Which is the best Camera Slider?

　　We all know that adjusting the height of a tripod is very troublesome when shooting. You need to lean down and unscrew the three locking knobs, then pull it up or down and lock it one after another ... not only time-consuming but also often require two people together Adjustment.

　　Camera slider is often used in a lot of shooting work, the use of the camera or SLR camera only need to install the camera slider, you can ensure that the mobile shooting to maintain the stability of the screen, handheld shooting does not appear when the picture will shake.

　　Camera Slider SK-LS85

　　The Sevenoak Camera Slider SK-LS85 is designed to give you the ability to create good-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, super-smooth glide rail, spirit level & tension adjustment, the camera Slider SK-LS85 gives you the best value. It can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground. The camera slider SK-LS85 is suitable for amateur cameras, professional cameras as well as for cameras with the function of recording movies (for example Canon 7D, Canon 5D Mark2, Canon 60D,Canon 500D~550D,Nikon D3100,D7000,Sony A55 etc)
　　Size: 85*9*7 cm
　　Product weight: 1.35 KG
　　Max load capacity: 7KG


　　For film and television production, buy a not very good camera does not matter, but your camera slider must be good, so you can get great footage. In addition to simply swiping left and right, you can also do a lot of things with the camera slider. This tutorial will tell you 10 tips / tricks, including how the camera slider and tripod work together to simulate the effect of a rocker, and how you can use it on your hand The camera slider, it depends entirely on your creativity.

More information about sevenoak Camera slider,Camera dolly,Camera Rig

A Compact, Portable Pantograph Camera Slider for your video

　　You do not always need the best, most expensive equipment, sometimes limited equipment is a good thing, you can always be imaginative, so you become more creative. This video shows how to simulate a camera slider with a tripod. This kind of shooting skills and we have released before "to enhance the movement of the fixed lens" has the same purpose.

　　Just put your camera on a tripod, push and pull the camera with the tripod, move the camera slowly, and you can pan the camera to adjust the shooting angle so that the camera movement seems to be done with the camera slider so that the camera movement looks smooth.

　　I believe when everyone went out shooting have felt too heavy equipment, weight is very hard feeling. However, in order to shoot the ideal work they have to bring complete photographic equipment. So Xiaobian today to share with you a short video, you can teach you how to simulate a monopod camera slider fragment.
　　Sevenoak Motorized Camera Slider SK-MTS100

　　THE Sevenoak SK-MTS100 is a motorized Camera slider designed for creating dynamic video and time lapse photography sequences with fluid and precise motorized slides. It works with most DSLR, mirrorless and digital cinema cameras with the included shutter release cables.

　　Sevenoak SK-MTS100 camera slider comes with a remote controller which is connected with the motorized slider via Bluetooth. And it also comes with a dedicated Application which can be download from Apple Store and can be used to control the movements and time lapse photos.

　　Overall Size: 126*26*19cm

　　Working distance: 80cm

　　Horizontal max load capacity: 10kg

　　Vertical max load capacity: 4kg

　　Power supply: 12V

　　Working temperature: -200-600C

　　Power supply: 12V/5A AC adapter or power pack which

　　Supply 12V/5A output

　　Working temperature: -200-600C


　　The camera slider is great for taking a short moving shot. I personally used to make two films.

　　If you shoot a short moving camera with a digital SLR camera, look for a miniature desktop camera. These seemingly insignificant components are critical at the very moment of the moment and most can withstand considerable weight, even if you are using a sevenoak camera dolly mini movie camera. By using this method, you can shoot effective moving lenses through many planes. And because it's handy to use and there's not a lot of setup time between shots, you can shoot a lot in just a few minutes.

More information about sevenoak camera viewfinder ,camera dolly,camera rig

Sevenoak Camera Slider Turn your videos into memories

　　In general, only professional videographers will buy camera slider exclusively. Daily video shooting do you want to have a camera slider made its own? Today I bring you a professional camera slider DIY production process, the cost will not be more than 3 soft sister coins, the shooting effect is definitely not lose big. Smart tricks buddy move it!

