ITが好きですか。ITを通して自分の実力を証明したいのですか。IT業界に従事したいなら、IT認定試験を受験して認証資格を取得することは必要になります。勉強者が今しなければならないのは、広く認識された価値があるIT認定試験を受けることです。そうすれば、新たなキャリアへの扉を開くことができます。CCNP Wireless認定資格の300-360試験テストというと、きっとわかっているでしょう。この資格を取得したら、新しい仕事を探す時、勉強者が大きなヘルプを得ることができます。何ですか。自信を持っていないからDesigning Cisco Wireless Enterprise Networks試験テストを受けるのは無理ですか。それは問題ではないですよ。勉強者はKtestの300-360試験テストを利用することができますから。
CCNP Wireless認証が300-360試験に入力するための踏み台であると考えられています。国際的に有名なCiscoガイド会社によって発行され300-360試験問題集の職業証明書を、取得、あなたは関連する専門Designing Cisco Wireless Enterprise Networksのスキルを習得していることを証明しています。そのためCisco研究ガイドの絶大な人気のために、多くの候補者は、それを追求し、Ktestが認証を取得するために彼らの研究のガイドに選択しています。Ktestは、あなたの興味と使いやすさの方法であなたの統合を与える300-360試験の質問と回答と300-360試験準備の様々な材料を持っています。
Share some CCNP Wireless 300-360 exam questions and answers below.
A Cisco 7925 phone at a client¡¯s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully.
What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
An engineer is performing a predictive wireless design for a carpeted office space, which requires voice capability and location services.
Which two requirements are inputs to the design? (Choose two.)
A. overlapping -67 dBm coverage from three access points
B. overlapping -75 dBm coverage from three access points
C. overlapping-72 dBm coverage from two access points
D. continuous -67 dBm coverage from one access pointe. continuous -72 dBm coverage from one access point
Answer: BD
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data. What does this indicate about the signal strength?
A. The area is below the minimum threshold configured on the tool.
B. The area is below the detectable level and indicates no RF signal.
C. The area is below -100 dBm at coverage cell edge.
D. The area is below -67 dBm at coverage cell edge.
Answer: B
What is a common cause for signal attenuation?
A. Cinder block wall
B. Office window
C. Metal door
D. Glass wall
Answer: C
What is a common cause for signal attenuation?
A. Cinder block wall
B. Office window
C. Metal door
D. Glass wall
Answer: C
An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
An 802.11n implementation is being discussed. Users are satisfied with the potential 300450 Mbps throughput of new 802.11n APs.
Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. Clean Air helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
An 802.11n implementation is being discussed. Users are satisfied with the potential 300-450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. CleanAir helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
Ktestは長い歴史を持っているCiscoの300-360試験の参考書が提供されるサイトです。IT領域で長い時間に存在していますから、現在のよく知られていて、知名度が高い状況になりました。これは受験生の皆様を助けた結果です。Ktestが提供したCiscoのDesigning Cisco Wireless Enterprise Networks試験の参考書は問題と解答に含まれていて、IT技術専門家たちによって開発されたものです。CCNP Wireless認証試験の300-360試験を受けたいのなら、Ktestを選ぶのは疑いないことです。
CCNP Wireless認証が300-360試験に入力するための踏み台であると考えられています。国際的に有名なCiscoガイド会社によって発行され300-360試験問題集の職業証明書を、取得、あなたは関連する専門Designing Cisco Wireless Enterprise Networksのスキルを習得していることを証明しています。そのためCisco研究ガイドの絶大な人気のために、多くの候補者は、それを追求し、Ktestが認証を取得するために彼らの研究のガイドに選択しています。Ktestは、あなたの興味と使いやすさの方法であなたの統合を与える300-360試験の質問と回答と300-360試験準備の様々な材料を持っています。
Share some CCNP Wireless 300-360 exam questions and answers below.
A Cisco 7925 phone at a client¡¯s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully.
What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
An engineer is performing a predictive wireless design for a carpeted office space, which requires voice capability and location services.
Which two requirements are inputs to the design? (Choose two.)
A. overlapping -67 dBm coverage from three access points
B. overlapping -75 dBm coverage from three access points
C. overlapping-72 dBm coverage from two access points
D. continuous -67 dBm coverage from one access pointe. continuous -72 dBm coverage from one access point
Answer: BD
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data. What does this indicate about the signal strength?
A. The area is below the minimum threshold configured on the tool.
B. The area is below the detectable level and indicates no RF signal.
C. The area is below -100 dBm at coverage cell edge.
D. The area is below -67 dBm at coverage cell edge.
Answer: B
What is a common cause for signal attenuation?
A. Cinder block wall
B. Office window
C. Metal door
D. Glass wall
Answer: C
What is a common cause for signal attenuation?
A. Cinder block wall
B. Office window
C. Metal door
D. Glass wall
Answer: C
An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
An 802.11n implementation is being discussed. Users are satisfied with the potential 300450 Mbps throughput of new 802.11n APs.
Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. Clean Air helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
An 802.11n implementation is being discussed. Users are satisfied with the potential 300-450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. CleanAir helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
Ktestは長い歴史を持っているCiscoの300-360試験の参考書が提供されるサイトです。IT領域で長い時間に存在していますから、現在のよく知られていて、知名度が高い状況になりました。これは受験生の皆様を助けた結果です。Ktestが提供したCiscoのDesigning Cisco Wireless Enterprise Networks試験の参考書は問題と解答に含まれていて、IT技術専門家たちによって開発されたものです。CCNP Wireless認証試験の300-360試験を受けたいのなら、Ktestを選ぶのは疑いないことです。