How to Configure BMW ICOM Next WLAN to enable WiFi connection?

How to Configure BMW ICOM Next WLAN to enable WiFi connection?

1. Run ITool Radar to detect ICOM information

2. Open IE browser and enter ICOM configuration address (based on current real ICOM IP )

3. Select WLAN Settings
Enter WiFi settings
Save Changes.

4. Disconnect LAN cable and restart ICOM, then ICOM will auto connect with WiFi .

5. If using our ICOM software and USB-WIFI, enter configuration as following:
Mode:802.11n,2.4GHz
SSID:ISAP
Security Type: WPA2 Personal
Pre‐shared Key: BmwAp24h

Related posts:

1. How to code BMW F10 F31 F25 with E-Sys or ICOM Ista-D
2. (Solved) ICOM Next Firmware is too new to work with ISTA-P
3. ANY DIFFERENCE BETWEEN BMW ENCODING & CODING
4. How to use BMW ICOM software for Mini R56 diagnostics and programming