　　Step one: copper polished polished

　　The first thing to do is to make the camera sliderca track, where I use a 3-meter long, 22-mm-diameter copper standard. The length and diameter of the pipe can be adjusted according to their own needs, where I will be the same length of brass saw saw two spare.

　　Oxidation will make the brass looks dirty, then clean it with metal and soapy water can be easily done. Of course, we can also apply a layer of metal paint on the copper tube to prevent oxidation, liquid paint can be, but need to brush twice.

　　Camera Slider SK-LS60
　　The Sevenoak Camera Slider SK-LS60 is designed to give you the ability to create good-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, super-smooth glide rail, spirit level & tension adjustment, the camera Slider SK-LS60 gives you the best value. It can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground.
　　Size (LxWxH): 60*9*7 cm
　　Product weight: 1.05 KG
　　Max load capacity: 10 KG


　　Step two: prepare the production of fiberboard

　　The production of several MDF is mainly to connect two steel pipes, but also for the production of back to bring a lot of convenience.

　　Material selection 6 mm thick MDF, because it is cheap, hard texture. The template will be printed out with a double-sided adhesive tape on the edge of 12 square meters of square fibreboard, punched in the mark. In order to ensure accuracy, with 1 mm drill bit drilling, and then replaced by 4 mm drill bit, the middle hole requires 9 mm drill bit to drill. After you get it, saw the excess part saw with a saw, and then sanding, spray black paint moment big. Such a template to do two, on both ends, in the middle of a bigger piece.

More information about sevenoak camera slider,camera dolly,camera rig

How to do it with camera rig

　　Most of the time, we can choose to take good pictures of light conditions. But not all the photography environment can be around us. Camera in dark environment, camera rig is preferred. If you happen to have no band, then how to do it. Talk to everyone today about this topic.

　　Camera rig, whether it is for photographers or photographers, are indispensable auxiliary equipment. Especially in the long exposure, often require camera rig to stabilize the camera, to ensure the picture effect. If you use the camera rig improperly during shooting, it is likely to affect the shooting, so how should a camera enthusiast use the camera rig? If you want to know, just read on!

　　(1) First observe the environment

　　Before shooting, you need to observe the surrounding environment, find a good shooting angle, and then decide whether you need a camera rig.

　　(2) A tripod points to the subject

　　The main reason for this is to leave enough space to adjust the camera to prevent it from tripping over the tripod and to ensure that the camera does not tip over easily when it is shot down slightly.

　　Motorized Push Cart(camera dolly) SK-MS01

　　Sevenoak SK-MS01 is motorized push cart (camera dolly) which offers your video with more dynamic movement but keep your budget low. It features double motor operation, Aluminum construction, 1/4” screw holes, 0.65mm connecting hole, power switch, forward-backward switch and speed control button. SK-MS01 is powered by two 1.5V AA batteries and can support up to 3KG. It can be easily attached to any camera dollies with standard 0.65mm connecting holes and moves smoothly at different angle. With 1/4” screw holes, LED light, Monitor or microphone can be added via articulated arms. With the forward-backward switch and speed control button, the movement and speed can be controlled easily.
　　Size: 19*17*8 cm
　　Product weight: 0.41 KG
　　Max load capacity: 3 KG


　　(3) vertical axis and the ground

　　In order to ensure the stability of the camera rig, should ensure that the camera's weight evenly distributed in the three tripod, the simplest way to confirm is to keep the vertical axis and the ground. Now a lot of camera rigs are equipped with a level, if not, you can own a.

　　(4) try not to extend the central axis

　　Many photographers for the sake of convenience and the shaft up to the highest, I do not know this method will greatly reduce the camera rig stability. When shooting, it is better to keep the center shaft retracted unless it is a last resort, as it is easier to keep the camera rig stable by distributing the weight to three legs rather than focusing on the center axis.

More information about sevenoak camera slider,camera dolly,camera viewfinder