Thrust ball bearings are commonly used in the industry as a support part for vibration motors and other equipment. Although the structure of this part is very simple, because the use of this part is slightly different, it may lead to many different installation diagrams, so the following We have asked the manufacturer of the bearing to introduce the installation method of the bearing: First, after we get the drawing, we usually check the corresponding structure of the part according to the drawing.
The main structure of the thrust ball bearing is generally the shaft ring and the seat ring. , Cage, steel ball, etc. This is a separate part, so it needs to be confirmed with the corresponding parts before it can be installed correctly. Second, when we install according to the drawing, we must pay attention to the installation order of the upper and lower bearings, because the size of the bearings ring manufacturers upper and lower seat rings is significantly different, so extra care must be taken not to install it in the opposite direction. 3. In addition, we should also pay attention to that after installing the thrust ball bearing, we must check whether the bearing is running flexibly and whether the clearance is too loose or too tight.