Remodeling slot machine to the amusement specification by reusing the electronic IC board.
日本語サイト
Our customers depend on us to remodel the slot machine to the amusement specification. Furthermore, they wanted to reuse the electronic IC board which they stocked. At first, we removed the electronic IC board. This mission was never easy. The wiring had to remove one by one carefully and recorded in the notebook because the IC board has the necessity to wiring to the new slot machine again. It is as if to trans move and reconstruct the old traditional residence located at Takayama in Hida to the Roppongi in Tokyo.
Every pillar and crossbeam should have been numbering to construct again. The new slot machine has four medal sensors. We have to send the signal the same wave style as the medal in. We made the microcomputer program and put it on the electronic circuit. It was wired between the medal selector and the slot machine. Furthermore, The medal payout signal also should match the same as the medal payout from the hopper. All signals have match up and all wiring has done. Our mission has been finished completely
![](https://blogimg.goo.ne.jp/user_image/4e/41/30190946353c2bc71740b75d324f3aa8.jpg)
回胴式遊戯機技術研究会はパチスロの入出力信号を調べて、オシロスコープで波形をみて、その通りの疑似信号を出力するマイコンプログラムを作成して、回路にのせて、パチスロのメダル不要回路を作成して、卒業の技術講習(有料)を開講しています。
この機会に、パチスロの基礎から学んで、アミューズメント仕様パチスロの技術を身につけてみませんか?
受講受付中!!
ご不明の点はご遠慮なくお尋ね下さい。存じ上げていることは丁寧にご案内させていただきます。
![](https://blogimg.goo.ne.jp/user_image/5f/c6/5269333fb847c30d62024de645af6a19.jpg)
※コメント投稿者のブログIDはブログ作成者のみに通知されます