killtestは新旧客に感謝するために、春の激安キャンペーンを行い、多くの製品は2900JPYで変えることになっています、killtestのIT資格試験の模擬問題をWebベースで学習できる、IT自分戦略研究所の新サービス「IT資格攻略」では、HP 関連の資格をテーマとして取り上げています。HP Certification I 基礎HP0-803問題集も近日中に追加予定です.それども弊社は一発合格することは保証いたします。さらに、何とかして、このすごさをお伝えさせて頂きたい！！
全額返金キャンペンも実施いたします。
体験したい時に無料でいつでもオンラインでアクセスすることが出来るので、忙しい IT エンジニアの皆さまのトレーニング教材に最適です.
HP0-803
Implementing MSA Storage Solutions
1.Which operating system is supported in an MSA1000 SAN configuration with an FCA2210 host
bus adapter (HBA)?
A.Linux
B.HP-UX
C.Windows 2000
D.Novell NetWare
Correct:D
2.Which two hot plug components are interchangeable between the MSA1500 cs and the MSA20?
(Choose two.)
A.fans
B.SCSI module
C.power supplies
D.Fibre Channel I/O module
Correct:A C
3.How is the FCA2101 BIOS Utility entered to set up the host bus adapter (HBA) to perform a
remote boot?
A.F10 after the server is rebooted
B.Alt+E after the server is rebooted
C.SmartStart is booted from the CD.
D.Array Diagnostic Utility is booted from the CD.
Correct:B
4.A customer wants to implement an MSA1000 solution with no single point of failure (NSPOF).
The solution includes 1 MSA1000, 2-Node W2K Cluster, 2-Node NetWare Cluster. Which host bus
adapters (HBAs) are needed to implement this solution?
A.two FCA2404 and two FCA2210
B.two FCA2404 and two FCA2214
C.four FCA2404 and four FCA2210
D.four FCA2404 and four FCA2224
Correct:C
5.You are attaching MSA30 enclosures to an MSA1500 cs with all SCSI modules installed. On
which bus and port should they be attached?
A.bus 0 port A, bus 1 port A, bus 2 port A and bus 3 port A
B.bus 0 port A, bus 1 port B, bus 2 port A and bus 3 port B
C.bus 0 port B, bus 1 port A, bus 2 port B and bus 3 port A
D.bus 0 port B, bus 1 port B, bus 2 port B and bus 3 port B
Correct:A
6.An MSA1000 is powered on with both controllers inserted, but different firmware on each. Which
firmware is used?
A.the older firmware version
B.the newer firmware version
C.Neither is used. The MSA1000 will not boot.
D.The MSA1000 will request firmware reinstallation for both controllers.
Correct:B
7.A customer has a no single point of failure (NSPOF) Linux Cluster attached to an MSA1000 with
controllers. What is required to add an additional server running Windows to this
configuration?
A.External switches must be used.
B.Secure Path for Windows must be installed.
C.Linux is allowed to coexist with NetWare only.
D.A single node Microsoft Cluster Service must be configured.
Correct:B
8.Which three additional components are needed for a non-redundant MSA1500 cs subsystem to
be fully redundant? (Choose three.)
A.Secure Path
B.power supply
C.MSA1000 controller
D.256 MB Cache Module
E.Fibre Channel I/O Module
Correct:A C E
9.What is the maximum number of physical drives supported with the MSA1500 cs using MSA30
enclosures?
A.36
B.42
C.56
D.66
E.96
Correct:C
10.How many total device-side SCSI buses are there in the MSA1500 cs controller when attached
to the MSA20 enclosures?
A.2
B.4
C.6
D.8
Correct:D
11.What is the maximum number of logical drives supported with the MSA1000?
A.24
B.32
C.42
D.48
Correct:B
12.The StorageWorks 2 Gb/s Small Form Factor Pluggable (SFP) Short Wave Transceivers support
distances up to _____ using multimode fiber-optic cable.
A.100m at 2 Gb/s and 300m at 1 Gb/s
B.10 km at 2 Gb/s and 500m at 1 Gb/s
C.300m at 2 Gb/s and 500m at 1 Gb/s
D.500m at 2 Gb/s and 300m at 1 Gb/s
Correct:C
13.What are three purposes of the EMU I/O port module in the MSA1000? (Choose three.)
A.provides drive status indicators
B.controls inter-controller internal communication
C.monitors temperatures, power supplies and blowers
D.provides expansion ports for external SCSI enclosures
E.provides expansion ports for both SCSI and SATA enclosures
Correct:A C D
14.When configuring logical drives, which three steps must be taken during an MSA1500
installation? (Choose three.)
A.make sure all fibre cables are not yet connected
B.verify cache batteries are fully charged before assigning any logical drive
C.identify the operating system of each host bus adapter (HBA) with access to the storage
D.verify that each host bus adapter (HBA) in each server has been granted access to the storage
E.control access to the storage by indicating which host bus adapter (HBA) can access which LUN
Correct:C D E
15.A customer installs a new MSA1000 subsystem and downloads and installs the FCA2214
QLogic driver from the QLogic website. The customer now has difficulty seeing the drives. What
does the customer need to do?
