HP0-236試験 気楽に一発合格すること killtestは保証できます！

killtestはHP0-236テストの練習問題、過去問題を提供、さらに試験問題集までを提供するのは可能です、弊社のHP Certification III資格認証はIT関係模擬試験用ソフトへの開発及び最高品質の模擬試験問題集の作成に取組んでおります。
情報技術は挑戦と競争を満たす現代商業会社にとって、重要な意義が持ってます。IT従業員として、残酷な仕事競争の中で絶え ず変化する環境と高水準の業界要求に直面する上にお客さんのために安定と信頼できる経済的なITサービスを提供します。HP Certification IIIは一つの世界的な独立IT試験認証機構です、目的はその独立の試験と認証体系を通して全世界IT領域の品質とIT業就職する質量 を確保するのです。

HP0-236
1.What should be the maximum number of active storage controller ports per inter-switch link in a
high throughput computing environment?
A.2
B.4
C.10
D.20
Correct:D
2.Which factor can reduce the performance between devices in a Fibre Channel SAN?
A.hop count
B.switch latency
C.inter-switch link latency
D.inter-switch link congestion
Correct:D
3.Which ports should you use on a B-series switch to establish two Wavelength Division
Multiplexing links to a remote site?
A.ports which belong to the same "Quad"
B.ports which belong to different "Quads"
C.ports on different switches
D.only 2 Gbps ports
Correct:B
4.What do you recommend if a performance bottleneck is discovered on a link between a 1 Gbps
and a 2 Gbps B-series switch?
A.Implement trunking on this link.
B.Implement port channeling on this link.
C.Use multi-mode cable instead of single mode.
D.Replace the 1 Gbps switch with a 2 Gbps switch.
Correct:D
5.A complex SAN designed for applications with small IOs is used primarily by applications with
large IOs. What is the impact to the SAN?
A.The supported hop count is reduced.
B.There may be congestion on inter-switch links.
C.None. SAN design is not dependent on application IO size.
D.The buffer-to-buffer credit on the storage system must be recalculated.
Correct:B

HP HP Certification III HP0-A17テスト 気楽に試験を合格

killtestのHP0-A17試験問題集はHP Certification III資格認証のテストの重要な試験の一つになっています、HP Certification III 資格認証を取りたいならば、killtestはその認証の最も最新テスト練習問題集を提供し、正確率も高いし、一発合格するも保証できます。
killtestのIT資格試験の模擬問題をWebベースで学習できる、IT自分戦略研究所の新サービス「IT資格攻略」では、HP 関連の資格をテーマとして取り上げています。HP Certification III基礎 I、HP Certification III も近日中に追加予定です。

HP0-A17
1.Which tool can be used to force a reboot of a SWAN/SWAN 2 CLIP?
A.WANDUMP
B.WANFBT
C.WANLNCK
D.WANTCB
Correct:B
2.Which components can you install on the system console using the OSM Installer DVD ? (Select
two.)
A.Event Viewer
B.Low Level Link
C.Notification Director
D.Service Connection
Correct:B C
3.When replacing a PMF, within how much time must the power cable be reconnected?
A.15 seconds
B.20 seconds
C.25 seconds
D.30 seconds
Correct:C
4.What is used to replace a SWAN/SWAN2 concentrator?
A.WAN Wizard PRO
B.Guided Procedures
C.SCF
D.SP Tool
Correct:C
5.The SP Tool has identified a faulty X fabric cable between enclosure 1 and enclosure 3. Which
connector on the SEB in enclosure 1 is affected?
A.1
B.2
C.3
D.4
Correct:B
6.Using the HP suggested naming convention, identify the G4SA group, module, slot and port
number of LIF L112E.
A.GRP-11, MOD-2, SLOT-2, PORT-E
B.GRP-112, MOD-2, SLOT-2, PORT-E
C.GRP-11, MOD-2,SLOT-2, PORT-A
D.GRP-112, MOD-2, SLOT-2, PORT-A
Correct:C
7.Which action is required before replacing an X Fabric fiber-optic cable between MSEB and
Switch-to-Node ports?
A.Verify that internal Y fabric for all other nodes are fully operational.
B.Verify that external Y fabric for all other nodes are fully operational.
C.Verify that both internal and external Y fabric for all other nodes are fully operational.
D.Verify that both external X and Y fabric for all other nodes are fully operational.
Correct:C
8.Which preventive maintenance tasks are performed on an S-series server? (Select two.)
A.testing the fiber optic cables
B.cleaning tape drives regularly
C.running diagnostics on all devices
D.dusting or cleaning enclosures as needed
E.running traces on all communication lines
Correct:B D
9.To display all of the Fiber Channel Disks installed on the system along with their path states,
what step(s) must be taken from the OSM Service Connection?
A.Click the Logical Status icon, logon using the pop-up window, and then click on the FC Disk resource
type.
B.Click the Display icon and then choose the Attributes menu selection.
C.Click the Summary icon and then choose the Connection Status menu selection.
D.Click the Tools icon and then choose the Physical Configuration Tool menu selection.
Correct:A
10.To view the entire hardware inventory of the system, what steps must be taken?
A.Select the system item in the hierarchical view, and then use the display Menu attributes item.
B.Right-click on the system item in the hierarchical view, and then select the httributes sub-menu item.
C.Double-click on the system item in the hierarchical view.
D.Select the system item in the hierarchical view, and then change the view from physical to nventory.
Correct:D