Temperature and humidity test chamber level

Temperature & Humidity Walk-in Test Chamber/Cool Room

Product Description

Brief description:
Walk in test chamber is simulation under the condition of product in humid climate environment combination
(high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself.

Does need to be met the requirements of international standard (IEC, JIS, GB, MIL...).International quantum measurement procedures in order to achieve consistency (including test steps, conditions, methods) to avoid different cognitive, and narrowing the scope of measurement uncertainty.


Parameters of walk-in test chamber :
Equipment specification
THS-100UA
THS-150UA
THS-250UA
THS-500UA
THS-010UA
Workroom Dimensions (cm)
50x40x50
50x50x60
60x60x70
80x70x90
100x100x100
Temperature Range
A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C D: -70°C-150°C E. -100°C-RT
Fluctuation/Evenness
±0.5°C/±2°C
Humidity Range
A.10%~98%RH B.20%~98%RH
Humidity Deviation
-2%~-3%
Temperature Rise Speed
1.0°C~3.0°C/min
Temperature Down Speed
0.7°C~1.2°C/min
Time needed for heating
RT°C~150°C≤30min
Time needed for cooling
RT°C~-40°C≤60min
The machine noise
≤72 dB(A)
Load on the largest
≤20kg
Equipment installed power
~3.25KW
~3.55KW
~3.95KW
~5.5KW
~6.25KW
material
The studio:# SUS 304 stainless steel
The outer wall:Cold plate coating/#SUS304
Wind Cycling Way
Centrifugal fan-broadband type forced air circulation
Refrigeration Way
Single stage compression refrigeration
Refrigerater
French Tecumseh
Refrigerants
R4O4A USA Dupont environmental protection refrigerant
Condensing Way
Air-cooled or water-cooled
Heater
Nickel chrome heating wire heater
Humidifier
Semi-closed steam and wet
Water Suplying Way
Automatic cycling water supply
Control instrument
TEMI880 or OYO-8256P or HLS950
Design criteria
GB/T2423/5170/10586 JIS C60068 ASTM D4714 CNS3625/12565/12566
Standard Accessories
1 Observe window(double-deck cavity toughened glass),
1 50mm test hole in the left,
1 PL inner chamber lamp,
2 The sample is put aside frame
1 bag of wet and dry bulb,
3 fuses,
1 power line.
Safety device
Non- fuse-switch(compressor overload,
refrigerant high low voltage,
over-humidity and temperature protection,
Protection switch,fuse stoppage warning system


Applications:

Temperature & Humidity Walk-in Test Chamber/Cool Room
Packaging & Shipping
Temperature & Humidity Walk-in Test Chamber/Cool RoomTemperature & Humidity Walk-in Test Chamber/Cool Room
Company Information
Temperature & Humidity Walk-in Test Chamber/Cool Room

CONTACT:
temperature humidity chambers
+86-023-81987499
info@chinalaboven.com
FOR MORE:chinalaboven
Address
Tongxing Industrial park， Liangjiang new district， Chongqing， China

Temperature and humidity test chamber kit

Product Description
Product Description
Equipment summary:
Xenon ARC Lamp Tester is a comprehensive climate testing machine, can do climatic aging test and
the lightfastness testof polymer materials which exposed at simulated sunlight. It simulates the light, temperature, rainfall, condensing, humidityto test the materials; it can be used for choosing new materials, improving existing materials, or assessment of change in material composition;

Corresponding standard:
GB12831-86 Vulcanized rubber artificial climate (xenon lamp) Aging Test Method
GB/T1644.2-1999Plastics laboratory light exposure test method
GB/T8427-89 textile color fastness test, resistance to artificial light fastness xenon arc
GB/T8430-98 textile color fastness test, resistance to artificial light fastness xenon arc
GB/T1865-97 Paints, varnishes, artificial weather aging and artificial radiation exposure
GB/T16991-97 textile color fastness test,
GB/T5137.3-96 simulated climate test method of resistant to radiation, heat, humidity, burning
GB/T16259-96 color building materials, artificial climate accelerated aging test method.
GB/T2423.24-95 Electronic and Electrical Products Environmental Testing Part II: test method, testing
SQ: Simulation of solar radiation on the ground

Applicable industries of the climatic chamber:
Xenon ARC Lamp Tester applied to control the product quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace,
medical care ... and so on.

