CertTree guarantee exam success rate of 100% ratio, except no one. You choose CertTree, and select the training you want to start, you will get the best resources with market and reliability assurance.CertTree have the latest Microsoft Azure 70-533 dumps|CertTree. The industrious CertTree IT experts through their own expertise and experience continuously produce the latest Microsoft Azure 70-533 dumps|CertTree to facilitate IT professionals to pass the Microsoft certification 70-533 exam.
Microsoft Azure 70-533 dumps|CertTree have wide coverage of the content of the examination and constantly update and compile. CertTree can provide you with a very high accuracy of exam preparation. Selecting CertTree can save you a lot of time, so that you can get the Microsoft 70-533 certification earlier to allow you to become a Microsoft IT professionals.CertTree is a convenient website to provide service for many of the candidates participating in the IT certification exams.
Share some Microsoft Azure Infrastructure Solutions 70-533 exam questions and answers below.
You administer an Azure Web Site named contoso. The development team has implemented changes to the website that need to be validated.
You need to validate and deploy the changes with minimum downtime to users.
What should you do first?
A. Create a new Linked Resource.
B. Configure Remote Debugging on contoso.
C. Create a new website named contosoStaging.
D. Create a deployment slot named contosoStaging.
E. Back up the contoso website to a deployment slot.
Answer: D
You manage an application deployed to virtual machines (VMs) on an Azure virtual network named corpVnet1.
You plan to hire several remote employees who will need access to the application on corpVnet1.
You need to ensure that new employees can access corpVnet1. You want to achieve this goal by using the most cost effective solution.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Create a VPN subnet.
B. Enable point-to-point connectivity for corpVnet1.
C. Enable point-to-site connectivity for corpVnet1.
D. Create a gateway subnet.
E. Enable site-to-site connectivity for corpVnet1.
F. Convert corpVnet1 to a regional virtual network.
Answer: C,D
HOTSPOT
You create a virtual network named fabVNet01.
You design the virtual network to include two subnets, one named DNS-subnet and one named Apps-subnet, as shown in the exhibit. (Click the Exhibits button.)
In the table below, identify the number of IP addresses that will be available for virtual machines (VMs) or cloud services in each subnet. Make only one selection in each column.
Answer:
You manage a cloud service that supports features hosted by two instances of an Azure virtual machine (VM).
You discover that occasional outages cause your service to fail.
You need to minimize the impact of outages to your cloud service.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Deploy a third instance of the VM.
B. Configure Load Balancing on the VMs.
C. Redeploy the VMs to belong to an Affinity Group.
D. Configure the VMs to belong to an Availability Set.
Answer: B,D
Your company has two cloud services named CS01 and CS02. You create a virtual machine (VM) in CS02 named Accounts.
You need to ensure that users in CS01 can access the Accounts VM by using port 8080.
What should you do?
A. Create a firewall rule.
B. Configure load balancing.
C. Configure port redirection.
D. Configure port forwarding.
E. Create an end point.
Answer: E
DRAG DROP
You administer an Azure Virtual Machine (VM) named CON-CL1. CON-CL1 is in a cloud service named ContosoService1. You discover unauthorized traffic to CON-CL1.
You need to:
- Create a rule to limit access to CON-CL1.
- Ensure that the new rule has the highest precedence.
Which Azure Power Shell cmdlets and values should you use? To answer, drag the appropriate cmdlet or value to the correct location in the Power Shell command. Each cmdlet or value may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.
Answer:
You plan to use Password Sync on your DirSync Server with Azure Active Directory (Azure AD) on your company network. You configure the DirSync server and complete an initial synchronization of the users.Several remote users are unable to log in to Office 365. You discover multiple event log entries for "Event ID 611 Password synchronization failed for domain."You need to resolve the password synchronization issue.Which two actions should you perform? Each correct answer presents part of the solution.
A. Restart Azure AD Sync Service.
B. Run the Set-FullPasswordSync Power Shell cmdlet.
C. Force a manual synchronization on the DirSync server.
D. Add the DirSync service account to the Schema Admins domain group.
Answer: A,B
HOTSPOT
You manage an Azure Web Site named contosoweb.
Some users report that they receive the following error when they access contosoweb:
¡°http Status 500.0 - Internal Server Error.¡±
You need to view detailed diagnostic information in XML format.
