もう春になるんですが、新のIT資格認証を手に入りたいでしょうか？killtestは提供しており、killtestは受験者のために春の特価キャンペーンを行うことになってます、多くの問題集は29USDだけで買えます、お客様にとって絶好のチャンスだと思います、
HP Certification I 認証のHP0-Y18問題集は\ 9900.00 JPY だけで購入し可能です。弊社のHP0-Y18問題集は権威的なIT専門家とエンジニアが作りあがった作品ですので、正確率は100％あります、それども一発合格することは保証できます。
HP0-Y18
1. What is the default management username and password on the ProCurve AP 530?
A. The username is admin, and the password is admin.
B. The username is admin, and the password is procurve.
C. The username is manager, and the password is procurve.
D. The username is admin, and there is no default password.
Answer: A
2. Which security option was part of the original 802. 11 standard?
A. 802. 1X
B. Shared-key WEP
C. Dynamic Wired Equivalent Privacy (WEP)
D. Wi-Fi Protected Access with preshared keys (WPA-PSK)
Answer: B
3. When can a station no longer communicate with an AP?
A. when the received signal falls below 0 dBm
B. when the received signal falls below the background noise
C. when the received signal falls below the station's receiver sensitivity
D. when the received signal falls below the fade margin for the wireless cell
Answer: C
4. What does the slot time determine?
A. the number of seconds the AP waits between sending beacons
B. the length of time the station waits between detecting a transmission and sending a frame
C. the beginning of the 802. 11 frame, which enables the AP and the station to synchronize their
transmissions
D. how long the station can "sleep" before it must become active and check the AP to see if there are any
transmissions waiting for it
Answer: B
5. You want ProCurve Radio Port (RP) 1's radio to function as a neighbor for RP 2's radio.RP 1 will
monitor RP 2 and take action if RP 2 becomes unavailable.You configure RP 1's radio to take which
action if RP 2 becomes unavailable? (Select two. )
A. Open its data rates.
B. Change the radio's channel.
C. Increase the radio's transmit power.
D. Order stations associated with RP 2 to roam.
E. Change the radio mode from 802. 11a to 802. 11b/g.
Answer: AC
6. The ProCurve Mobility Manager (PMM) site-planning tool provides an Auto Placement tool.What does
this tool take into account as it places devices on the floor plan?
A. the existing RF interference
B. the obstacles that you have defined
C. other devices already placed on the floor plan
D. the floor plan dimensions and desired capacity
Answer: D
7. Wireless networks present certain challenges.Which wireless network challenge does ProCurve
Mobility Infrastructure Solutions help you address?
A. Users are less productive when using a wireless connection.
B. 802. 11 standards do not provide any guidelines for Layer 2 roaming.
C. 802. 11 standards do not provide any encryption, so you must create VPN tunnels to each end station.
D. Multiple users connect to the network through the same AP, but access must be authorized for each
user.
Answer: D
HP Certification I 認証のHP0-Y18問題集は\ 9900.00 JPY だけで購入し可能です。弊社のHP0-Y18問題集は権威的なIT専門家とエンジニアが作りあがった作品ですので、正確率は100％あります、それども一発合格することは保証できます。
HP0-Y18
1. What is the default management username and password on the ProCurve AP 530?
A. The username is admin, and the password is admin.
B. The username is admin, and the password is procurve.
C. The username is manager, and the password is procurve.
D. The username is admin, and there is no default password.
Answer: A
2. Which security option was part of the original 802. 11 standard?
A. 802. 1X
B. Shared-key WEP
C. Dynamic Wired Equivalent Privacy (WEP)
D. Wi-Fi Protected Access with preshared keys (WPA-PSK)
Answer: B
3. When can a station no longer communicate with an AP?
A. when the received signal falls below 0 dBm
B. when the received signal falls below the background noise
C. when the received signal falls below the station's receiver sensitivity
D. when the received signal falls below the fade margin for the wireless cell
Answer: C
4. What does the slot time determine?
A. the number of seconds the AP waits between sending beacons
B. the length of time the station waits between detecting a transmission and sending a frame
C. the beginning of the 802. 11 frame, which enables the AP and the station to synchronize their
transmissions
D. how long the station can "sleep" before it must become active and check the AP to see if there are any
transmissions waiting for it
Answer: B
5. You want ProCurve Radio Port (RP) 1's radio to function as a neighbor for RP 2's radio.RP 1 will
monitor RP 2 and take action if RP 2 becomes unavailable.You configure RP 1's radio to take which
action if RP 2 becomes unavailable? (Select two. )
A. Open its data rates.
B. Change the radio's channel.
C. Increase the radio's transmit power.
D. Order stations associated with RP 2 to roam.
E. Change the radio mode from 802. 11a to 802. 11b/g.
Answer: AC
6. The ProCurve Mobility Manager (PMM) site-planning tool provides an Auto Placement tool.What does
this tool take into account as it places devices on the floor plan?
A. the existing RF interference
B. the obstacles that you have defined
C. other devices already placed on the floor plan
D. the floor plan dimensions and desired capacity
Answer: D
7. Wireless networks present certain challenges.Which wireless network challenge does ProCurve
Mobility Infrastructure Solutions help you address?
A. Users are less productive when using a wireless connection.
B. 802. 11 standards do not provide any guidelines for Layer 2 roaming.
C. 802. 11 standards do not provide any encryption, so you must create VPN tunnels to each end station.
D. Multiple users connect to the network through the same AP, but access must be authorized for each
user.
Answer: D