, PTFE seals will conform to mating components resulting inexcellent sealing capacity. PTFE is reasonably easy to machine which helps withreduced machining costs and increased capacity and efficiency. PTFE isresistant to most acids allowing this material to be used in aggressive environments to where such materials as Polypropylene are unsatisfactory. 

Source:https://www.sukoptfe.com/ptfe-virgin-rod

Sintering Furnace Oven

"Jiangsu Sunkoo Machine Tech Co., Ltd " is a dynamic and innovative organization  for Manufacturing the PTFE Sintering Furnace Oven equipment. The product range covers various type of water PTFE oven include electrical and natural gas types for PTFE Gaskets, PTFE Moulded Rods, PTFE Moulded Tubes, PTFE Bushes etc. All the oven can be customized upon the customer choice.

Main Products:Sintering Furnace For Gaskets,Sintering Furnace For Moulded Rods/Tubes,Natural Gas PTFE Furnace Oven

PTFE Industrial Nitrogen Sintering Furnace.Capable of paperless recording and group-unrestricted programming. Its sintering records can last one year. The multiple sintering furnaces can be operated at the same time and the remote control is available.

PTFE sintering furnace Specifications:1、coating sintering furnace;2、steel-made furnace;3、anycurve, aircycling furnace; 4、program-controlled; 5、ISO9001 certificate;

Gas Furnace Oven Features: Internal air circulation for good temperature distribution;Excess temperature cut-off;Control equipment electrically interlocked; Heavy duty construction;Single owing type comprising a door front of heavy gauge steel;Provided air inlet and exhaust system;Provided open type strip heater for required heating load;Composite blanket insulation;Separate control panel board;PLC display is available.

PTFE Sintering Furnace Features (Rods/Tubes/Gaskets):

Sunkoo sintering Furnace deliver tight temperature control and temperature uniformity throughout the heated chamber providing an efficient and consistent sintering process from cycle to cycle. These ovens are commonly used in applications requiring a material to be formed without melting, such as: sintering a PTFE molded rods, sheets tubes etc.

1,  It is mainly used to definite form under designated temperature after sintering completion of PTFE products, Technological requirements are not subject to limitations. 

2,  Special pipelines are installed at the air outlet to vent waste air along preinstalled pipelines without polluting workshop and environment. 

3,  The configuration of energy-saving heating components has characteristics of fast heating, electricity-saving and long application life. 

4,  By adopting hot air circulating principle, high rotating speed multi blade circular blower can diffuse hot air evenly with high wind rate. 

5,   Hearth liner and turn plate are made of stainless steel material with steady rotation, stable forming and high rate of finished products.

Source:https://www.sukoptfe.com/sintering-furnace-oven