Which option should you enable? To answer, select the appropriate option in the answer area.
Answer:
You administer an Azure subscription with an existing cloud service named contosocloudservice. Contosocloudservice contains a set of related virtual machines (VMs) named ContosoDC, ContosoSQL and ContosoWeb1.
You want to provision a new VM within contosocloudservice.
You need to use the latest gallery image to create a new Windows Server 2012 R2 VM that has a target IOPS of 500 for any provisioned disks.
Which PowerShell command should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: D
You manage a cloud service named fabrikamReports that is deployed in an Azure data center.
You deploy a virtual machine (VM) named fabrikamSQL into a virtual network named fabrikamVNet.
FabrikamReports must communicate with fabrikamSQL.
You need to add fabrikam Reports to fabrikamVNet.
Which file should you modify?
A. the network configuration file for fabrikamVNet
B. the service definition file (.csdef) for fabrikamReports
C. the service definition file (.csdef) for fabrikamSQL
D. the service configuration file (.cscfg) for fabrikamReports
E. the service configuration file (.cscfg) fabrikamSQL
Answer: D
You are the administrator for three Azure subscriptions named Dev, Test, and Prod.
Your Azure Power Shell profile is configured with the Dev subscription as the default.
You need to create a new virtual machine in the Test subscription by using the least administrative effort.
Which Power Shell command should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: A
DRAG DROP
You manage an Azure virtual machine (VM) named AppVM. The application hosted on AppVM continuously writes small files to disk. Recently the usage of applications on AppVM has increased greatly.
You need to improve disk performance on AppVM.
Which Microsoft Azure Power Shell cmdlet should you use with each Power Shell command line? To answer, drag the appropriate Microsoft Azure Power Shell cmdlet to the correct location in the Power Shell code. Each Power Shell cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
* Set-AzureDataDisk
Sets the host-cache mode on an existing data disk object.
* Example:
This command gets the "MyVM" virtual machine running on the "myservice" cloud service, and then sets the data disk at LUN 2 of the virtual machine to use Nonehost caching.
Windows PowerShell
C:PS>Get-AzureVM "myservice" -name "MyVM" | Set-AzureDataDisk -LUN 2 -HostCachingNone| Update-AzureVM
* Set-AzureDataDisk Parameter: -HostCaching
Sets the host level caching settings of the disk. Possible values are: None, ReadOnly and ReadWrite ().
When you setup a data disk on a virtual machine, you get three host caching choices:
The purpose of a cache is to cache data to be read as reading from a cache is faster than reading from a disk.
There is no performance benefit in caching the log files as these will not be re-read by the application. Therefore, we need the logs to be written directly to disks rather than being written to cache first then disk (Read) or written to the cache only (Read/Write).
Your network includes a legacy application named LegacyApp1. The application only runs in the Microsoft .NET 3.5 Framework on Windows Server 2008.
You plan to deploy to Azure Cloud Services.
You need to ensure that LegacyApp1 will run correctly in the new environment.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. Upload a VHD with Windows Server 2008 installed.
B. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 2.
C. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 1.
D. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 3.
Answer: A,B
Your company plans to migrate from On-Premises Exchange to Office 365. The existing directory has numerous service accounts in your On-Premises Windows Active Directory (AD), stored in separate AD Organizational Units (OU) for user accounts.You need to prevent the service accounts in Windows AD from syncing with Azure AD.What should you do?
A. Create an OU filter in the Azure AD Module for Windows PowerShell.
B. Configure directory partitions in miisclient.exe.
C. Set Active Directory ACLs to deny the DirSync Windows AD service account MSOL_AD_SYNC access to the service account OUs.
D. Create an OU filter in the Azure Management Portal.
Answer: B
You manage a cloud service that is running in two small instances. The cloud service hosts a help desk application. The application utilizes a virtual network connection to synchronize data to the company's internal accounting system.
You need to reduce the amount of time required for data synchronization.
What should you do?
A. Configure the servers as large instances and re-deploy.
B. Increase the instance count to three.
C. Deploy the application to Azure Web Sites.
D. Increase the processors allocated to the instances.
Answer: A
70-533 is an Microsoft certification exam, so 70-533 is the first step to set foot on the road of Microsoft certification. 70-533 certification exam become more and more fiery and more and more people participate in 70-533 exam, but passing rate of 70-533 certification exam is not very high.When you select Microsoft Azure 70-533 dumps|CertTree, do you want to choose an exam training courses?
