Model SPT-T130
Length 1650mm
Pipe Diameter 80±1mm
Wavelength 10.6um
Output Power Stable Value 130W
Max Output Power 150W
Triggering Voltage 27-29KV
Working Voltage 21-24KV
Triggering Current 6-7mA
Max Working Current 32mA
Type Of Cooling Water-cooling 15-25℃
Impulse Frequency 100% to 5KHZ
Spot Diameter 6±1mm
130 Watt CO2 laser tube (SPT laser tube) Installation instructions
1. The cooling water pipe installation. When installing water pipe, please make sure the cooling water inlet must follow from the positive to negative, and down into the water, and the interface is not leaking. Before starting the laser tube must store enough water in the water cooling pipes and no air bubbles before use (must check every time before start laser tube). If the laser tube is mounted vertically, please ensure that no air bubbles at the top of the laser tube. It will cause thermal shock when it runs with air bubbles in the water pipe, which is easy to damage your laser tube.
2. To maintain the good performance of glass CO2 laser tube, keep the cooling water temperature between 20-25 °C. The instability of cooling water's temperature will influence laser tube output power.
Length 1650mm
Pipe Diameter 80±1mm
Wavelength 10.6um
Output Power Stable Value 130W
Max Output Power 150W
Triggering Voltage 27-29KV
Working Voltage 21-24KV
Triggering Current 6-7mA
Max Working Current 32mA
Type Of Cooling Water-cooling 15-25℃
Impulse Frequency 100% to 5KHZ
Spot Diameter 6±1mm
130 Watt CO2 laser tube (SPT laser tube) Installation instructions
1. The cooling water pipe installation. When installing water pipe, please make sure the cooling water inlet must follow from the positive to negative, and down into the water, and the interface is not leaking. Before starting the laser tube must store enough water in the water cooling pipes and no air bubbles before use (must check every time before start laser tube). If the laser tube is mounted vertically, please ensure that no air bubbles at the top of the laser tube. It will cause thermal shock when it runs with air bubbles in the water pipe, which is easy to damage your laser tube.
2. To maintain the good performance of glass CO2 laser tube, keep the cooling water temperature between 20-25 °C. The instability of cooling water's temperature will influence laser tube output power.
