![](https://blogimg.goo.ne.jp/user_image/63/e9/6ddaa8f143a27452c0adf3ab0d2ba8b8.jpg)
It's important to be sure that the height of the camera and the story you want to express are on the main line. Almost everyone has to deal with it. Holding something so heavy in front of me and holding it even for hours. If you have a back injury, but has been bent over his chest, is equal to always let the shoulder force. This is very bad for the body, so be careful to control the hard back. Keep your shoulders and back straight, shoulders and buttocks upright in a line, to avoid excessive force. Of course, if you want to control the camera stabilizer in the chest, you also want to make it as close as possible to the body, to avoid excessive loss of physical fitness.
The right balance
Often I see a lot of people think the balance has been adjusted, but once the camera stabilizer is turned off, the camera loses its balance. This means that the right balance has not been set and the motor has to laboriously correct the machine to a balanced position. Even with the camera stabilizer, but if not properly balanced, the motor will still work to waste electricity, which is also a waste of space to be corrected. Since 20% of the force has been used to correct the balance, 20% of the force is lost during the actual operation of the balance.
Handheld Video Stabilizer SK-SW03N
The Sevenoak stabilizer SK-SW03N is a lightweight, hand-held camera stabilizer system designed for DSLR cameras weighing up to 1.5KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs.
Size: 37.5*19.5*12.5 cm
Product weight: 2.02 KG
Max load capacity: 1.5KG
Important notice: We upgraded SK-SW03, the new one comes with rubber mat, scale marks on the camera mounting plate, more flexible hand grip, lockable center post etc, but we remove the bottom plate to enable you to hold it for longer shooting but without fatigue.
![](https://blogimg.goo.ne.jp/user_image/63/e9/6ddaa8f143a27452c0adf3ab0d2ba8b8.jpg)
Operating the camera stabilizer is a very laborious one, and it is important to save physical effort to shoot useful scenes. You can shoot some clips in advance to the director of photography to see. This will not have been holding the camera stabilizer, you can put it on the C-lamp holder or comes with lamp holder. This will save space, that is, take the necessary pictures, do not always have a camera stabilizer. When unnecessary, you do not need to keep it physically.
Pick camera attachments
The first thing you need is a monitor, you have to see what you're taking, but not every camera has a monitor, and if not, it's usually not the case. You need a monitor that can be installed in a comfortable position to monitor the picture.
More information about sevenoak camera slider,camera dolly,camera rig
The right balance
Often I see a lot of people think the balance has been adjusted, but once the camera stabilizer is turned off, the camera loses its balance. This means that the right balance has not been set and the motor has to laboriously correct the machine to a balanced position. Even with the camera stabilizer, but if not properly balanced, the motor will still work to waste electricity, which is also a waste of space to be corrected. Since 20% of the force has been used to correct the balance, 20% of the force is lost during the actual operation of the balance.
Handheld Video Stabilizer SK-SW03N
The Sevenoak stabilizer SK-SW03N is a lightweight, hand-held camera stabilizer system designed for DSLR cameras weighing up to 1.5KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs.
Size: 37.5*19.5*12.5 cm
Product weight: 2.02 KG
Max load capacity: 1.5KG
Important notice: We upgraded SK-SW03, the new one comes with rubber mat, scale marks on the camera mounting plate, more flexible hand grip, lockable center post etc, but we remove the bottom plate to enable you to hold it for longer shooting but without fatigue.
![](https://blogimg.goo.ne.jp/user_image/63/e9/6ddaa8f143a27452c0adf3ab0d2ba8b8.jpg)
Operating the camera stabilizer is a very laborious one, and it is important to save physical effort to shoot useful scenes. You can shoot some clips in advance to the director of photography to see. This will not have been holding the camera stabilizer, you can put it on the C-lamp holder or comes with lamp holder. This will save space, that is, take the necessary pictures, do not always have a camera stabilizer. When unnecessary, you do not need to keep it physically.
Pick camera attachments
The first thing you need is a monitor, you have to see what you're taking, but not every camera has a monitor, and if not, it's usually not the case. You need a monitor that can be installed in a comfortable position to monitor the picture.
More information about sevenoak camera slider,camera dolly,camera rig
※コメント投稿者のブログIDはブログ作成者のみに通知されます