Microsoft Azure 70-533 dumps|CertTree have wide coverage of the content of the examination and constantly update and compile. CertTree can provide you with a very high accuracy of exam preparation. Selecting CertTree can save you a lot of time, so that you can get the Microsoft 70-533 certification earlier to allow you to become a Microsoft IT professionals.CertTree is a convenient website to provide service for many of the candidates participating in the IT certification exams.
Share some Microsoft Azure Infrastructure Solutions 70-533 exam questions and answers below.
You administer an Azure Web Site named contoso. The development team has implemented changes to the website that need to be validated.
You need to validate and deploy the changes with minimum downtime to users.
What should you do first?
A. Create a new Linked Resource.
B. Configure Remote Debugging on contoso.
C. Create a new website named contosoStaging.
D. Create a deployment slot named contosoStaging.
E. Back up the contoso website to a deployment slot.
Answer: D
You manage an application deployed to virtual machines (VMs) on an Azure virtual network named corpVnet1.
You plan to hire several remote employees who will need access to the application on corpVnet1.
You need to ensure that new employees can access corpVnet1. You want to achieve this goal by using the most cost effective solution.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Create a VPN subnet.
B. Enable point-to-point connectivity for corpVnet1.
C. Enable point-to-site connectivity for corpVnet1.
D. Create a gateway subnet.
E. Enable site-to-site connectivity for corpVnet1.
F. Convert corpVnet1 to a regional virtual network.
Answer: C,D
HOTSPOT
You create a virtual network named fabVNet01.
You design the virtual network to include two subnets, one named DNS-subnet and one named Apps-subnet, as shown in the exhibit. (Click the Exhibits button.)
In the table below, identify the number of IP addresses that will be available for virtual machines (VMs) or cloud services in each subnet. Make only one selection in each column.
Answer:
You manage a cloud service that supports features hosted by two instances of an Azure virtual machine (VM).
You discover that occasional outages cause your service to fail.
You need to minimize the impact of outages to your cloud service.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Deploy a third instance of the VM.
B. Configure Load Balancing on the VMs.
C. Redeploy the VMs to belong to an Affinity Group.
D. Configure the VMs to belong to an Availability Set.
Answer: B,D
Your company has two cloud services named CS01 and CS02. You create a virtual machine (VM) in CS02 named Accounts.
You need to ensure that users in CS01 can access the Accounts VM by using port 8080.
What should you do?
A. Create a firewall rule.
B. Configure load balancing.
C. Configure port redirection.
D. Configure port forwarding.
E. Create an end point.
Answer: E
DRAG DROP
You administer an Azure Virtual Machine (VM) named CON-CL1. CON-CL1 is in a cloud service named ContosoService1. You discover unauthorized traffic to CON-CL1.
You need to:
- Create a rule to limit access to CON-CL1.
- Ensure that the new rule has the highest precedence.
Which Azure Power Shell cmdlets and values should you use? To answer, drag the appropriate cmdlet or value to the correct location in the Power Shell command. Each cmdlet or value may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.
Answer:
You plan to use Password Sync on your DirSync Server with Azure Active Directory (Azure AD) on your company network. You configure the DirSync server and complete an initial synchronization of the users.Several remote users are unable to log in to Office 365. You discover multiple event log entries for "Event ID 611 Password synchronization failed for domain."You need to resolve the password synchronization issue.Which two actions should you perform? Each correct answer presents part of the solution.
A. Restart Azure AD Sync Service.
B. Run the Set-FullPasswordSync Power Shell cmdlet.
C. Force a manual synchronization on the DirSync server.
D. Add the DirSync service account to the Schema Admins domain group.
Answer: A,B
HOTSPOT
You manage an Azure Web Site named contosoweb.
Some users report that they receive the following error when they access contosoweb:
¡°http Status 500.0 - Internal Server Error.¡±
You need to view detailed diagnostic information in XML format.
Which option should you enable? To answer, select the appropriate option in the answer area.
Answer:
You administer an Azure subscription with an existing cloud service named contosocloudservice. Contosocloudservice contains a set of related virtual machines (VMs) named ContosoDC, ContosoSQL and ContosoWeb1.
