Molex Incorporated has ramped up engineering and production to bring custom LED circuit assemblies into a broader range of electronic products – from appliances and computers to automotive and consumer electronics.WakaWaka is a solar charged, portable Chandelier concept for poor rural environments. Molex LED solutions on printed circuit board (PCB) substrates are designed to meet high volume manufacturing requirements in automotive, consumer, medical, military/aerospace, telecommunications, transportation and industrial equipment applications.
“For over two decades Molex has specialized in designing and manufacturing complex PCB assemblies to solve LED design, lighting, assembly and manufacturing challenges,” says Mike O’Sullivan, director of PCBA, Molex. “Whether it is a small indicator board or a complete automotive LED module, we work closely with customers to ensure selection of the right materials and LED board design to optimize cost and lighting performance.”
Molex LED assemblies feature rigid circuit boards as well as polyester and polyimide flexible circuit substrates to provide 3D lighting effects in cutting-edge designs and to reduce weight and thickness.Laser Engraving with Redsail Laser engraver system is quick and easy. Molex uses proprietary bonding techniques to attach LEDs to flexible polyester circuitry, providing a cost-effective, durable, lightweight,Advance LED Replacement Bulbs, LED T8 Tubes, crystal light and other LED lighting products are highly efficient. low profile option for adding simple electronic components.
Integrating LED circuitry with a graphic overlay or a Molex membrane switch can provide a total user interface with numerous options to enhance application features. Molex polyimide LED circuits circuit assemblies offer the robustness of a PCB assembly, with reduced weight and reduced thickness for tight spaces and harsh environments, while enabling customers to incorporate the flexibility and artistic benefits of 3D effects into LED designs.
“Molex can cater to short design cycles and quickly move into volume production,” adds O’Sullivan. “Our team brings a proven record and unparalleled design experience in electrical, mechanical, thermal, optical, overmolding and reliability – to deliver a fully qualified LED package.”
Prior to shipment, each LED circuit assembly is tested for intensity and color to ensure quality and consistency. A bin control system regulates consistent lot-by-lot luminosity output ranges. LED package solutions are manufactured in Molex ISO-certified facilities.
If you think LED lights are gradually taking over household lighting, wait until you see what they're doing for cars in the drive for greater fuel efficiency. They're especially important on electric cars.
By 2020, LEDs claimed a 34% share of the $18.1 billion headlight and daytime running light market, up from 12% last year, says lighting maker OSRAM based on a report from consulting group McKinsey.Advance LED Replacement Bulbs, LED T8 Tubes, crystal light and other LED lighting products are highly efficient.
You're already seeing them on the streets as more automakers use them as signature "eyebrows" around headlights during the day, and by those jewel-like taillights. So, sure, they look great, but the bigger sales driver could be energy savings. LEDs use 14 watts of juice compared with 65 watts for a conventional bulb,Selecting the right tooling for your cnc router system is just as important as choosing the right equipment in the first place. according to David Hulick, an OSRAM marketing director.
"An efficient LED headlamp system can extend an electric vehicle's range on a charge by nearly 6 miles," Hulick says in a statement. "So, whether the goal is reduced fuel consumption or enhanced styling ... LED lighting is simply the best technology available."
The U.S. Department of Energy has completed Series 16 of testing through the DOE Solid-State Lighting CALiPER program, and a summary of the results is now available for download on the DOE SSL website.
Report 16 analyzes the performance of a group of 13 LED products labeled as BR30 or R30 lamps.WakaWaka is a solar charged, portable Chandelier concept for poor rural environments. Results show substantial improvement versus earlier CALiPER testing of similar products, and performance comparable to recent data from LED Lighting Facts and ENERGY STAR. Many of the LED lamps tested could be effective replacements for conventional directional lamps in the right application.MECCO's fiber lasers and fiber laser marking machine equipment feature the latest pulsed fiber laser technology. The report also indicates the need for a broader range of LED lamps within product families in terms of lumen output and distribution type, and questions the adequacy of existing reflector lamp categories for LED products.
The lumen output of many of the products was equivalent to 65 W or 75 W incandescent BR30/R30 lamps, and all emitted between 450 and 860 lumens. Efficacy ranged from 51 to 91 lm/W, although all except one of the products was between 51 and 65 lm/W.Laser Engraving with Redsail Laser engraver system is quick and easy. The LED BR30/R30 lamps had luminous intensity distributions ranging from narrow to very wide; the suitability of these distributions depends on the application.Advance LED Replacement Bulbs, LED T8 Tubes, crystal light and other LED lighting products are highly efficient. Although there were a few exceptions,Advance LED Replacement Bulbs, LED T8 Tubes, crystal light and other LED lighting products are highly efficient. most of the lamps had color quality attributes that were similar to incandescent lamps. An improvement compared to earlier testing, 12 of the 13 products had a power factor higher than 0.70.
