Killtestは自分の製品に対して自信があり、それにKilltestは常に認定試験の情報に関心を持っています。KilltestのHP0-205問題集は一年で進級することに提供できます。
killtestはIT技術者に向きの試験模擬問題集を提供しています。少なくとも一万人ほど弊社の問題集を使ったことがあり、ほとんど試験が合格できました。その以外は、問題と解答を提供して、理解しやすいです。killtest過去問は単項の選択問題、多肢選択問題、ドラッグ＆ドロップ、実験問題及び穴埋め問題などの試験フォームを含みます。
killtestの練習問題の目標はお客様のニーズを最優先と考え、その信頼を得るために、日々努力しています。killtest全攻略問題集はpdfフォームは一番人気な形式でポイントできて、ソフト版は実際の試験雰囲気を模擬したものです 。
HP0-205
1.You are at a customer site to repair an EML E-Series tape library. What is the first thing to
consider before replacing any defective parts?
A.the part replacement procedure
B.how the fault was caused
C.customer site procedures
D.firmware revision levels
Correct:C
2.Which EML E-Series tape library FRU has a Command Line Interface port?
A.interface controller card
B.robotics controller card
C.Interface Manager memory card
D.Interface Manager card
Correct:D
3.Which HP software can be used to calculate the actual compression ratio of backup data?
A.Performance Analysis Tool
B.Library and Tape Tools
C.I/OMETER
D.DPMETERM
Correct:B
4.What is the most critical factor affecting performance at the disk subsystem during a backup?
A.disk connection speed
B.disk fragmentation
C.tape feed speed
D.compression ratio
Correct:B
5.An EML E-Series tape library is powered on. Before opening the library front door, _____.
A.operable robotics must be parked
B.the library must be powered off
C.the Operator Control Panel must indicate "service request"
D.cartridges must be removed from the load ports
Correct:A
6.Excessive R/W-head wear due to tape repositioning is a result of not providing the correct ____.
A.feed speed
B.block size
C.file size
D.compression ratio
Correct:A
7.Which component of the EML E-Series tape library is located in the top cPCI slot in the library
base module card cage?
A.Interface Manager memory
B.robotics controller
C.interface controller
D.Interface Manager
Correct:B
8.Compared to an Ultrium 460 tape drive, the transfer rate for native data of an Ultrium 960 drive is
____.
A.slightly lower
B.approximately the same
C.approximately 2 times higher
D.more than 2.5 times higher
Correct:D
9.Which option of Command View TL is used to collect configuration information and execute a
Device Analysis test on the selected device or devices for an EML E-Series tape library?
A.backup configuration
B.get config
C.report event logs
D.generate support ticket
Correct:D
10.Which file factor does NOT affect performance of tape devices in a SAN environment?
A.extension
B.compressibility
C.directory depth
D.size (larger is better)
Correct:A
killtestはIT技術者に向きの試験模擬問題集を提供しています。少なくとも一万人ほど弊社の問題集を使ったことがあり、ほとんど試験が合格できました。その以外は、問題と解答を提供して、理解しやすいです。killtest過去問は単項の選択問題、多肢選択問題、ドラッグ＆ドロップ、実験問題及び穴埋め問題などの試験フォームを含みます。
killtestの練習問題の目標はお客様のニーズを最優先と考え、その信頼を得るために、日々努力しています。killtest全攻略問題集はpdfフォームは一番人気な形式でポイントできて、ソフト版は実際の試験雰囲気を模擬したものです 。
HP0-205
1.You are at a customer site to repair an EML E-Series tape library. What is the first thing to
consider before replacing any defective parts?
A.the part replacement procedure
B.how the fault was caused
C.customer site procedures
D.firmware revision levels
Correct:C
2.Which EML E-Series tape library FRU has a Command Line Interface port?
A.interface controller card
B.robotics controller card
C.Interface Manager memory card
D.Interface Manager card
Correct:D
3.Which HP software can be used to calculate the actual compression ratio of backup data?
A.Performance Analysis Tool
B.Library and Tape Tools
C.I/OMETER
D.DPMETERM
Correct:B
4.What is the most critical factor affecting performance at the disk subsystem during a backup?
A.disk connection speed
B.disk fragmentation
C.tape feed speed
D.compression ratio
Correct:B
5.An EML E-Series tape library is powered on. Before opening the library front door, _____.
A.operable robotics must be parked
B.the library must be powered off
C.the Operator Control Panel must indicate "service request"
D.cartridges must be removed from the load ports
Correct:A
6.Excessive R/W-head wear due to tape repositioning is a result of not providing the correct ____.
A.feed speed
B.block size
C.file size
D.compression ratio
Correct:A
7.Which component of the EML E-Series tape library is located in the top cPCI slot in the library
base module card cage?
A.Interface Manager memory
B.robotics controller
C.interface controller
D.Interface Manager
Correct:B
8.Compared to an Ultrium 460 tape drive, the transfer rate for native data of an Ultrium 960 drive is
____.
A.slightly lower
B.approximately the same
C.approximately 2 times higher
D.more than 2.5 times higher
Correct:D
9.Which option of Command View TL is used to collect configuration information and execute a
Device Analysis test on the selected device or devices for an EML E-Series tape library?
A.backup configuration
B.get config
C.report event logs
D.generate support ticket
Correct:D
10.Which file factor does NOT affect performance of tape devices in a SAN environment?
A.extension
B.compressibility
C.directory depth
D.size (larger is better)
Correct:A