Heat press machine introduction

Heat Press Machines is a can in the cup, clothing, bedding, and other items on the hot pattern of the machine,A fine pattern of printing, it can replace and is replacing the traditional embroidery and screen printing, and the cost and effect is much lower than the general embroidery and multi-color screen printing. Tang Hua is mainly applied to clothing, handbags, plush toys, T-shirts, shoes and hats, gloves, socks and so on.
principle:
There are three concepts on the heat press machine, namely temperature, pressure, time. Through the heating plate heat, with a certain pressure will transfer paper and transfer materials together, for several seconds, the transfer paper on the paint or ink is sustained high heat, printed on the transfer material above.
Heat press machine classification:
According to the use of functional points: heat press machine, heat cup machine, heat cap machine, heat plate machine. htv vinyl
According to the operating power points: manual heat press machine, pneumatic heat press machine. Or manual heat press machine, semi-automatic heat press machine, automatic heat press machine.
According to the shape of hot plate: flat heat press machine, arc heat press machine, ring (face) heat press machine.

Heat transfer shaking his head heat press machine to print t shirt advantage

Heat transfer t-shirt is a kind of through the thermal transfer technology, the personalized image transfer to a variety of different materials t-shirt, mainly cotton t-shirt and non-cotton t-shirt.In the production process, the need to use the thermal transfer equipment heat press machine, heat press machine is a very good thermal transfer equipment, almost all of the hot stamping process need to use the heat press machine.Heat transfer MIRACLE company is the heat press machine manufacturers, buy heat machine to find MIRACLE on the right.

T-shirt is generally used to shake the heat press machine, it is more convenient operation, straight tube heat press machine will be touched to the heating plate situation.From the heat press machine technical characteristics, price, quality, brand aspects of a detailed analysis, t-shirt using shaking his head heat press machine more appropriate.Shaking his head Heat press machine pressure is greater, so shaking his head heat transfer machine produced by the heat transfer t-shirt has a higher firmness. Easy to operate, high security.

How to operate laser cutting machine safely!

1, the production work, must be properly used according to the provisions of personal protective equipment, female workers shoulders long hair should be placed in the work cap, or are not allowed to enter the post operation.
 
2, is strictly prohibited to drink to work, work to stick to their posts, are not allowed to slapstick, sleep and do nothing to do with the production of other work.
 
3, must be familiar with the scope of work within the use of a variety of spreader, equipment, tools, process preparation performance, structure. A variety of equipment safety protection device is complete, and check the confirmation of good condition, the prospective use.vinyl cutter
 
4, non-self-operation of the equipment, without the approval of leadership, shall not be arbitrary. Personal use of mechanical equipment, if something left, you must cut off the power, after stopping, to leave.
 
5, the new workers into the factory, must be issued according to the factory "Enterprise Safety Management System," the third chapter of the third chapter of the provisions of security education, education is not allowed to allocate work.
 
6, the workplace should maintain a safe passage. Raw materials, semi-finished products, waste should be stacked neatly, to keep the sidewalk and site clean.
 
7, a variety of mechanical equipment, tools, exposed parts of the exposed, must be installed protective device. Attachment safety equipment such as signal instruments, indicators, etc., to regularly check, are not allowed to dismantle.
 
8, a variety of electrical equipment and lines must be well insulated, the metal shell (including power tools) must take a reliable grounding or zero. Informal electrician is not allowed to pick up electrical equipment and lines.
 
9, the use of crane, we must strictly abide by the implementation of "ten hanging" system, but not on the lifting of the crane on the command crane crane, lifting equipment, handling, to specify the
 
Person is responsible for command. The use of special hanging, the fixture must be checked in advance, are not allowed to foolhardy. It is forbidden to walk or stay under the hanging material.
 
10, multi-homework to a unified command, in close cooperation, not allowed to do their own line, do not listen to the command, the work of two people must specify a person responsible.
 
11, the occurrence of accidents and major accidents, vinyl cutting machineto protect the scene, and immediately report the leadership, the investigation and analysis, waiting for treatment.
 
12, get off work, you must first make the shift work, no successor, to cut off the power, wind, gas (gas) source, acetylene source, and oxygen source, confirm the customs and clean up the site before leaving. Not allowed to unload the oxygen, acetylene hose with the cutter with the lock into the toolbox.
 
13, all cutting equipment should be responsible for the maintenance and use of special.
 
14, the mechanical transmission part should be required to refuel, to keep the equipment accessories complete and clean. Operation part of the application of Vaseline oil.
 
15, laser cutting room to keep clean and dry, non-staff members are not allowed to enter.
 
16, laser cutting machine with acetylene storage tank must be equipped with tempering and explosion-proof film, tempering to prevent water level check once a month.
 
17, acetylene pressurized pump check valve should be added water cooling device, no leakage.
 
18, the lubricating part of the oil can not leak in the cutting knife on the cut, htv vinyl cut Tsui and cutting knife may not leak, plug, so as not to cause tempering.
 
19, the work found in the equipment leakage or failure should immediately stop working, please repair the electrical staff.

Basic knowledge of heat transfer using heat transfer machines

1. Heat Press Machines heat transfer printing film hot stamping temperature at 120 ℃ ~ 240 ℃. Applicable to ABS, AS, PS, PVC, PMMA, PP, PE and other plastic products, metal, wood and other coating surface.
2. Hierarchical sense of rich graphic, you can reproduce the characters, landscapes and high-grade graphic effect, printing graphic clear, accurate, strong adhesion and other characteristics, suitable for large quantities, requiring high plastic products, cultural and educational supplies, Such as packaging. Heat transfer printing film hot stamping temperature of 120 ℃ ~ 240 ℃. Applicable to ABS, AS, PS, PVC, PMMA, PP, PE and other plastic products, metal, wood and other coating surface.
Heat transfer stamping, is a special printing process, its working principle is very simple, through the heat transfer machine heating and pressing the heat transfer paper on the graphic transfer to the product, but in the specific production practice, to improve Product quality, improve production efficiency, need to pay attention to the following:
1.Heat stamping temperature: Heat stamping temperature according to hot stamping equipment, Heat stamping film, Heat stamping different, different heat transfer machine can not blind pursuit of hot stamping the higher the temperature (the lower the better), should be hot stamping After the effect of the benchmark to determine the hot stamping temperature.
2. Heat stamping pressure: Heat stamping pressure must be adjusted to the most appropriate, otherwise it is too easy to hurt the plastic head and was hot, too small and affect the Heat stamping effect. Adjust to the best hot stamping pressure should be tightened after the adjustment, so as not to change in the mass production.

Two types of plane heat press machines

It can be divided into flat pressure Heat press machineand flat push heat press machine two, then what are the two links and differences?
1. Press the heat press machine
It refers to the process of heat transfer process, through the level of pressure on the way, the heat transfer film on the pattern transferred to the plane of the product.
2. Push the heat press machine
It is used in heat transfer processing often used in a heat transfer machine, it is suitable for a variety of materials such as the transfer, such as abs, pp, pc, pe, pvc, after the transfer of good product adhesion, pattern reproducibility Strong.
The connection and difference between the two
Are suitable for hot stamping plane of the substrate and can transfer the product after the reproducibility of the pattern.
Among them, the pressure of heat transfer machinecan only maintain the level of the state of the upper and lower pressure, for the need for bronzing products.
The flat heat transfer machine can be moved back and forth around to transfer products, can be applied to a variety of materials on the product. Such as the plane of daily necessities, cosmetics, toys stationery, tableware, electronic appliances, building materials, kitchen supplies and so on.