You want to provision a new VM within contosocloudservice.
You need to use the latest gallery image to create a new Windows Server 2012 R2 VM that has a target IOPS of 500 for any provisioned disks.
Which PowerShell command should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: D
You manage a cloud service named fabrikamReports that is deployed in an Azure data center.
You deploy a virtual machine (VM) named fabrikamSQL into a virtual network named fabrikamVNet.
FabrikamReports must communicate with fabrikamSQL.
You need to add fabrikam Reports to fabrikamVNet.
Which file should you modify?
A. the network configuration file for fabrikamVNet
B. the service definition file (.csdef) for fabrikamReports
C. the service definition file (.csdef) for fabrikamSQL
D. the service configuration file (.cscfg) for fabrikamReports
E. the service configuration file (.cscfg) fabrikamSQL
Answer: D
You are the administrator for three Azure subscriptions named Dev, Test, and Prod.
Your Azure Power Shell profile is configured with the Dev subscription as the default.
You need to create a new virtual machine in the Test subscription by using the least administrative effort.
Which Power Shell command should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: A
DRAG DROP
You manage an Azure virtual machine (VM) named AppVM. The application hosted on AppVM continuously writes small files to disk. Recently the usage of applications on AppVM has increased greatly.
You need to improve disk performance on AppVM.
Which Microsoft Azure Power Shell cmdlet should you use with each Power Shell command line? To answer, drag the appropriate Microsoft Azure Power Shell cmdlet to the correct location in the Power Shell code. Each Power Shell cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
* Set-AzureDataDisk
Sets the host-cache mode on an existing data disk object.
* Example:
This command gets the "MyVM" virtual machine running on the "myservice" cloud service, and then sets the data disk at LUN 2 of the virtual machine to use Nonehost caching.
Windows PowerShell
C:PS>Get-AzureVM "myservice" -name "MyVM" | Set-AzureDataDisk -LUN 2 -HostCachingNone| Update-AzureVM
* Set-AzureDataDisk Parameter: -HostCaching
Sets the host level caching settings of the disk. Possible values are: None, ReadOnly and ReadWrite ().
When you setup a data disk on a virtual machine, you get three host caching choices:
The purpose of a cache is to cache data to be read as reading from a cache is faster than reading from a disk.
There is no performance benefit in caching the log files as these will not be re-read by the application. Therefore, we need the logs to be written directly to disks rather than being written to cache first then disk (Read) or written to the cache only (Read/Write).
Your network includes a legacy application named LegacyApp1. The application only runs in the Microsoft .NET 3.5 Framework on Windows Server 2008.
You plan to deploy to Azure Cloud Services.
You need to ensure that LegacyApp1 will run correctly in the new environment.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. Upload a VHD with Windows Server 2008 installed.
B. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 2.
C. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 1.
D. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 3.
Answer: A,B
Your company plans to migrate from On-Premises Exchange to Office 365. The existing directory has numerous service accounts in your On-Premises Windows Active Directory (AD), stored in separate AD Organizational Units (OU) for user accounts.You need to prevent the service accounts in Windows AD from syncing with Azure AD.What should you do?
A. Create an OU filter in the Azure AD Module for Windows PowerShell.
B. Configure directory partitions in miisclient.exe.
C. Set Active Directory ACLs to deny the DirSync Windows AD service account MSOL_AD_SYNC access to the service account OUs.
D. Create an OU filter in the Azure Management Portal.
Answer: B
You manage a cloud service that is running in two small instances. The cloud service hosts a help desk application. The application utilizes a virtual network connection to synchronize data to the company's internal accounting system.
You need to reduce the amount of time required for data synchronization.
What should you do?
A. Configure the servers as large instances and re-deploy.
B. Increase the instance count to three.
C. Deploy the application to Azure Web Sites.
D. Increase the processors allocated to the instances.
Answer: A
70-533 is an Microsoft certification exam, so 70-533 is the first step to set foot on the road of Microsoft certification. 70-533 certification exam become more and more fiery and more and more people participate in 70-533 exam, but passing rate of 70-533 certification exam is not very high.When you select Microsoft Azure 70-533 dumps|CertTree, do you want to choose an exam training courses?