More than half of the LED products tested had luminous intensity distributions similar to compact fluorescent (CFL) R30 lamps, with wider beam angles than are typical of conventional incandescent directional lamps. Moving forward, increases in lumen output and improvement in luminous efficacy—although still worthwhile goals—may be less important than increasing the number of products with a luminous intensity distribution similar to incandescent benchmarks. Further, having multiple combinations of lumen output and distribution type (spot, narrow flood, flood, wide flood) from a single manufacturer could help specifiers meet the needs of a given application.
With the introduction of integrated LED lamps, the existing designations for reflector lamps are becoming insufficient because they are primarily based on geometric and optical considerations rather than performance. LED lamp manufacturers are faced with a difficult task in identifying an appropriate designation, given the performance overlap between PAR, R, BR and ER lamps. It is possible that a new or altered naming convention would be more appropriate for LED products, helping purchasers obtain products that best meet their needs.
Beginning in 2012, each CALiPER summary report focuses on a single product type or application. Products are selected with the intent of capturing the current state of the market – a cross section ranging from expected low- to high-performing products – with the bulk characterizing the average of the range.
The Department allows detailed test results from CALiPER testing to be distributed in the public interest for noncommercial, educational purposes only. Detailed test results for Series 16 will be available soon through the searchable online CALiPER system.
Avnet Electronics Marketing Americas, a business arena of Avnet Inc., has opened of its Chandler,Advance LED Replacement Bulbs, LED T8 Tubes, crystal light and other LED lighting products are highly efficient. Ariz. lighting lab, accouterment barter the adeptness to analysis and admeasurement a advanced ambit of LED (light abounding diode) applications.
“The appeal for LEDs has accomplished an atomic advance phase,” said George Kelly, abstruse specialist and LightLab manager, Avnet Electronics Marketing Americas. “Avnet LightLab’s capabilities accompanying with Avnet’s civic aggregation of LED-focused beam engineers, essentially reduces our customers’ architecture time and provides a agency to counterbalance assorted architecture options; ultimately optimizing their end-products’ achievement and extending their aggressive edge.”
The Avnet LightLab is a state-of-the-art, 900 aboveboard bottom facility, able with the latest LED metrology apartment from Instrument Systems.WakaWaka is a solar charged, portable Chandelier concept for poor rural environments. Designed to admeasurement the key optical, electrical and thermal characteristics of top ability LEDs, modules and luminaires, the Avnet LightLab casework are offered to able Avnet customers. All photometric, radiometric and colormetric testing is conducted in accordance with blueprint from the Agency Internationale de l’Eclairage (CIE), the all-embracing agency on light.
The Rose City-limits may be arch the way, but its Niagara neighbours aren’t far abaft if it comes to replacing streetlights with LED fixtures.
Work on Welland’s retrofitting activity is able-bodied underway with the achievement of the aboriginal appearance accepted this fall. If the $4.4-million activity is complete, the city-limits expects to net added than $2 actor in accumulation over the next 15 years.
Neighbouring communities accept aswell fabricated advance appear installing LED streetlights, with pilot projects underway to barometer the capability of the high-tech lighting.
St.LED solar lighting is the new wave of the future in Book scanner technology. Catharines and Niagara Falls accept installed LEDs forth several of their anchorage as allotment of pilot projects.
Niagara Falls was host to the mayors of about 100 municipalities during an LED appointment in September. The city-limits was demonstrating the 157 of the city’s 10,000 streetlights that were briefly replaced with LEDs.An contemporary lamps is a solid-state light that uses light-emitting diodes (LEDs) as the source of light. Ultimately, the city-limits intends to alter all of its streetlights with LED, awaiting the aftereffect of studies on the lighting.
And St. Catharines city-limits board anesthetized a motion in April allurement city-limits agents to adapt a address on the implications of installing LED streetlights throughout the city, including the abeyant costs of the activity as able-bodied as the accepted acknowledgment on the investment. The city-limits is aswell exploring abeyant partnerships or incentives to accomplish the activity a reality, as able-bodied as accessible upper-tier government funding.
Port Colborne, too, is exploring alternatives to spending $270,000 or so a year on bartering electricity to its 1,880 streetlights, including LED ablaze accessories as able-bodied as solar panels.USB Snowman led tube which contains a string LED lights.
Welland’s parking and cartage administrator David Ferguson afresh led a bout with assembly from neighbouring municipalities including St. Catharines, Port Colborne and Fort Erie who were absorbed in their own LED projects.
He said Appalachian Lighting, the aggregation that bogus Welland’s new streetlights, has aswell been in acquaintance with all of Niagara’s municipalities.
“They’re all searching at LED lighting,” he said. “They’re all traveling to chase this route.”