Handheld Video Stabilizer SK-SW03N

　　As video cameras become more compact and the performance of mobile or motion cameras becomes more powerful, we are also increasingly confident in the professional production of these devices, and it is worth considering that we should purchase them as camera stabilizers.

　　The camera stabilizer market is in a period of drastic change. The traditional mechanical camera stabilizer and the new electronic camera stabilizer coexist. Before buying your camera stabilizer, you should know that no matter what type of camera stabilizer, there are some common The basic factors can affect the final stability.

　　Lens selection

　　The wider the viewing angle, the less noticeable the jitter of the picture. Most sport cameras have a widest viewing angle of at least 120 degrees, ensuring that everything you want to capture is included in the picture no matter where it is fixed. And if your hand is a large-size sensor camera or full-frame video camera, to obtain a 120 degree angle at least 10mm focal length lens is required. Whether the 10mm lens or sports camera will make the picture produce fisheye deformation, if the shooting scenery is not a problem, but if you shoot people will have strange distortion. Therefore, the ideal camera focal length camera photography in the 18mm to 24mm between the focal length of the screen to stabilize and avoid distortion to find a balance between. If you use a sports camera, you can also set a narrower angle of view (such as 90 degrees).

Handheld Video Stabilizer SK-SW03N

　　Size: 37.5*19.5*12.5 cm

　　Product weight: 2.02 KG

　　Max load capacity: 1.5KG

　　Important notice: We upgraded SK-SW03, the new one comes with rubber mat, scale marks on the camera mounting plate, more flexible hand grip, lockable center post etc, but we remove the bottom plate to enable you to hold it for longer shooting but without fatigue.

The world's smallest sevenoak camera slider system

　　You can also center the camera slider on the tripod's PTZ, because the load is relatively large, tripods and PTZ need to use higher quality products, otherwise it will lead to intense jitter during exercise, ranging from the final effect of the impact of weight It will cause equipment damage. After the camera slider is set up, still the camera is fixed on the PTZ, adjust the PTZ camera so that the camera perspective and the ground parallel, and then select the appropriate foreground. The choice of the future can serve as a shelter, highlighting the role of space sense, so the plane's movement must have a prospect with, before the works can be more grade.

　　2, when the accuracy is not high, camera slider can be installed on the profile, but also can be used, you can save costs.

　　3, when the need for general accuracy, but not subject to impact, can also be as follows:

　　4. When the accuracy is very high, but also in the vibration environment, the need for camera slider have a certain rigidity and impact work, we must have this design.


　　Carbon Fiber Camera Slider SK-TXS80

　　THE Sevenoak SK-TXS80 is a portable and extendable carbon fiber Camera slider designed for both amateur and professional photographers/video makers.It features a belt-drive system driven by anincluded flywheel. The flywheel attaches to the end of the camera slider, providing a handle for smooth and precise hand-cranked slides, even at slow speeds.It also serves as an inertial dampener that helps your camera stop smoothly for usable tracking shots and push-ins from start to finish of each take.

More information about sevenoak camera stabilizer,camera dolly,camera rig