ライフ、健康

元気で幸せで暮らすため いい生活習慣を身に付けまましょう

Safety matters for pellet bbq grills

2020-08-29 16:17:45 | 不老長寿

     Pellet bbq grills is currently the fastest growing in grill sales, no one! No one! No one! Important things are said three times.

     The pellet bbq grills are not only stable enough but also able to reach the required temperature accurately. It can use different types of wood pellets to add a variety of flavors to grilled food. Before using pellet bbq grills, you should know some basic operations and safety knowledge about pellet bbq grills, so whether you choose walnut, hickory, cherry, or any other fruit wood pellets, you also need to pay attention to the following points matter.

    1. Keep the wood pellets dry. If the wood pellets are disturbed by moisture, the igniter will not be able to ignite the pellets within the specified time. Even if the particles are ignited, the calorific value generated during combustion will be greatly reduced.

    2. Don't use pellet bbq grills (barbecue & smoke) in the rain. If the electronic devices in pellet bbq grills encounter water, this may ruin them. When the igniter, fan or motor gets wet by rain, it is very likely that a short circuit or rust may occur! So make sure to use pellet bbq grills in good weather.

   3. During the use of pellet bbq grills, be sure to check regularly; make sure that the power cord and thermometer cord are not corroded by water or other liquids. And every time before using the grill, you need to check whether they are damaged or loose.

    4. Use pellet bbq grills in a ventilated environment and ensure that the chimney of the grill is unobstructed. (FOR OUTDOOR USE ONLY)

    5. Before pellet bbq grills are powered on or off, the control knob of the feeder should be kept in the off state. And make sure that the power cord is effectively fixed and connected to a socket with a grounding function, so as to avoid tripping or damaging pellet bbq grills during grilling.

    6. After each happy barbecue party, you need to wait for the grill to cool down completely before cleaning. Must be cleaned, and in the cleaning process may need to use a wire brush to clean the grill, so as to prevent the residue from being burnt the next time it is used, and it will also contaminate the fresh food. Therefore, before each barbecue, be sure to replace the new oil-receiving tin foil box, because during the barbecue, the food will produce a large amount of fat (such as bacon or pork shoulder) under high temperature, which will collect and flow into In the tin foil box, the grease is very likely to burn in the high temperature oven cavity!


Precautions for buying bbq grill

2020-08-29 15:21:15 | 不老長寿

            In summer and autumn, it is the happiest thing to have a barbecue with friends and a drink of draft beer. But if you want to eat delicious barbecue, then bbq grill is definitely an indispensable weapon. So what should you pay attention to when buying bbq grill? Let's analyze it below.

            When we want to go outdoor barbecue, the first thing to consider is whether the bbq grill is convenient to carry, because the bbq grill that is carried can bring convenience to our travel. Therefore, when choosing a bbq grill, we must choose the kind of detachable and foldable bbq grill, so that we will not dislike its cumbersomeness when traveling, so this is the focus of our consideration when buying bbq grill when we go to outdoor barbecues.

            Of course we have to consider the material of the bbq grill. The current bbq grill materials on the market are not only diverse and uneven in quality, but the prices are also high and low. So when we choose, we don’t have to buy expensive ones, we have to choose suitable ones with good quality. First of all, don't think about iron, because iron bbq grill is not durable and easy to rust. We can consider stainless steel, because it is not only easy to clean, but also not easy to rust, and the service life is also guaranteed.

         Finally, the size of the bbq grill is also one of the factors to consider when buying. Although it is said that the smaller it is, the more convenient it is to carry, but we also need to consider the number of people in the same group. If the bbq grill is too small, then it will definitely not be available for many people. , Can't let some people watch it, so this has a great impact on multi-person gatherings. So buy a suitable size so that everyone can enjoy the food together.

            The above are the things you need to pay attention to when choosing bbq grill. In fact, there are some other factors that need to be considered, such as oil guide, smoke prevention device, built-in thermometer, etc. These optional accessories can be considered if necessary. There is also consideration of the choice of gas, charcoal and other issues, but now with everyone's concept of environmental protection, more and more people will choose gas.

        The above are the main considerations when we choose bbq grill. In fact, there are still some factors that can be considered, such as oil guide, smoke prevention device, built-in thermometer, etc., these are optional accessories. No. There is also a choice of gas, charcoal and so on. However, as the current concept of environmental protection has become popular among the people, more and more people choose gas.


Advantages of Vacuum Casting Technology

2020-08-19 11:05:12 | 不老長寿

Vacuum casting is a casting process in which metal is smelted, poured and crystallized in a vacuum chamber. Vacuum casting can minimize the gas content in the metal and prevent metal oxidation. With the development of vacuum casting technology, many products made of other materials can also be manufactured using vacuum casting technology in a vacuum environment. For example, the solid color vacuum casting model.

Vacuum modeling is a physical modeling method. It combines vacuum technology with sand mold casting. The cavity surface and back of the sand mold are sealed by a plastic film, and negative pressure is generated by vacuum pumping to cause the inside and outside of the sand mold. The pressure difference causes the mold sand to be tightly formed. After the core is placed, the mold is closed, and the casting is waited for the casting to solidify, the negative pressure is released or the air extraction is stopped, and the mold sand collapses to obtain the casting.

There are many advantages of vacuum casting technology, mainly including the following:

1. The existence of vacuum negative pressure can make the mold sand compact and increase the strength of the mold.

2. Increase the vacuum degree moderately to shorten the filling time, which not only accelerates the filling speed but also stabilizes it.

3. Vacuum low-pressure casting can speed up the fluidity of the material liquid at low temperatures, avoid the phenomenon of material liquid suction caused by high-temperature casting, and increase the pinhole defects of the casting.

4. The casting has good formability, which is conducive to the formation of castings with clear contours and smooth surfaces and large thin-walled castings.

5. The casting has dense structure and high mechanical properties.

6. Under normal circumstances, there is no need for a riser, which greatly improves the yield of the product, usually up to 90%.


WHAT IS AUTOMATIC LIQUID SOAP DISPENSER?

2020-08-13 04:30:40 | 不老長寿

Automatic liquid soap dispenser, also known as soap dispenser or soap dispenser, features automatic and quantitative hand washing liquid. This product is widely used in public toilets. You can use soap to clean your hands and other hygiene to avoid contact, which is very convenient and hygienic.

Automatic liquid soap dispenser, generally including a liquid outlet faucet fixed on the countertop, a soap liquid bottle disposed under the countertop, or a liquid discharge mechanism for hydraulically discharging the soap in the liquid soap bottle, for driving the liquid discharge mechanism Pressure buttons etc.

Generally, the automatic liquid soap dispenser is matched with the sink and installed near the faucet of the sink. When installing automatic liquid soap dispenser, you need to check whether the sink has automatic liquid soap dispenser holes, otherwise it cannot be installed.