A.reboot the server after installing the driver
B.reboot the MSA1000 after installing the driver
C.FCA2214 is not supported with MSA1000 subsystem.
D.install the driver for the FCA2214 from the MSA Support CD
Correct:D
全額返金キャンペンも実施いたします。
体験したい時に無料でいつでもオンラインでアクセスすることが出来るので、忙しい IT エンジニアの皆さまのトレーニング教材に最適です.
HP0-803
Implementing MSA Storage Solutions
1.Which operating system is supported in an MSA1000 SAN configuration with an FCA2210 host
bus adapter (HBA)?
A.Linux
B.HP-UX
C.Windows 2000
D.Novell NetWare
Correct:D
2.Which two hot plug components are interchangeable between the MSA1500 cs and the MSA20?
(Choose two.)
A.fans
B.SCSI module
C.power supplies
D.Fibre Channel I/O module
Correct:A C
3.How is the FCA2101 BIOS Utility entered to set up the host bus adapter (HBA) to perform a
remote boot?
A.F10 after the server is rebooted
B.Alt+E after the server is rebooted
C.SmartStart is booted from the CD.
D.Array Diagnostic Utility is booted from the CD.
Correct:B
4.A customer wants to implement an MSA1000 solution with no single point of failure (NSPOF).
The solution includes 1 MSA1000, 2-Node W2K Cluster, 2-Node NetWare Cluster. Which host bus
adapters (HBAs) are needed to implement this solution?
A.two FCA2404 and two FCA2210
B.two FCA2404 and two FCA2214
C.four FCA2404 and four FCA2210
D.four FCA2404 and four FCA2224
Correct:C
5.You are attaching MSA30 enclosures to an MSA1500 cs with all SCSI modules installed. On
which bus and port should they be attached?
A.bus 0 port A, bus 1 port A, bus 2 port A and bus 3 port A
B.bus 0 port A, bus 1 port B, bus 2 port A and bus 3 port B
C.bus 0 port B, bus 1 port A, bus 2 port B and bus 3 port A
D.bus 0 port B, bus 1 port B, bus 2 port B and bus 3 port B
Correct:A
6.An MSA1000 is powered on with both controllers inserted, but different firmware on each. Which
firmware is used?
A.the older firmware version
B.the newer firmware version
C.Neither is used. The MSA1000 will not boot.
D.The MSA1000 will request firmware reinstallation for both controllers.
Correct:B
7.A customer has a no single point of failure (NSPOF) Linux Cluster attached to an MSA1000 with
controllers. What is required to add an additional server running Windows to this
configuration?
A.External switches must be used.
B.Secure Path for Windows must be installed.
C.Linux is allowed to coexist with NetWare only.
D.A single node Microsoft Cluster Service must be configured.
Correct:B
8.Which three additional components are needed for a non-redundant MSA1500 cs subsystem to
be fully redundant? (Choose three.)
A.Secure Path
B.power supply
C.MSA1000 controller
D.256 MB Cache Module
E.Fibre Channel I/O Module
Correct:A C E
9.What is the maximum number of physical drives supported with the MSA1500 cs using MSA30
enclosures?
A.36
B.42
C.56
D.66
E.96
Correct:C
10.How many total device-side SCSI buses are there in the MSA1500 cs controller when attached
to the MSA20 enclosures?
A.2
B.4
C.6
D.8
Correct:D
11.What is the maximum number of logical drives supported with the MSA1000?
A.24
B.32
C.42
D.48
Correct:B
12.The StorageWorks 2 Gb/s Small Form Factor Pluggable (SFP) Short Wave Transceivers support
distances up to _____ using multimode fiber-optic cable.
A.100m at 2 Gb/s and 300m at 1 Gb/s
B.10 km at 2 Gb/s and 500m at 1 Gb/s
C.300m at 2 Gb/s and 500m at 1 Gb/s
D.500m at 2 Gb/s and 300m at 1 Gb/s
Correct:C
13.What are three purposes of the EMU I/O port module in the MSA1000? (Choose three.)
A.provides drive status indicators
B.controls inter-controller internal communication
C.monitors temperatures, power supplies and blowers
D.provides expansion ports for external SCSI enclosures
E.provides expansion ports for both SCSI and SATA enclosures
Correct:A C D
14.When configuring logical drives, which three steps must be taken during an MSA1500
installation? (Choose three.)
A.make sure all fibre cables are not yet connected
B.verify cache batteries are fully charged before assigning any logical drive
C.identify the operating system of each host bus adapter (HBA) with access to the storage
D.verify that each host bus adapter (HBA) in each server has been granted access to the storage
E.control access to the storage by indicating which host bus adapter (HBA) can access which LUN
Correct:C D E
15.A customer installs a new MSA1000 subsystem and downloads and installs the FCA2214
QLogic driver from the QLogic website. The customer now has difficulty seeing the drives. What
does the customer need to do?
A.reboot the server after installing the driver
B.reboot the MSA1000 after installing the driver
C.FCA2214 is not supported with MSA1000 subsystem.
D.install the driver for the FCA2214 from the MSA Support CD
Correct:D