An sintering oven used for producing ptfe

A used in the production of teflon sintering oven, drying oven, including housing, the top surface of box body is set with solar tank and vent, solar-thermal box right side set solar monitoring device, before the end of box set oven door, the right side of box body is provided with electric control cabinet, electric control cabinet set a timing device, temperature control device, inlet valve, exhaust valve and switch button, box body including shell and inner cavity, and setting of between shell and inner cavity has a heat preservation cotton, inner chamber set on two cooling board, two fans and purification device, casing set inside the rack and put tray, put aside content disc set for both have cooling hole, The bottom center of the shelf plate is provided with a connecting disk. The utility model has a simple structure and strong practicability. 

Through the combined heating method of solar energy and electric energy, not only the styling effect is improved, but also the service life is extended, the yield rate is increased, the energy consumption is reduced, the cost is saved, and the comprehensive utilization efficiency is improved.

Sintering oven used in the production of ptfe, whose character is: the Sintering oven including enclosure, as described in the top surface of box body is set with solar tank and vent, solar-thermal box right side set solar monitoring device, in the right side of the hole is located in the solar energy collection hot box, the box body front end face of the oven door, oven door includes the first oven door and the oven door and the oven door and described the oven door all set door the mouth and observation, the right side of box body is provided with electric control cabinet, electric control cabinet set timing device, temperature control device, Air intake valve and exhaust valve and switch button, temperature control device is set on the first heating button and the second heating button, switch the power button, button, and explosion-proof fan button button, box includes shell and inner cavity, with mentioned lumen between shell and a heat preservation cotton, inner chamber set on two cooling board, two fans and purification device, both on the heating panel Settings have mica heat sink, purification plant is located in between two mentioned fan, box set inside the rack and put tray, the bottom of the rack set wheels, put aside content disc set for both have cooling hole, Plate center set up at the bottom of the shelf are connecting disk, disk and a partition at connections, on the other side of the baffle plate and described shelf plate connected, put aside material plate is divided into four equal, connecting the center of the disk set has a hole, the bottom of the box body set with wheel groove HeJinKong, wheel to match the wheel groove and the stated, air inlet connected with the outside world.