Techincal parameterof the climatic chamber:
Model
ZME-2011 Xenon ARC Lamp Tester
Testing room D×W×H
500*600*500mm
index
Temperature range
RT+10°C~80°C
Humidity range
65% to 98%R·H
Spray time
1 to 9999min, abjustable
Spray cycle
1-240min, interval adjustable
spectral wavelength
290nm to 800nm (550w/m2)
light source
Full spectrum xenon lamp (air-cooled)
Xenon lamp power
2.5 kw (longevity: 1600H)
Control
system
Time controller
Import controller from Moeller
Accourate range
Temperature: ±0.1 degree / humidity: ±0.1R·H
Sensor
Platinum resistance Pt 100Ω/mv
Heating system
Independent system, nickel chromium alloy electric heating type heater
Humidity system
stainless steel, external Isolated humidifier
Blackboard temperature
Bimetal thermometer blackboard 55~75 degree
Water supply
Humidification water supply with automatic control, xenon lamp cooled by water recycling
Temperature controller
Import controller
humidity
Irradiation: 30%~65%RH darkly: up to 90%RH
Cycle system
low-noise air-conditioning-type motors, multi-leaf-type centrifugal wind wheel
material
Outside material
Advanced spray color plate /SUS304 stainless steel
Inside material
SUS304 stainless steel
Sample holder material
SUS304 stainless steel
insulation
High and low temperature aging of silicone rubber
standard
a set of radiation-proof glass window, dynamic testing sample shelf 1, xenon lamp tube 2
protector
Leakage, short circuit, over-temperature, water shortages, motor overheating, over-current protection.
Power
AC380V±10% 50±0.5HZ , Three-phase five-wire system
Environmental temperature
±5+30 ≤85%R·H

Detailed Images
Detailed Images


ISO xenon short arc lamp testing chamberISO xenon short arc lamp testing chamber

CONTACT:
temperature humidity chambers
+86-023-81987499
info@chinalaboven.com
FOR MORE:chinalaboven
Address
Tongxing Industrial park， Liangjiang new district， Chongqing， China

Temperature and humidity chamber purpose

Product Description

General purpose temperature humidity climate Apparatus

1.Product description:
Programmable low temperature chamber/temperature test chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.


3. Featurers
1)The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
2)Available in Chinese and English LCD touch screen, easy operation and program.
3)Able to display the relative date and information of the whole operating system in running mode, graphic display. precautions, maintenance and troubleshooting appear on the screen instantly.
4)The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
5)The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
6)Water Supply adopts automatic watering System, Circulating water supply together with water filter.

4.Corresponding standard :
GB11158 Technical conditions for high-temperature testing box
GB10589-89 Technical conditions for low-temperature testing box
GB10592-89 Technical conditions for high and low temperature testing box
B/T10586-89 technical conditions for humidity testing chamber
GB/T2423.1-2001 Low-temperature testing methods
GB/T2423.2-2001 High-temperature testing methods
B/T2423.3-93 Testing Method for humidity Test Chamber
GB/T2423.4-93 Alternating hot and humid testing method
GB/T2423.22-2001temperature testing method
IEC60068-2-1.1990 low-temperature testing method
IEC60068-2-2.1974 high-temperature testing method
GJB150.3 high-temperature testing
GJB150.4 low-temperature testing
GJB150.9 humid testing
5.Our factory
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
6.The pictures
The first one
General purpose temperature humidity climate Apparatus
General purpose temperature humidity climate Apparatus
The second one
General purpose temperature humidity climate Apparatus
General purpose temperature humidity climate Apparatus

CONTACT:
temperature humidity chambers
+86-023-81987499
info@chinalaboven.com
FOR MORE:chinalaboven
Address
Tongxing Industrial park， Liangjiang new district， Chongqing， China

Temperature and humidity chamber calibration

Temperature and Humidity Test Chamber for Calibrating





Product Description

Detailed Parameters:
Model
HZ-80
(A~G)
HZ-150
(A~G)
HZ-225
(A~G)
HZ-408
(A~G)
HZ-608
(A~G)
HZ -800
(A~G)
HZ-1000
(A~G)
Inside size WxHxD (cm)
40x50*40
50x60x50
50x75x60
60x85x80
80x95x80
100x100x80
100x100x100
Outside size W*H*D (cm)
90x136x94
100x146x104
100x161x117
110x171x137
130x181x137
150x186x137
150x186x157
Temperature range
-70 degree ~ +100(150) degree
(A:+25 degree B:0 degree C:-20 degree D:-40 degree E:-50 degree F:-60 degree G:-70 degree)
Humidity range
20%~98%R.H.(10%-98%R.H / 5%~98%R.H is the specific condition )
Accuracy/ uniformly
±0.1 degree ±0.1%R.H./ ±1.0 degree ±3.0%R.H.
Accuracy / volatility
±1.0 degree ±2.0%R.H. / ±0.5 degree ±2.0%R.H.
Heating / cooling time
About 4.0/min(heat),about 1.0/min(cool) ( 5~10/mm is the specific condition )
Inside material
Stainless steel SUS 304 #
Insulation material
High-temperature high-density amino acid ethyl ester foam insulation materials,
Cooling system
Air-cooled/ single-stage compressor(-20 degree) , wind, water cooled/two-stage compressor(-40~-70 degree)
Protection
compressor overload switch, high and low pressure protection switch, over-humidity-temperature protection switches, fuses, warning system
Accessories
recorder(purchase), view window, 50mm testing hole, PL lamp, clapboard, Dry and wet gauze ball
Controller
TEMI300 digital controller from South Korea
Compressor
France Taikang
Power
1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz

