CCNP certification 300-135 braindumps

Our CCNP certification 300-135 braindumps have wide coverage of the content of the examination and constantly update and compile. CertTree can provide you with a very high accuracy of exam preparation. Selecting CertTree can save you a lot of time, so that you can get the Cisco 300-135 certification earlier to allow you to become a Cisco IT professionals.CertTree is a convenient website to provide service for many of the candidates participating in the IT certification exams.


The CCNP certification 300-135 braindumps is designed and developed using latest technology to let the users prepare themselves for the exam without any mess. The Cisco 300-135 software can be downloaded instantly right after payment. The simplified and error CCNP certification 300-135 braindumps makes generates the reports immediately so that users can get to know about their performance on each trial.Customers are welcomes to take the 300-135 free trial of the software before paying for the product to get satisfied fully.


Share some CCNP 300-135 exam questions and answers below.
How to check MTU of interface using ping? / How can you check the links mtu size with ping command?
A. ping 10.1.1.1 size 1501
B. ping 10.1.1.1 size 1500 df-bit
C. ping 10.1.1.1
D. ping 10.1.1.1 no-size
Answer: B

The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C


The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: G

Ticket 4 NATACL

TROUBLE TICKET STATEMENT:

The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload !
ip access-list standard nat_pool
permit 10.1.0.0
! interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
! interfaceSerial0/0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospd authentication message-digest

On Which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A


The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A


What is the solution of the fault condition?
A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command
B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command
Answer: A

What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C

The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A

Two routers are connected through PPP connection. After the PPP was established the admin put OSPF running above it. The OSPF formed adjacency but after soon the adjacency dropped.
What is the reason? (The cause of OSPF forming an adjacency over a GRE tunnel and dropping immediately)
A. MTU does not match
B. Area 0 need to exist for OSPF to function properly
C. Gre tunnel destination is not reachable through tunnel
D. Gre tunnel ip address must be covered by network under ¡°router ospf 1¡±
E. ospf routes contains the route to tunnel destination
Answer: C

The fault condition is related to which technology?
A. NTP
B. IP DHCP Server
C. IPv4 OSPF Routing
D. IPv4 EIGRP Routing
E. IPv4 Route Redistribution
F. IPv6 RIP Routing
G. IPv6 OSPF Routing
H. IPV4 and IPV6 Interoperability
I. IPv4 layer 3 security
Answer: G

CertTree CCNP certification 300-135 braindumps contain everything you need to get certified.CertTree CCNP certification 300-135 braindumps make you prepare the questions same as the Cisco Certification 300-135 exam. our 300-135 practice Q&A are based on VUE testing centre features so to provide you every thing before you actually take your 300-135 exam.At the same time providing CCNP certification 300-135 braindumps will better optimize the service for you to create a better learning platform to help you pass the exam successfully!