10 Concept Streetlights Powered by Renewable Energy

 

Energy is a very important product to sustain the development. The energy sources are therefore explored all around the world in order to meet the energy demands, created by innumerable needs of the mankind. But most of the energy sources which are available today are non-renewable as they get exhausted to never occur again. Coal, petrol and other fossil fuels are some examples. Therefore alternatives are being explored by researchers, engineers and scientists world wide in order to search or create alternatives which can work using non renewable sources of energy or consume less energy. Same is the case for the lighting sources. Lights are essential but their usage causes consumption of energy worldwide. The green trend is also being followed for the development of street lighting sources. These new lighting systems will be enable you to prevent the open manholes without having an adverse impact on the environment.

Rapid urbanization has lead to mis-mangement in the cities and you can find unplanned utility poles,mismatched bus benches and dreadful street lamps anywhere. The danish firm KiBiSi has designed a very innovative street furniture for overcoming this problem which is called 'sTREEt'. It is going to be the main center of attraction at Gwangju design biennale which is an international contemporary art festival that will be held in Korea.Buy cheap bike light, flashlight,fluorescent bulbs.

Double Life attains maximum efficiency for generating electricity by using its vertical axis wind turbine which also helps in reducing the visual resistance. Double Life is also equipped with LEDs which help in minimizing the energy consumed. The plate under which it is settled can also be used as a bench. The sunshine is detected by the sensors which are placed on the board of Double Life. Once the sunshine is detected the motors rotate the screw pillars which causes the lowering of the bench plate downwards via the spiral structure. After the sun sets the sensors detect the absence of sunlight and the screw pillars move the plate up towards the light position.Shopatron's retail-integrated bicycle headlight solution is a great fit for a service-focused company,Browse through our impressive range of sky lanterns and buy online now. The designing is done in such a way that the screw structure moves very slowly over the passage of time.while LED lights are an addition mountain bike light to the market place, consumers should do their research before investing in the technology. This helps the bench users to prevent accidents.

High output LED clusters light up the paths by using batteries which are charged by the large flexible polymer solar films that are contained in the top most section of street owl. By hand wiring these lights into the city's power grids,"From what we hear, the led lighting legislation has been a significant boost [to lighting research]," said Harris. it is possible to give the excess of solar power back to the city, get power during winters or the times when the sun rays are absent for a long period of time.

The lights have significantly lower maintenance costs as they are covered in transparent spheres which do not allow the debris to accumulate.

Edan has also gone a bit further by developing a parking meter which works on almost the same technology. The night owl parking meter uses the same solar energy to power itself and is also equipped with a built in lighting system. Therefore the requirement for an additional street light is reduced. The meter is able to gather energy which can be used to swipe a credit card or display time.