Equipment Summary:
PLCTouch ScreenTemperature and Humidity Test Chamber is applied to test the materials in heat-resistance, cold-resistance, dry-resistance, moisture-resistance. It is simple to operate and program easy to edit. It can show the set values and operative time.
Temperature and Humidity Test Chamber for Calibrating
Corresponding Standard of the Temperature and Humidity Test Chamber:
1.GB11158 high-temperature testing condition
2.GB10589-89 low-temperature testing condition
3.GB10592-89 high-low-temperature testing condition
4.GB/T10586-89 humidity testing condition
5.GB/T2423.1-2001 low-temperature testing condition
6.GB/T2423.2-2001 high-temperature testing condition
7.GB/T2423.3-93 humidity testing condition
8.GB/T2423.4-93 alternating temperature testing machine
9.GB/T2423.22-2001 temperature testing method
10.IEC60068-2-1.1990 low-temperature testing method
11.IEC60068-2-2.1974 high-temperature testing method
12.GJB150.3 high-temperature test
13.GJB150.4 low-temperture test
14.GJB150.9 humidity test

Applicable Industries:
TheTemperature and Humidity Test Chamber applied to control the product quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care and so on.




Feature of the Temperature and Humidity Test Chamber:
1.High-texture appearance, the surface handled through the matte stripes, and use of planar non-reactive handles, easy to operate, safe and reliable.
2.Rectangular complex glass window can be viewed the testing sample, windows with anti-sweat heater device that prevents water vapor condensation, and high-brightness PL light.
3.Double-insulated airtight container, which can effectively isolate the internal temperature of leakage.
4.With an external water supply system can be easy to supply water and automatically reuse.
5.Compressor circulatory system from French "Taikang", more effective removal of oil between the condenser and the capillary and use environmentally refrigerants (R23, R404, R507).
6.Controller imported LCD display screen can be displayed measuring values and setting the value and time.
7.Controller with multi-segment program edited, temperature and humidity can be controlled quickly (OUICK) or slope (SLOP) .
8. Built-in mobile pulley easy to move and has a strong positioning screw fixed position

Detailed Images

Temperature and Humidity Test Chamber for CalibratingTemperature and Humidity Test Chamber for Calibrating

CONTACT:
humidity temperature chamber
+86-023-81987499
info@chinalaboven.com
FOR MORE:chinalaboven
Address
Tongxing Industrial park， Liangjiang new district， Chongqing， China

Temperature and humidity chamber box

Reliable Quality Temperature Humidity Box

Introduction:Test material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical appliances,
Communications, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.

Reliable Quality Temperature Humidity Box

High Quality Temperature Humidity Box/chamber/cabinet/oven/

Reliable Quality Temperature Humidity Box
Features:

*.High-texture appearance, the body adopted an arc shape, surface matte stripes processing, and flat-handle, easy to operate, safe and reliable.

*.Rectangular multi-layer glass View window, the use of guinea pigs observed in the test window witt anti-sweat heaters device prevents water gas condensate ,Knot, water droplets, PL fluorescent lamps to keep the inside lighting.

*.Door bunk isolated airtight packing, can be effectively isolated from the internal temperature of the leak
.
*.With external water supply system, convenient to supplement the cylinder water supply, and automatic recovery using.

*.Compressor cycling system used France“Tecumseh”brand which can effectively remove condenser pipe and between
capillary Lubricating oil and whole series adopt environmental protection refrigerant (R23, R404, R507)

*.Controller uses the imported LED display screen, can display measured values and setting time

*.Controller with multi-segment program editor and temperature and humidity can be fast (OUICK) or slope (SLOP) controlled.

*.Built-in mobile wheels allow easy movement and placed and has a strong positioning screw position.

Standard:
GB11158 GB10589-89
GB10592-89 GB/T10586-89
GB/T2423.1-2001 GB/T2423.2-2001
GB/T2423.3-93 GB/T2423.4-93
GB/T2423.22-2001 IEC60068-2-1.1990
High Quality Temperature Humidity Box/chamber/cabinet/oven/
High Quality Temperature Humidity Box/chamber/cabinet/oven/



CONTACT:
humidity temperature chamber
+86-023-81987499
info@chinalaboven.com
FOR MORE:chinalaboven
Address
Tongxing Industrial park， Liangjiang new district， Chongqing， China